Part Location Diagram of WH43X10034 GE Dual Action Agitator
See part 300 in the diagram
Replacing your General Electric Washer Dual Action Agitator
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Dual Action Agitator WH43X10034

 Fits your HTWP1400F0WW!
★★★★★
★★★★★
105 Reviews

Rated by 32 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 75.31
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your HTWP1400F0WW!
PartSelect Number PS1482519
Manufacturer Part Number WH43X10034
Manufactured by GE
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Check if this fits your product and find model diagrams

Need help finding your model number?
Product Description

Dual Action Agitator Specifications

This is a dual-action agitator for a washer. It is an OEM replacement part that is sourced from the manufacturer. The agitator tosses your clothes to clean them efficiently. This plastic dual-action agitator is white in color. It is approximately 18 inches tall with a base diameter of about 12 1/4 inches. No tools are required for this repair. Your agitator has eight tabs that fasten on the drive block of your washer, which is driven by the transmission. This part does not include the agitator coupling kit, which is frequently purchased at the same time as the agitator.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not agitate | Marks left on clothes
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH43X10034 replaces these:
AP3965155, 1256897, WH43X10034, WH43X0138, WH43X0142, WH43X10008, WH43X138, WH43X142, WH43X25442
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

11 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pat
October 3, 2019
Does the agitator sit flush with floor of the washer tub
For model number Gtw180ssjoww
PartSelect logo
Hello Pat, thank you for your question. Yes, it should be flat down on the tub. Good luck with your repair!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Robert
November 12, 2021
Is there a different agitator I can put in this unit? I prefer the lower one like a plate agitator.
For model number Wpre6100G2wt
PartSelect logo
Hello Robert, thank you for writing The manufacture has designed each model with either an agitator or no agitator. Your model number comes with part number PS1482519. They are not interchangeable. We hope this information helps.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Dennis
December 30, 2021
HOW DO YOU REMOVE THE AGITATOR
For model number WDRR2500K3WW
PartSelect logo
Hello Dennis, Thank you for the question. We suggest watching the How to Video for this Agitator. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Carlos
February 4, 2023
My agitator turn clockwise without stop when I check it manually, I dont know if it should stop half of the way and turn conterclock wise another half turn and stop. It is normal or it is a signal that it needs to plastic dogs changed. May be my model dont need plastic dogs or if it working properlly. Thanks
For model number GTAN 4250 D
PartSelect logo
Hi Carlos, Thank you for your question. The agitator should turn 3/4 of a revolution clockwise and then 3/4 counterclockwise. The upper portion of the agitator is driven by directional cogs or "dogs" that are made of hard plastic and can wear out from hard use. If the upper portion of your agitator will turn in either direction or makes a grating sound during the wash cycle, then the directional cogs may need to be replaced. Visually inspect the cogs for discoloration, wear, or damage. You should also look to see if any cogs are missing. If your cogs have any of the symptoms described above, you will need a set of replacement directional cogs. If you have any questions, please let us know. We look forward to hearing from you!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
September 20, 2019
The agitator fins break and catch and tear cloths. It was replaced eight months ago. Now I can't find the correct replacement mine has a top cap.
For model number HSWP1000M2WW
PartSelect logo
Hello Joe, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1482519. The cap PartSelect Number PS12073992 is sold separate. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Travis
November 8, 2021
Pumps out water but don't spin
PartSelect logo
Hello Travis, thanks for your question. Generally speaking, if your washer won't spin you can begin your repair by inspecting the Coupler, Drive Belt, Clutch and Drive Pulley. For assistance locating the parts to purchase, feel free to call Customer Service with your model number. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Kenneth
December 3, 2021
Can the agitator be removed from the washer?
For model number HSWP1000M4ww
PartSelect logo
Hi Kenneth, Thank you for your question. Yes, the agitator can be removed from the washer. There is a video listed with the agitator on our website that you may reference on how to remove/install it. We hope this helps! If you have any questions, please let us know.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Danny
March 8, 2022
My agitator actually only needs the plastic dogs that make the upper portion work. Couldn't seem to find them in parts list. Are these still available or is the agitator sold as one unit?
For model number WHSR2070V2WB
PartSelect logo
Hello Danny, Thank you for contacting us. We have researched the model you have provided and have found this model does not come equipped with Cogs/Dog Ears. Please submit a new question if you have any follow ups. We are looking forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Beverly
May 24, 2023
Purchased new agitator 9 months ago, not used during winter because at cottage - the fins keep breaking - why? Thanks
For model number HSWP1000M4WWW
PartSelect logo
Hi Beverly, thank you for your question. Based on our research, plastics are highly susceptible to breaking when they become too cold. The agitator fins are made of a thin plastic material, and may not have the strength to bear too cold weather. The compatible agitator for your model is part number PS1482519. If you require assistance to place an order, please contact customer service!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Teresa
July 11, 2023
Is there an agitator without the fins to fit my washer
For model number GTWP1800D1WW
PartSelect logo
Hi Teresa, thank you for reaching out. According to our research, this agitator, part number PS1482519, is the manufacturer recommended replacement agitator for your model. This agitator assembly comes with the fins. We hope this information helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
Part Videos

