Quick Question!

Have you ever purchased from PartSelect.com before?

1482363-1-S-GE-WH11X10049        -Dial with Compression Ring
1482363-1-S-GE-WH11X10049        -Dial with Compression Ring 1482363-2-S-GE-WH11X10049        -Dial with Compression Ring https://www.partselect.com/Schematics/GE/00122776i01.gif

Dial with Compression Ring

Your Price

$3.27
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1482363
Manufacturer Part Number WH11X10049
Manufactured by GE

This part works with the following brands: General Electric.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will Not Start.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Timer Knob

Part Number 1482286

White in color.

$4.69
In Stock

Timer Knob Clip

Part Number 270835

The timer knob clip on your washing machine connects the timer knob to the control panel. If your timer knob is damaged or will not stay in place, you may need to replace the clip. If the timer does not advance or the washing machine will not start, this may also be a symptom of a damaged timer knob clip. This part is clear plastic and is about 1 inch in size. Many of our customers have rated this repair as easy, and the only tools you may require are a set of needle-nose pliers. This is an OEM part sourced directly from the manufacturer.

$3.62
In Stock

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

The outer knob will not spin the dial to start the machine. I have to push down on the outer part to advance and start the machine. Do i just need to replace that outer part so that the top knob will advance everything? Tia

Jennifer Saballos for model number WHDSR109J5WW
Answer:

Hi Jennifer, Thank you for the question, I suggest remove each part of the knob to see if there is any damage to the knob. If there is a problem with the knob there will be physical damage you can see. If all parts of the knob are intact you may need to replace the switch behind the knob, Part number PS1482374. Hope this helps!

1 person found this helpful.

Most Recent

Question:

What clip do i need for my model washer?

Gayle for model number WJRR4170G1WW
Answer:

Hi Gayle, Thank you for your question. I have linked the clip for your timer knob down below for you. Good luck with your repair.

Related Parts: Timer Knob Clip
Question:

I bought a new control knob and clip but when i try to put the on the dial with compression ring not tight, just spends around.

Ann for model number gcwp1800d0ww
Answer:

Hi Ann, Thank you for your question. Here is a video that we have showing how this part is installed on your machine: https://youtu.be/wnRj1bNQvrw , hopefully that will clear things up. Good luck with your repair!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 21 reviews What's this?
16-21 of 21
 

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Marie from Deltaville, VA

The control knob teeth broke-could not move it easily

we took off the old control knob-pulls off-then replaced the plastic clip and popped it back on-now the teeth can move the knob to start the washer

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Pliers, Screw drivers, Socket set
Customer: Helen from PALM BCH GDNS, FL

Timer knob was broken and it was falling down from center

First I unplugged the washer and removed the old knob and compression ring hoping that the new ones would be centered. Everything still dropped, so I opened up the panel from the back and found that a very thin plastic piece which held the knob and associated timer behind it in place was broken on one side. I taped the timer in place with duct tape, then made a little support out of some stiff cardboard and taped that underneath the time to support it from below. Then I closed the panel back up and applied the new ring, knob, and clip. So far, everything is working fine! The new knob came with a clip, so I have an extra clip... This was not really very hard, but I had to figure out the additional steps to take because of the broken plastic inside.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Frank from PARMA, OH

Knob kept spinning

Used needle nose pliers

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Dial with Compression Ring
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Reginald from ROCKLEDGE, FL

Indicator dial broken

The dial is held on the cycle control shaft w/a clip. Using a small pair of long nose pliers, pull the clip out of the slot in the control knob. Remove the outer knob exposing the indicator.Easy....

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: david from BRADENTON, FL

Timer knob teeth were stripped. Knob could not turn the wash cycle ring

to remove the timer knob you need needle nose pliers to pull out the clip behind the knob that holds it in place. Also to install the new knob use the pliers to insert the clip.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lou from Pittsburgh, PA

Broken knob

pull of old knob and ring. pull on the new one, it took about two minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-21 of 21

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1482363
Manufacturer Part Number: WH11X10049
Brand Model Number Description
General Electric57731H7WWWasher
General Electric57731H8WWWasher
General Electric57731H9WWWasher
General ElectricGBSR3140H4WWWasher
General ElectricGBSR3140H5WWWasher
General ElectricGBSR3140H6WWWasher
General ElectricGBSR3140H7WWWasher
General ElectricGBSR3140H8WWWasher
General ElectricGCAP1000M0WWWasher
General ElectricGCAP1000M1WWWasher
General ElectricGCAP1000M2WWWasher
General ElectricGCAP1800D0WWWasher
General ElectricGCAP1800D1WWWasher
General ElectricGCSR2090H0WWWasher
General ElectricGCSR2090H2WWWasher
General ElectricGCSR2090H3WWWasher
General ElectricGCSR2090H5WWWasher
General ElectricGCSR2090H6WWWasher
General ElectricGCSR2090H7WWWasher
General ElectricGCSR2090H8WWWasher
General ElectricGCSR2090H9WWWasher
General ElectricGCWN2800D0WWWasher
General ElectricGCWN2800D1WWWasher
General ElectricGCWP1000M0WWWasher
General ElectricGCWP1000M1WWWasher
General ElectricGCWP1000M2WWWasher
General ElectricGCWP1800D0WWWasher
General ElectricGCWP1800D1WWWasher
General ElectricGFSR3110H0WWWasher
General ElectricGFSR3110H1WWWasher