See part 52 in the diagram
( Grid squares measure 1x1 inch )
Door Spring
$9.84
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS1481851
Manufacturer Part Number WD03X10031
Manufactured by
GE
Product Description
Door Spring Specifications
This door spring is approximately 7 inches long. The dishwasher door spring applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when the unit is opened. If the dishwasher door will not open or close properly, check the tension on the spring by opening and closing the door. Also, check for any damage to the spring itself. A damaged, or fault spring should be replaced to ensure the dishwasher does not link during the washing cycle. Use caution when installing the door spring because the spring is under tension and could snap.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door won’t close | Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD03X10031 replaces these:
AP3994975
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ivan
December 10, 2019
Is the spring wd03x10031 can be used for the above GE diswasher model? Thx a lot!
For model number GDWF460V00SS
Hello Ivan, thank you for your question. The door spring for that specific model is actually Part #: PS10066544. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door falling down
Remove the 2 mounting screws holding the dishwasher to the counter top. Pull forwards a few inches.. make sure you have slack for power and water. Attach bottom of spring and with a pair of pliers stretch the spring and attach to top.
-
RAYMOND from KENILWORTH, NJ -
Difficulty Level:Very Easy -
Total Repair Time:Less than 15 mins -
Tools:Pliers, Screw drivers -
Parts Used:WD03X10031
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Nugraha M - July 8, 2020
Easy to Pick and Repair
Very easy to find this part when I ordered it and also very easy to repair once I received it.
Suzann H - July 16, 2019
Easy to identify needed part and FAST delivery.
Exactly what we needed!
Richard W - July 6, 2018
Difficult to repair.
The part was the correct one but had to hire a professional to install the spring.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1481851
Manufacturer Part Number: WD03X10031
Manufacturer Part Number: WD03X10031
Brand
Model Number
Description