Part Location Diagram of WH01X10313 GE Knob and Clip
See part 19 in the diagram
Replacing your Hotpoint Dryer Knob and Clip
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Knob and Clip WH01X10313

★★★★★
★★★★★
27 Reviews

Rated by 5 customers 

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 13.04
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS1482289
Manufacturer Part Number WH01X10313
Manufactured by GE
Product Description

Knob and Clip Specifications

This knob accepts a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Hotpoint Dryer Knob and Clip

Replacing your Hotpoint Dryer Knob and Clip
Troubleshooting
This part works with the following products:
Dryer, Washer.
This part works with the following products:
Hotpoint, General Electric.
Part# WH01X10313 replaces these:
AP3995201, 1264406
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
27 Reviews
4.3
Filter By Rating:
  • 5 Stars
    19
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    3
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Broken knob and load level pressure switch
Unplug the washer
Remove the three 1/4” screws at the top back of the control panel.
Pull the control panel toward the front slightly and shift it to the right to unlock the three plastic tabs located at the bottom of the control panel.
Lay the control panel forward on the lid.
Disconnect all three wires and the small hose attached to the switch
The pressure switch is simply locked in place by the metal tab that is now facing you.
Use a flat blade screwdriver to pry up on that tab while applying some CCW pressure to the switch, and it will pop out of its holder.
Reverse all these steps to put everything back.
Other Parts Used:
SWITCH PRESSURE Knob and Clip
  • Dave from AMARILLO, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob and on/off knobs split at base, not engaging
Popped off old knobs, popped in new. Sorry, nothin' to it or I would'a yelled HELP!
Other Parts Used:
Knob and Clip Timer Knob
  • Karen from THIBODAUX, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob and clip both broken
I just removed old parts And put the new part on it was very easy to do.
  • Sharon from LAKE CITY, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old knobs were cracked would not turn the timers
Slid off the old part and slid back on the new
Other Parts Used:
Knob and Clip Timer Knob
  • Jim from KINGMAN, AZ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken knob that turned too freely and did nothing
I wasn't sure that a new knob/clip would fix problem b/c shaft wouldn't turn with pliers. But knob was so inexpensive I wanted to try it first. I received the new knob/clip and the dryer worked perfectly; the knob had been broken for a year before it had quit working entirely. Don't let someone tell you that you need a whole new timer before you try the new knob/clip. Still working perfectly and I'm so pleased. And my part arrived within 2 days-wonderful!
  • Terri from DADEVILLE, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

13 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lori
February 27, 2018
The timer control knob broke on my Hotpoint dryer. Unfortunately i did not replace this right away, instead, used a needle nosed plier to grasp and turn the d shaped shaft mechanism. Now this mechanism (the d shaped shaft) has broken and i need to replace. Please advise me.... is it possible to order just a new d shaped shaft plus timer control knob or do i need to order a whole new timer shaft??
For model number HTDX100Ed6WW
PartSelect logo
Hi Lori, Thank you for your question. In order to replace the shaft, you will need to get a new timer. The part number listed under your model number for the timer is PS8746223. The part number listed under your model number for the timer knob is PS1482196. I hope this helps. Thank you and have a great day!

12 people found this helpful.