Replacing your General Electric Washer Dual Action Agitator

Replacing your General Electric Washer Dual Action Agitator
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 32 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Lower agitator, very loose and wobbly
Reached down into the washer bowl. Fingers on each side of the agitator base. Quick jolt up agitator popped out adjustable wrench took the bolt. Off of the agitator coupling removed coupling wire, brushed the gear slots installed a new coupling with both new bolt lined up, agitator slots pump, the new agitator on after lined up with a down force quick jolt, then installed the new fabric softener, part on top of agitator
Other Parts Used:
Agitator Cap - Short Agitator Coupling Screw - 1/4-20 MCH HXW 5/8 S
  • jack from SANTA ANA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All of the fins on the bottom had broken due to clothes getting caught in them.
Removed the softener despenser by pulling it straight up, then did the same with the agitator, except I had to turn it a little then pull straight up.
  • Sallie from WEAVERVILLE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy while spinning
I dissasembled the machine and it took about 30 minutes. Orderd the parts recommended for noisy spinning. Reinstalled the new parts / changed all drum straps. Cleaned the drain drum and spin drum and after complete reassembly the washer is still noisy in agitation and spin cycle. The motor,transmission,counter weight,and drum look ok but there is still a reason why the machine is still noisy. Spent 120.00 dollars on parts so far but the drum and motor,transmission and counterweight are very expensive to replace. I am just going to keep using the machine until the washer fails to work anymore. I'm not going to put any more money in the washer. I will just buy a new one. It's not hard to dissasembled and reassemble the washer. I purchased the parts that was recommended to fix the washer but they were not the ones.The new parts did help like the tub seal but the bottom line is that the washer is still noisy. I watched your videos to work on the washer and there were no special instructions on disassembly and reassembly. Like always there must be more than i know to repair this washer. Thanks
Other Parts Used:
Tub Seal Split Ring Agitator Coupling Screw - 1/4-20 MCH HXW 5/8 S Water Pressure Switch Hose Hub Washer Tub Bearing Tub Bearing Washer Tub Dampening Strap
  • Thomas from SELAH, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fins on agitator broke off
Watched the repair video on PartSelect website , repair was exactly as they showed on video , grab old agitator at base , give a quick pull and it popped right off , lined up tabs to coupler with new agitator and gave a sharp push down and new agitator snapped right on. Total repair time was approx 5 minutes .
  • Herb from FARMINGVILLE, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken agitator
I pulled on the bottom edges of the agitator, like the video said, until my fingers were numb. Finally, after I got aggravated, I beat the old agitator into a hundred pieces with a hammer and chisel. Then I slid the new agitator into place and gently tapped on the top of it. It snapped into place and has worked like a new one every since.
  • Randy from CHIPLEY, FL
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken part
We pulled out the old parts and then we got the new parts and we put them in,
  • Oraila from RINCON, GA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator slipping off agitator coupling during operation
Pulled agitator off existing agitator coupling. Removed and replaced agitator coupling. Snapped agitator on. One of the easiest appliance repairs I have ever attempted.
Other Parts Used:
Agitator Coupling Kit
