Quick Question!

Have you ever purchased from PartSelect.com before?

1482328-1-S-GE-WH02X10237        -SCR 1/4-20 MCH HXW 5/8 S
1482328-1-S-GE-WH02X10237        -SCR 1/4-20 MCH HXW 5/8 S 1482328-2-S-GE-WH02X10237        -SCR 1/4-20 MCH HXW 5/8 S https://www.partselect.com/Schematics/GE/00122750i03.gif

SCR 1/4-20 MCH HXW 5/8 S

Your Price

$4.02
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1482328
Manufacturer Part Number WH02X10237
Manufactured by GE

This part works with the following brands: General Electric, Hotpoint.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Will not agitate.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 5 reviews What's this?
1-5 of 5
 

46 of 61 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Wrench (Adjustable)
Customer: Jared from georgetown, KY

Agitator will not spin

Agitator would not spin and it was going to cost me I've a hundred soars for someone to come and fix it. I looked on this sight and found out what I thought was the problem and ordered four parts to fix it. I was amazed because they came in two days later. I started withe coupling which was the cheapest part and instaled it and it fixed it to return the other parts I called the 800 number and they emailed me a return authorization and I sent it back so it cost me 15 dollars and five minutes to fix it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

33 of 43 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Diane from Zebulon, GA

Agitator in washing machine not moving

First, I removed the liquid softner dispenser cup from the agitator. Next I gripped the bottom of the agitator and pulled straight up. This was the most difficult part of the repair. Next, I removed the couplier bolt with the appropriate size socket wrench. And then removed the couplier from the transmission shaft. This exposed the shaft. Upon receipt of parts from Part Select, I proceed to install in the reverse order. I slide the new couplier back onto the transmission shaft. and bolted down with new bolt using the original socket wrench. Next I slide on the new agitator making sure the "tongue and groves" matched. Then I placed the liquid softner cup back onto the new agitator. And with great joy my washer is working once more. Thank you Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

19 of 25 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Michael from Lebanon Junction, KY

Agitator came off of spline and broke

The bolt that held the agitator assembly on had sheared off. Had to drill out the old bolt out of the spline. After that, it was very easy. Just bolt the agitator assembly onto the spline and it worked like a charm

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Keith from STATESVILLE, NC

Fin broke off the agitator

My wife washed a washable mop head and somehow it managed to break one of the fins off the agitator. I ordered a new agitator, fabric softener dispenser, agitator coupling, and bolt. I figured since I had to replace the agitator I would replace everything. This was super simple and easy. I watched a few videos on getting the agitator off, some people said you may need to run some rope under it to get it off. Luckily mine popped right off. I grabbed both sides and gave it a good solid jerk straight up and it came right off. I used a 3/8 drive socket wrench and a 7/16 socket to remove the bolt from the agitator coupling. I installed the new coupling with a new bolt, lined up the agitator and snapped it right on. Popped in the new fabric softener dispenser and that was it. I may have spent a total of 10 minutes counting unpacking the new parts and carting the old ones out to the trash can replacing this. If you can operate a socket wrench or a new smart phone this is really a piece of cake.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Customer: Thomas from SELAH, WA

Noisy while spinning

I dissasembled the machine and it took about 30 minutes. Orderd the parts recommended for noisy spinning. Reinstalled the new parts / changed all drum straps. Cleaned the drain drum and spin drum and after complete reassembly the washer is still noisy in agitation and spin cycle. The motor,transmission,counter weight,and drum look ok but there is still a reason why the machine is still noisy. Spent 120.00 dollars on parts so far but the drum and motor,transmission and counterweight are very expensive to replace. I am just going to keep using the machine until the washer fails to work anymore. I'm not going to put any more money in the washer. I will just buy a new one. It's not hard to dissasembled and reassemble the washer. I purchased the parts that was recommended to fix the washer but they were not the ones.The new parts did help like the tub seal but the bottom line is that the washer is still noisy. I watched your videos to work on the washer and there were no special instructions on disassembly and reassembly. Like always there must be more than i know to repair this washer. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1482328
Manufacturer Part Number: WH02X10237
Brand Model Number Description
General Electric57731H7WWWasher
General Electric57731H8WWWasher
General Electric57731H9WWWasher
General Electric57751H3WWWasher
General ElectricEWA5600G0WWWasher
General ElectricEWA5600G1WWWasher
General ElectricEWA5600G2WWWasher
General ElectricEWA5600G3WWWasher
General ElectricEWA5600K0WWWasher
General ElectricGBSR3140H4WWWasher
General ElectricGBSR3140H5WWWasher
General ElectricGBSR3140H6WWWasher
General ElectricGBSR3140H7WWWasher
General ElectricGBSR3140H8WWWasher
General ElectricGCAP1000M0WWWasher
General ElectricGCAP1000M1WWWasher
General ElectricGCAP1000M2WWWasher
General ElectricGCAP1800D0WWWasher
General ElectricGCAP1800D1WWWasher
General ElectricGCSR2090H0WWWasher
General ElectricGCSR2090H2WWWasher
General ElectricGCSR2090H3WWWasher
General ElectricGCSR2090H5WWWasher
General ElectricGCSR2090H6WWWasher
General ElectricGCSR2090H7WWWasher
General ElectricGCSR2090H8WWWasher
General ElectricGCSR2090H9WWWasher
General ElectricGCWN2800D0WWWasher
General ElectricGCWN2800D1WWWasher
General ElectricGCWN3000M0WSWasher