Backsplash - White WE19M1490 | Official GE Part | Fast Shipping | PartSelect
https://partselectcom.azureedge.net/Schematics/GE/00123084i01.gif

Backsplash - White

Product Description

Backsplash - White Specifications

Also known as Control Panel.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Will Not Start

This part works with the following products:

Dryer.

This part works with the following brands:

General Electric.

Part # WE19M1490 replaces these:

1264254, AP3994841.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Toni
January 1, 2018
The bracket that holds the start button has broken therefore the start button will not work.
For model number Dbxr463eg7ww
Hi Toni, Thank you for the question. The bracket that holds the switch is part of the Backsplash, PartSelect Number PS1482163. In order to fix the issue with the bracket the backsplash will need to be replaced. Hope this helps!

4 people found this helpful.

Was this helpful?
Thomas
November 18, 2017
Damaged dryer backsplash shows part number 175d5558. Will your we19m1490 properly replace the damaged backsplash?
For model number DBXR463EG6WW
Hello Thomas, Thanks for your question. The part number WE19M1490 is indeed the part number for the control panel, also known as the backsplash, and is compatible with both the 175d5558 number and your model. I hope this helps.

1 person found this helpful.

Was this helpful?
Jim
September 24, 2019
The start switch keeps coming loose the mechanism inside fall off and the knob comes off. I’ve taken the back off and reinserted it but it stays for a few days but gets loose and falls off. What do i need
For model number DBXR463EG7WW
Hello Jim, Thank you for your question. If the start switch itself is not able to stay attached because of a broken piece off of the switch, you would need to replace the switch under part WE4M519 for your model. Hope this helps!

1 person found this helpful.

Was this helpful?
Related Parts

Rotary Start Switch

$12.02
In Stock
Jim
September 24, 2019
Do i need the D-shaped knob insert clip. Part number: Ps267091. The knob fits tight when i reinsert it. This is a follow up to my previous question today
For model number DBXR463EG7WW
Hi Jim, thank you for your question. Yes, that part actually mostly acts as a sort of barrier between the switch and the knob so that the inner plastic part of your knob does not wear down from the inside with the continued use of the knob. However in your particular case you do not need to worry about it too much. Both knobs actually already come with that D shaped insert in place. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
MARGARET
October 28, 2017
I need a bach console for my GE dryer model number dbxr463eg7ww and 2 part numbers appear for this item. We19m1491 and we19m1490, which is the correct item? They both look the same.Thnaks.
For model number DBXR463EG7WW
Hi Margaret, Thank you for your inquiry. Based on the model number you provided the part number for the correct backsplash for your appliance is WE19M1490. I hope this helps. Thank you and have a great day!

Was this helpful?
Stephanie
December 20, 2018
Does the backsplash include the little plastic white clips to hiold the switch in place? Or can i just order the plastic clips because i dont need the whole backsplash but i dont see the clips to order only?
For model number Dbxr463gg8ww
Hi Stephanie, Thank you for your question. Yes, the clips are included. I hope this helps. Thank you and have a great day!

Was this helpful?
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
John from JAMESBURG, NJ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WE01X20378, WE4M519, WE19M1490
Bad rotary switch and backsplash
Shut off the Electric at the breaker panel. With a Philips head screw driver took off the metal plate, and slide the backsplash out of its holders. Twisted the three switches, twisting to the left to remove them and replace the back splash, controller, timer switch and installed the new rotary switch with a right twist. There are three wires on the rotary switch, just follow the line of the old switch. Replaced the back metal panel, and turn on the breaker. Replacement takes about 30 minutes along with putting the dryer back in place.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
4 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
part was perfect

brand new and arrived early! no problem installing it!

5
-
Verified Purchase
Installation

Was a lot easier to install than I thought.

5
-
Verified Purchase
Perfect!

The part was easy to find on site, in great shape when it arrived and a perfect fit. Dryer looks brand new.

5
-
Verified Purchase
It was a snap!

This was an easy repair. The underneath side of the plastic molded backsplash has prongs and slots that hold the starter switch, temperature selector, and cycle selector in place. One of the prongs for the starter switch had broken off so replacing the backsplash was the only solution. All you have to do is remove the outside knobs, then (with appliance unplugged from power source) unseat the controls by rotating them CCW, then re- attach to new part. Lacking confidence and having a little difficulty removing the cycle selector knob (I feared breaking something if I used too much force) I decided to call for help. It did not take long to reach a knowledgeable tech guy. He asked for my model # and very quickly we were on the same page. After a short conversation I was able to complete the repair quickly and easily.

Model Cross Reference

This part works with the following models:

PartSelect Number: PS1482163
Manufacturer Part Number: WE19M1490
Brand
Model Number
Description
General Electric
DBXR463EG0WW
Dryer - Electric
General Electric
DBXR463EG1WW
Dryer - Electric
General Electric
DBXR463EG2WW
Dryer - Electric
General Electric
DBXR463EG3WW
Dryer
General Electric
DBXR463EG4WW
Dryer
General Electric
DBXR463EG5WW
Dryer
General Electric
DBXR463EG6WW
Dryer
General Electric
DBXR463EG7WW
Dryer
General Electric
DBXR463GG0WW
Dryer - Gas
General Electric
DBXR463GG1WW
Dryer - Gas
General Electric
DBXR463GG2WW
Dryer - Electric
General Electric
DBXR463GG3WW
Dryer
General Electric
DBXR463GG4WW
Dryer
General Electric
DBXR463GG5WW
Dryer
General Electric
DBXR463GG6WW
Dryer
General Electric
DBXR463GG7WW
Dryer
General Electric
DBXR463GG8WW
Dryer
General Electric
DBXR463PG0WW
Dryer - Gas
General Electric
DBXR463PG1WW
Dryer
General Electric
DBXR463PG2WW
Dryer
General Electric
DBXR463PG3WW
Dryer
General Electric
DBXR463PG4WW
Dryer
General Electric
DBXR463PG5WW
Dryer
General Electric
DBXR463PG6CC
Dryer
General Electric
DBXR463PG7WW
Dryer

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2019, Eldis Group Partnership. All rights reserved.