Water Valve with 2 Inlets and 3 Outlets Specifications
This is the replacement water valve for your washer. It has 2 inlets and 3 outlets. The water valve connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washer continues to fill after it is full, or if it fills slowly, you may need to replace this valve. Before you begin this repair, be sure to disconnect the water and power sources from your dishwasher. This part is sold individually and is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your General Electric Washer Water Valve with 2 Inlets and 3 Outlets
Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH13X10029 replaces these:
AP4303282, 1475762
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
5.0
Filter By Rating:
5 Stars
9
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim D - January 19, 2022
Verified Purchase
washer repair
my washer now cycles properly. Thank you
★★★★★
★★★★★
Thomas H - April 10, 2021
Verified Purchase
Quality part, almost same as the manufacturer(GE).
The part was exactly as I ordered and in perfect condition. It was easy to install after I did a little research(YouTube). I’ll definitely order from here again.
★★★★★
★★★★★
Rose H - February 8, 2021
Verified Purchase
Easy repair
Easy to repair
★★★★★
★★★★★
Anthony H - November 20, 2020
Verified Purchase
Perfect fit
After reading the customer comments and viewing the installation video the removal and replacement took me half hour. I also didn’t have to move the machine away from the wall.
Thanks!
Tony H.
★★★★★
★★★★★
MICHAEL H - August 19, 2020
Verified Purchase
Easy to replace once the washer is open.
I recommend moving the wiring over one wire at a time. There are two of each color. Also watch the mounting - some valves slide sideways to lock in but this one is all screws. Part totally fixed our problem of constantly running water.
★★★★★
★★★★★
Greg M - July 24, 2020
Verified Purchase
Exact replacement part
Part arrived quickly and was the part described on the web site. Replaced the old valves and the washer is now working perfectly.
★★★★★
★★★★★
Charles F - March 20, 2020
Verified Purchase
Exceptional fast shipping on OEM part.
Quality part and received next day after ordering by 2pm. I fully recommend the company.
★★★★★
★★★★★
Douglas S - March 26, 2019
Verified Purchase
repair ge washer
Washer would not run and had a code 22. Replaced inlet valves and washer was good as new
★★★★★
★★★★★
Barbara A - March 12, 2018
Verified Purchase
Great part
Satisfied with the delivery time receiving the part. It was the right fit and my machine is working well again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
washer would stop at certain points in cycle
Replace the water valve according to the youtube video from this site. It was really easy!
christopher from MINNEAPOLIS, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stops at rise
removed 5 screws, unscrew two more screws, remove the houses and disconnect the wires remove the watter valve.
Felipe from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
12 of 24 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The washer stop and blinks in the RINSE MODE
I called a repair person to check my 15 months old GE front loader washer that stopped in rinse mode. After his inspection he said it was a deffected computer board and it would be very expensive to replace the 3 computers boards inside and it would be cheaper to buy a new top loader washer. The next day I lifted the top cover and foun
... Read mored a taped plastic envelope with instructions titled “For service Technicians Only." On page 2, instruction on to how to enter the washer in to service mode and to test the washer: Press : Signal, Delay, Signal, Delay (within 30 seconds of plug in washer) Then rotate main knob to #102 and press Start:(the washer did a test for finding the problem) , and for me was : E22 , it means : replace solenoid valve assembly. So I order the part from Partselect.com for $58.00 and my Washer runs beautiful, thanks to the instructions inside.
Read less
Miguel from Jacksonville, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
56 of 61 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shawn
November 4, 2017
How do I reconnect the wires? There are six connections - two on the hot and four on the cold. There are blue and brown wires on the cold, blue and yellow wires with black plugs and orange and blue with white plugs on the hot. Valve part number wh13x10029
For model number WBVH5300K0WW
Hello Shawn,
Thanks for your question. The yellow wire goes to one side of the cold water inlet, and orange to the other side of the cold water inlet. The brown wire goes to one side of the hot water inlet valve, and the blue wire goes to all three valves.
I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 23, 2017
Cold water trickles into drum. Maybe the inlet hose screen washer is clogged , can’t get to it. Does this screen come out? Does a new water inlet valve come with the screen?
For model number GFWN1100L0WW
Hi Gary, Thank you for the question. The valve will need to be replaced. The screen will come with the valve as well and can not be removed. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jesse
November 27, 2017
Seems that no water is going in to the tank i tried cold and hot but nothing good water pressure
For model number WBVH5200J3WW
Hi Jesse,
Thank you for your inquiry. If you are getting no water going into the washer, then you will need to replace the water inlet valve. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Randy
December 8, 2017
When time for rinse no cold water checked hose and filter looks clean. Could it be the cold water value?
For model number GFWN1100L1WW
Hello Randy, Thank you for your inquiry. The issue may be with the cold water side of your water inlet valve. You can test the valve with a multimeter to see if it has continuity on both sides. I have also included a link for troubleshooting this issue. The information listed is for if you have no hot or cold water but it would also apply for the issue of no cold water as well. Hope this helps!
https://www.partselect.com/Repair/Washer/No-Hot-Cold-Water/
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
August 21, 2019
The washer will start fine i hear it filled with water and have 36 minutes at the start of the cycle for instants. It’ll get to 24 minutes and completely stop. So i’ll hit the start button again, and it’s almost as if it starts at the beginning of the 36 minute cycle and somewhere along the line it’ll stop again. Lately it seems no water is entering the drum once it gets to a certain cycle and it appears to not be rinsing and tumbling. Is that a water valve issue?
For model number GFWH1200D0WW
Hello David, thank you for inquiring. This is most likely due to a faulty Water Valve, part number PS1482392 for your model. You may also want to consider the Door Lock Latch part number PS1021459. I hope this helps and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Tom
March 26, 2020
Will this 2 in 3 out valve work with my 2 in 2 out hose configuration?
For model number GFW450SPM1DG
Hello, Thank you for your question. You will need to purchase another hose for it to work with your model. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brian
January 27, 2020
I was wondering if i could just purchase the double valve for the cold water side? Also are you in canada? If not do you ship to canada? Thanks for taking my questions
For model number GFAN1000L2WW
Hello Brian, thank you for your question. Unfortunately, the water valve is only available as an assembly. We are in Canada, and It is available for purchase and shipment within Canada. I hope this helps.
Was this helpful?
Thank you for voting!
George
October 18, 2017
Will not go into rinse cycle , but timer advances ? Is this a valve ?
For model number GFWN1000L1WW
Hi George,
Thank you for your question. I would suggest taking a look at your door lock switch. It could be that it is failing and thinks that the door is open and do it will not add water or let your machine go into the spin cycle. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
George
October 19, 2017
Ran through cycle , started in wash and stopped , timer advanced through end and paused .Restarted , same thing .Restarted , went to rinse cycle , water came in drum didnot move, paused , restarted , same thing . Never went to spin ,stopped with 1 minute left . Door latch seems fine , pump seems to be fine ,is this the timer ?
For model number GFWN1000L1WW
Hi George,
Thank you for contacting us. It would be either your timer or your motor that you would want to check at this point. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
JUDY
January 3, 2020
Water does not drain or pump out
For model number gfwh1200h0ww
Hi Judy, the first thing to check would be the drain pump. Thank you for your question and good luck with your repair!
