Timer Knob WE1M652 | Official GE Part | Fast Shipping | PartSelect
Timer Knob – Part Number: WE1M652
Timer Knob – Part Number: WE1M652 Timer Knob – Part Number: WE1M652 Timer Knob – Part Number: WE1M652 https://partselectcom.azureedge.net/Schematics/GE/00123007i01.gif

Timer Knob

Product Description

Timer Knob Specifications

This timer knob for a dryer is an authentic replacement part. It is 3 inches in diameter and white in color. It attaches to the timer shaft on the control panel, and controls the amount of time your dryer will run. This knob accepts a D-shaped shaft. No tools are required for this repair, simply pull the existing knob straight off the shaft and install the replacement.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Timer will not advance | Will Not Start

This part works with the following products:

Dryer.

This part works with the following brands:

Hotpoint, General Electric.

Part # WE1M652 replaces these:

1264289, AP3995164.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 30 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
McKinley from Meraux, LA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WE4M532, WE1M652
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
168 of 223 people found this instruction helpful.
Was this instruction helpful to you?
Vanessa from Montebello, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WE1M652, WH01X10141
The knob and timer knob broke, which disabled our dryer from working.
The replacement parts arrived and fit perfectly onto the metal part. It was super easy and now my Dryer is working again. I am so happy I saved myself from buying a new Dryer. My old one is as good as new!
43 of 47 people found this instruction helpful.
Was this instruction helpful to you?
Kenneth from OCALA, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WE1M652
Old timer Knob cracked where clip goes.
I did a search on your site to find out why dryer wouldn't start. It said 25 % of the time it could be the timer knob. Checked my old one sure enough it was cracked.Took old timer knob off and pushed New one back on less than a minute. Thank you for your site. It saved me from costly repairs.
11 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Robert from escondido, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
WE1M652, WH12X10239
Problem turning the washer on and changing cycles
Removed the 4 screws holding the panel in place. Then removed the 3 screws holding the control asm in place. Removed 1 connector at a time installing the connector into the new assembly. Secured the controls asm with 3 screws. Then put the panel back on with 4 screws.
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Zelda from MARIETTA, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
WE1M652
My dryer knob broke.
I simply removed the small black piece and inserted the new knob and it was ready to work. It was so easy and I am very happy. I though I was going to need a repairman but I was able to do it myself. Also, the ordering and delivery was fast and easy!!!!
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Donna from WYCKOFF, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WE1M652, WE1X980
Timer knob was cracked on the inside.
I just pulled off the old knob and put on the new one. Took 10 seconds. I did not need the D-Shaped knob insert clip after all.so glad i found this website.
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Sonya from COLUMBUS, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WE1M652
When my dryer would not come on.
The timer knob was stripped, so it was stuck in the off position. Ordered the "D"-shaped knob and just placed it on the connector and everything is working find.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Mary Ann from LAWRENCE, KS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WE4M532, WE1M652
dryer would not run. The knob was cracked and the little piece inside was broke. Had to use pliers to run 2 loads.
My husband took top off back and went in that way and it was simple to fix. Thank youi
6 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Lizabeth from DIAMONDHEAD, MS
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WE4M532, WE1M652
Timer knob broke for the third time/shaft broke off eventually so had to replace timer as well.
I should have called hotpoint first before ordering part-in other comments this was a common issue with this model. Ordered part through you-which arrived before expected date, was easy enough to replace ourselves. Hot point however was not able to offer any kind of discount because part was not bought through them directly. Again common issue/problem in this model
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Matthew from Millbury, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WE02X20846, WE4M532, WE1M652
Timer locked up, will not turn
From behind the dryer remove the panel directly behind the timer assembly (6 phillips head screws).
Take a picture at this point of how the wires are attached to the timer assembly for reference during reassembly Then remove wires with pliers. Remove T10 Torx screw that retains the timer assembly in place. Remove timer Knob (pull forward). Rotate timer assembly to pop it out.
From here, twist in new timer, use T10 torx to hold in place re-attach wires and reinstall rear panel
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
234 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    197
  • 4 Stars
    20
  • 3 Stars
    8
  • 2 Stars
    3
  • 1 Stars
    6
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS1482196
Manufacturer Part Number: WE1M652
Brand
Model Number
Description
General Electric
677310
Dryer
General Electric
677311
Dryer
General Electric
677312
Dryer
General Electric
677313
Dryer
General Electric
677314
Dryer
General Electric
677315
Dryer
General Electric
GCMX180ED4WW
Dryer
General Electric
GCMX180ED5WW
Dryer
General Electric
GTMP280ED4WW
Dryer
General Electric
GTMP280ED5WW
Dryer
General Electric
GTMP280GD4WW
Dryer
General Electric
GTMP280GD6WW
Dryer
General Electric
GTMX180ED4WW
Dryer
General Electric
GTMX180ED5WW
Dryer
Hotpoint
HTDP120ED0WW
Dryer
General Electric
HTDP120ED1WW
Dryer
General Electric
HTDP120ED2WW
Dryer
Hotpoint
HTDP120ED3WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120ED4WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120ED5WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120ED6WW
Dryer - ELECTRIC DRYER
Hotpoint
HTDP120GD0WW
Dryer
General Electric
HTDP120GD1WW
Dryer
Hotpoint
HTDP120GD2WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD3WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD4WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD5WW
Dryer - GAS DRYER
Hotpoint
HTDP120GD6WW
Dryer - GAS DRYER
Hotpoint
HTDX100ED0WW
Dryer
General Electric
HTDX100ED1WW
Dryer