  • William from HUBERTUS, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fin Broke off the Agitator
My wife washed a washable mop head and somehow it managed to break one of the fins off the agitator. I ordered a new agitator, fabric softener dispenser, agitator coupling, and bolt. I figured since I had to replace the agitator I would replace everything. This was super simple and easy. I watched a few videos on getting the agitator off, some people said you may need to run some rope under it to get it off. Luckily mine popped right off. I grabbed both sides and gave it a good solid jerk straight up and it came right off. I used a 3/8 drive socket wrench and a 7/16 socket to remove the bolt from the agitator coupling. I installed the new coupling with a new bolt, lined up the agitator and snapped it right on. Popped in the new fabric softener dispenser and that was it. I may have spent a total of 10 minutes counting unpacking the new parts and carting the old ones out to the trash can replacing this. If you can operate a socket wrench or a new smart phone this is really a piece of cake.
Other Parts Used:
Agitator Coupling Screw - 1/4-20 MCH HXW 5/8 S Fabric Softener Dispenser
  • Keith from STATESVILLE, NC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The agitator "wings" are open at the bottom so any clothes with strings gets caught in these wings and eventually brake the wings off.
I watched the video provided by your site and followed it. I removed the clothes softener part from the agitator, Got a good grip on the agitator and pulled up. It came right off. Aligned the new agitator groves and slid it into place, put the fabric softener part back on! Super easy.
  • Margaret from Chimayo, NM
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The agitator broke off the agitator coupling when I attempted to wash my comforter.
I used a wrench to remove the coupling bolt. I then put the new coupling on and tighten the bolt. I then inserted the agitator over the grooves already molded on the coupling and popped in place. I then inserted the fabric softener on top of the agitator. Done! It took me around 20 minutes to complete the task. Doing the job myself saved me $100 in repair costs. Thanks for excellent customer service!
Other Parts Used:
Agitator Coupling Kit Fabric Softener Dispenser
  • Ronald from FORT PIERCE, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Customer Reviews
Average Rating:
★★★★★
★★★★★
105 Reviews
4.5
Filter By Rating:
  • 5 Stars
    86
  • 4 Stars
    7
  • 3 Stars
    3
  • 2 Stars
    1
  • 1 Star
    8
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
You May Also Need?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482519
Manufacturer Part Number: WH43X10034
Brand
Model Number
Description
General Electric
51451Y1WW
Washer
General Electric
51451Y2WW
Washer
General Electric
56231B0WW
Washer
General Electric
56231B1WW
Washer
General Electric
56231B2WW
Washer
General Electric
56231B3WW
Washer
General Electric
56241B0WW
Washer
General Electric
56241B1WW
Washer
General Electric
56241B2WW
Washer
General Electric
56241B3WW
Washer
General Electric
56251B0WW
Washer
General Electric
56251B1WW
Washer
General Electric
56251B2WW
Washer
General Electric
56421D0WW
Washer
General Electric
56421D5WW
Washer
General Electric
56421DAWW
Washer
General Electric
57051A0WW
Washer
General Electric
57071A0WW
Washer
General Electric
57081A0WW
Washer
General Electric
57271B0WW
Washer
General Electric
57271B1WW
Washer
General Electric
57271B2WW
Washer
General Electric
57281B0WW
Washer
General Electric
57281B1WW
Washer
General Electric
57281B3WW
Washer
General Electric
57281B5WW
Washer
General Electric
57431D0WW
Washer
General Electric
57431D5WW
Washer
General Electric
57431DAWW
General Electric
57431DCWW
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service