Part Location Diagram of WE1M652 GE Timer Knob
See part 7 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Timer Knob WE1M652

★★★★★
★★★★★
274 Reviews

Rated by 32 customers 

Very Easy 

Less than 15 mins 

Ratings submitted by customers like you who bought this part.

$ 19.38
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS1482196
Manufacturer Part Number WE1M652
Manufactured by GE
Product Description

Timer Knob Specifications

This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your user manual and model number to see if this part is right for you. It is a three-inch-diameter part that accepts a D-shaped shaft. To replace your faulty knob, simply pull the existing knob straight off the shaft and install the replacement back onto the shaft. No tools are required. This item is sold individually and is not part of a set. The timer knob contains the insert as well as the knob itself.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Timer Not Working
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE1M652 replaces these:
AP3995164, 1264289
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
274 Reviews
4.7
Filter By Rating:
  • 5 Stars
    230
  • 4 Stars
    22
  • 3 Stars
    9
  • 2 Stars
    5
  • 1 Star
    8
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 32 reviews. What's this?
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing installation instruction that matched.
Timer controller knob broke off and did not leave enough center pole to attach new knob.
Pulled dryer out from wall and used screwdriver to remove back plate and screw holding timer controller. Once loose I then held new part next to old part and switched wires one at a time, afterwards I replaced back and pushed dryer back into position.
Other Parts Used:
Dryer Timer Timer Knob
  • Amy from OGDEN, UT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broke switch and later on the black piece on motor timer.
Unplug dryer, remove screws and panel. Take picture of dryer motor so you will put wires back the same way . Remove screws using Allen wrench, then unplug wires put the new motor on secure, then put wires back on. View the photo make sure the wires are the same. Then plug your dryer back up. And Happy drying..
Other Parts Used:
Push-to-Start Switch Timer Knob
  • Lear from SMYRNA, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob and on/off knobs split at base, not engaging
Popped off old knobs, popped in new. Sorry, nothin' to it or I would'a yelled HELP!
Other Parts Used:
Knob and Clip Timer Knob
  • Karen from THIBODAUX, LA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The start push button and the timer knob were broken because of low quality parts.
These buttons are easy to fix. Just line them up with the D shaped shaft and push the buttons to get them to go on.
Other Parts Used:
Start Push Button Timer Knob
  • Kenneth from GLADYS, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old knobs were cracked would not turn the timers
Slid off the old part and slid back on the new
Other Parts Used:
Knob and Clip Timer Knob
  • Jim from KINGMAN, AZ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer locked up, will not turn
From behind the dryer remove the panel directly behind the timer assembly (6 phillips head screws).
Take a picture at this point of how the wires are attached to the timer assembly for reference during reassembly Then remove wires with pliers. Remove T10 Torx screw that retains the timer assembly in place. Remove timer Knob (pull forward). Rotate timer assembly to pop it out.
From here, twist in new timer, use T10 torx to hold in place re-attach wires and reinstall rear panel
Other Parts Used:
SCR 30 X 20 IA PP Dryer Timer Timer Knob
  • Matthew from Millbury, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
knob broken and the timer shaft was broke off
Very Easy installation. Took the back panel off, disconnected the timer, replaced it with new timer from partselect.com., then I put everything back together and attached the knob. The dryer works great and no more pliers!. Thank you to the associate that help me make sure I had the correct parts, and I am very satisfied with the service. I would Recommend this sight to anyone. Thanks Again.
Other Parts Used:
Dryer Timer Timer Knob
  • Frances A from OSSINEKE, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer was stripped
Just placed it where it belonged.
  • Mary Ann from Buzzards Bay, MA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob kept turning around without clicking
Husband took off the back of dryer and took off old timer and replaced it with the new, put on new knob, worked great, Ordered it on day, and we received it the next day, thank you for the quick delivery.
Other Parts Used:
Dryer Timer Timer Knob
  • Susan from Latham, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Belt thrown off washer
I am so glad I bought the belt installation tool. I tried black ties several times to hold belt slack and kept breaking. I used two stainless steel hose clamps purchased at a local auto parts store. They held the super tight belt to the pulley to be able to install belt with purchased tool to get the belt on motor pulley. Washer is working again.
Other Parts Used:
Belt Installation Tool 6-Rib Drive Belt Timer Knob
  • Tommy from PEARLAND, TX
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

53 questions answered by our experts.
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Theo
July 20, 2017
I’m looking for the timer knob AND the insert, does this part come with both if I purchase? Or do I need to get the other piece separately, pls advise
PartSelect logo
Hi Theo, you are in luck, it does have the insert in it. If you order this timer knob WE1M652 you will not need to order anything else to make this repair. I hope this helps!

