Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Howard
July 1, 2019
Morning, I have this GE dryer that came with the house and I noticed an open hole where the start switch goes but its missing. Is it possible it does not need it or that someone bypassed it and the switch/wiring is just laying inside main panel? If it is missing how hard would it be to wire it back up again. Thank you
For model number DBSR463EG5WW
Hi Howard,
Thank you for your question. There is a start switch listed under your model number. The part number listed under your model number for the start switch is PS3487203. There is a video listed with the part on our website that you may reference on how to install it. Here is a link to the webpage, https://www.partselect.com/PS3487203-GE-WE4M519-Rotary-Start-Switch.htm?SourceCode=4&SearchTerm=DBSR463EG5WW&ModelNum=DBSR463EG5WW. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carl
October 9, 2019
Is there any way to keep the temperature control switch in place. It keeps coming loose.
Hi Carl, thank you for your question. If the part on the panel that keeps the switch attached to the panel is broken then you would need to replace the panel to fix it. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Carl
October 9, 2019
The temperature control switch will no longer stay attached to the control panel. What comes with the control panel if i order one.
Hi Carl, thank you for your question. None of the electrical parts that the panel covers come with the panel. It is just the control panel like it is pictured in the diagram. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
On/Off switch was broken on the back where it is fastened to the back panel.
This was on my Mother-In-Laws Washing Machine. She must have gotten a little 'mean' with the switch and it broke loose from the back panel.....plastic. I ordered a new back panel and received it fairly quickly, then sent my wife over to put it on. It took her less than 15 minutes to remove the broken one and install the new one. I'm pretty proud of her.....she's very handy with that sort of stuff.