Was this helpful?
Thank you for voting!
Erving
March 2, 2020
What is the part number for the temperature control knob and the timer knob?
For model number HTDX100EM8WW
PartSelect logo
Hello and thank you for writing. The timer knob is part number # PS1482196. The control knob is part number # PS1482289. We hope this information helps. Please contact us anytime if you require further assistance.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Diane
September 14, 2017
I need a replacement for the knob on my washer. Do I need part #ps1482289
For model number HTWP1400
PartSelect logo
Hi Diane, Thank you for the question. This is the correct knob for your model number and it would control one of the three switches on the left side of the control panel. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Kathy
November 6, 2017
How do you get the knob off. The 2 left knobs just pull off. The setting control for casual and whites to get the machine to run does not come off? Is it easy to replace?
For model number VLSR1090G5WW
PartSelect logo
Hi Kathy, Thank you for the question. The 3 left knobs shoudl all just pull off.For the main timer knob you need to use a pair of needle nose pliers to pull the locking in on the back of the timer switch to release the knob. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bryan
May 21, 2019
The male piece coming from the pressure switch (part#ps1018030) broke off into the knob (part#ps1482289). Is it necessary then that i'll need to replace the pressure switch, knob & clip, as well as the d shaped knob clip?Was hoping there would be a video to illustrate how to remove the backsplash cover :( i look forward to hearing from you! sincerely, bryan
For model number HTWP1400F1WW
PartSelect logo
Hi Bryan, thank you for your question. You would have to replace the switch. If you cannot remove the old shaft from the knob then you would have to replace the knob as well. The d shaped clip actually comes with the knob so you do not have to order that separately. Here is a video on how to open up that control area: https://youtu.be/npXw3mRMLR0. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jen
July 10, 2019
There was a metal piece sticking out of where the temperature knob should go - it seems to have fallen back into the hole - is there an easy way to get it out or will i not be able to use that control anymore?
For model number HTDX100EM8WW
PartSelect logo
Hello Jen, Thank you for the question. The metal shaft is part of a switch behind the panel. You will need to open the panel to reattach the switch or replace of broken. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
David
July 24, 2017
My Hotpoint dryer model#: Htdx100ed3ww with serial#: Za813983c timer control knob must have wore out it is cracked on the plastic part on the back where it can be slid on and off of the shaft. Can you tell me the replacement part number that will work on my dryer.
For model number HTDX100ED3WW
PartSelect logo
Hello David, thank you for contacting us. The timer control knob for your model is PartSelect Number PS1482196. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Debbie
December 28, 2021
Both of my knobs will not turn .the plastic housing where shaft is ,cracked on both,there is still metal inside shaft,but i guess i just need whole new knob?
For model number HTDX100EM8WW
PartSelect logo
Hi Debbie, Thank you for your question. If the shaft on the knobs have cracked, they will need to be replaced. The part number listed under your model number for the knob and clip is PS1482289. The part number listed for the timer knob is PS1482196. If you would like to place an order for these knobs, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Sandra
September 13, 2021
The knob on the Hotpoint dryer broke, this is the serial # td711332c. Which knob fits this dryer?
For model number HTDX100EM7WW
PartSelect logo
Hello Sandra, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS1482196 for the Main Timer Knob and PartSelect Number PS1482289 for the Knob that controls the Push to Start Switch and the Dryer Temperature Switch. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Kelly
October 23, 2019
Which knob do i need for the main control?
For model number HTAP1100F
PartSelect logo
Hello Kelly, thank you for your question. The knob is Part #: PS1482290 and the dial behind the knob is Part #: PS1482361. I hope this helps!

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482289
Manufacturer Part Number: WH01X10313
Brand
Model Number
Description
Hotpoint
HLSR1090J5WW
Washer - Residential
Hotpoint
HLSR1090J6WW
Washer - Residential
Hotpoint
HLSR1090J7WW
Washer - Residential
Hotpoint
HLSR1090J8WW
Washer - Residential
Hotpoint
HNSR3110H0WW
Washer - Residential
Hotpoint
HSWP1000M2WW
Washer
Hotpoint
HSWP1000M3WW
Washer
Hotpoint
HSWP1000M4WW
Washer - WASHER
Hotpoint
HTAP1000M0WW
Washer - Residential
Hotpoint
HTAP1000M1WW
Washer
Hotpoint
HTAP1000M2WW
Washer
General Electric
HTAP1100F0WW
Washer
General Electric
HTAP1100F1WW
Washer
Hotpoint
HTAP1200D0WW
Washer
General Electric
HTAP1200D1WW
Washer
Hotpoint
HTDP120ED0WW
Dryer
General Electric
HTDP120ED1WW
Dryer
General Electric
HTDP120ED2WW
Dryer
Hotpoint
HTDP120ED3WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120ED4WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120ED5WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120ED6WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120GD0WW
Dryer
General Electric
HTDP120GD1WW
Dryer
Hotpoint
HTDP120GD2WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD3WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD4WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD5WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD6WW
Dryer - GAS DRYER
Hotpoint
HTDX100ED0WW
Dryer
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service