49 people found this helpful.

Was this helpful?
Thank you for voting!
Jackie
July 20, 2017
Hi there, my timer knob on my dryer keeps breaking/cracking/snapping off and Im not sure if it’s a poorly made part or if im not installing it right or if theres something else wrong with my machine. In the past two years I replaced it 2X and this will be a third time. What do you think……?
PartSelect logo
Hi Jackie, by the sounds of things your timer knob is sticking and you should replace it and the timer together. This part WE1M654 is the knob and this part WE4M533 is the timer you require for your model. Best of luck with this repair!

28 people found this helpful.

Was this helpful?
Thank you for voting!
Gabbie
July 20, 2017
My dryer is not starting and according to your site a “common problem” is the timer knob …. How will I know this is the problem?
PartSelect logo
Hello Gabbie, great question! You should check your timer knob for visible damage such as cracks and excessive wear. If there is damage present, that is likely your problem and the knob WE1M652 should be replaced. Please let us know if you have any further questions!

17 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
August 27, 2017
Timer knob has crack where it attaches to shaft is this part the right one?
For model number HTDX100EM8WW
PartSelect logo
Hi Mike, Thank you for your inquiry. Yes, this is the correct timer knob for your appliance. Good luck with your repair.

14 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
January 14, 2018
Hi what is the part number for the timer knob for this model. Htdx100ed6ww
For model number Htdx100ed6ww
PartSelect logo
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS1482196. Hope this helps!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Juanito Garlitos
March 21, 2019
The knob for the timer cracked so the timer won't work. I replaced the knob three times already because it keeps on cracking. We used pliers to turn the stick that holds the knob and now the stick broke too but still can be grasped by the plier. What needs to be replaced at this time and which parts do we need. Is it easy to replace the parts?Thank you.
For model number DWSR483GG7WW
PartSelect logo
Hello Juanito, thank you for your question. You will want to change the timer and the timer knob. The timer is PartSelect Number: PS9493080 and the knob is PartSelect Number: PS1482197. Please enter the part number into the site for current price and availability. Good luck with your repair!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Philip
August 16, 2017
I need a new timing knob for this model. I can't to find one.
For model number HTDX100GD6WW
PartSelect logo
Hi Philip, Thank you for your inquiry. According to your model information, this would be the correct timer knob for your appliance. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Thank you for voting!
Eve
March 8, 2018
My old knob cracked. I replaced it with we1m654, but now the drying time is off kilter. It cuts off last of before the off spot. It is a GE dryer. Is this the correct part?
For model number GDTX180ED4ww
PartSelect logo
Hello Eve, thank you for your question. The knob part that you ordered, part number we1m654 is not the right timer knob for your appliance. That is why the timer knob is off kilter. The part you need to order for the timer knob replacement for your model number is WE01X20374. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Terry
March 21, 2018
Does this knob fit my dryer
For model number HTDX100GM8UU
PartSelect logo
Hello Terry, thank you for your question. Yes, Timer Knob WE1M652 is an exact replacement for the timer knob on your specific appliance. Good luck with your repair!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Debbie
February 5, 2019
What are the color cordinance on the timer control? I have red yellow orange and white wires on tge machine and a b c and x on the control box.
For model number Htdx100ed4ww
PartSelect logo
Hello Debbie, thank you for your question. On the timer you'll want to connect yellow to X, white to T, red to B, orange to A and brown to C. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1482196
Manufacturer Part Number: WE1M652
Brand
Model Number
Description
General Electric
61148418
Dryer
General Electric
62140418
Dryer
General Electric
62140419
Dryer
General Electric
62148418
Dryer
General Electric
62148419
Dryer
General Electric
62190419
Dryer
General Electric
62190429
Dryer
General Electric
62190439
Dryer
General Electric
62190449
Dryer
General Electric
62190479
Dryer
General Electric
62198439
Dryer
General Electric
62198449
Dryer
General Electric
62198459
Dryer
General Electric
62198479
Dryer
General Electric
63040459
Dryer
General Electric
63048459
Dryer
General Electric
63190479
Dryer
General Electric
63198419
Dryer
General Electric
63198449
Dryer
General Electric
63198459
Dryer
General Electric
64100119
Dryer
General Electric
64100139
Dryer
General Electric
64100149
Dryer
General Electric
64100179
Dryer
General Electric
64140419
Dryer
General Electric
64148419
Dryer
General Electric
64190439
Dryer
General Electric
64190459
Dryer
General Electric
64198439
Dryer
General Electric
64198459
Dryer
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service