GE/GE_Thumb/00125324i01.gif
See part 101 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

FUSE

★★★★★
★★★★★
19 Reviews

Rated by 15 customers 

Really Easy

30 - 60 mins

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your SCA1001KSS02!
 Fits your SCA1001KSS02!
PartSelect Number PS1481237
Manufacturer Part Number WB27X10928
Manufactured by GE
Product Description

FUSE Specifications

This ceramic microwave fuse is just over an inch in length. It is white in the center, and metal on both ends. This is a 20-amp fuse, and is used to power your microwave. If the touch pad on the microwave becomes unresponsive, the microwave produces little to no heat, or the appliance simply does not turn on, it could mean that your fuse is at fault and needs to be replaced. Because this part contains an electrical charge, remember to disconnect power to the microwave unit before you begin this repair. NOTE: Before you start this repair, ensure that the microwave is unplugged, and the capacitor is discharged. A capacitor stores large amounts of electricity even after your microwave is unplugged.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No heat | Won’t turn on | Touchpad does not respond
This part works with the following products:
Microwave, Microwave Oven Combo, Range, Wall Oven.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB27X10928 replaces these:
AP3994062, 1262970, WB27X0713, WB27X10114, WB27X10247, WB27X10288, WB27X10388, WB27X10474, WB27X1077, WB27X1159, WB27X713
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

24 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sue
September 5, 2019
Microwave only comes on for 8 seconds then shuts off.. pf is on control panel. could it be fuse inside microwave?
For model number JES1451DS1WW
Hello Sue, thank you for your question. The PF indicates a power failure within the unit. We would recommend testing the following parts for continuity. THERMOSTAT Part Number: WB24X10163, THERMOSTAT Part Number: WB27X11100, and FUSE Part Number: WB27X10928. If those parts are fine, the issue is probably with the main control board. I hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
David
July 16, 2021
The microwave just died and has no light or display. Power is good at the outlet. I suspect the fuse but not sure. Do you have any replacement instructions for fuse replacement?
For model number JVM6175SK3SS
Hello David, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. We hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Mary
January 5, 2022
My microwave comes on but does not heat.
For model number JVM1440BD 003
Hi Mary, Thank you for your question. If your microwave is not heating, there are some parts that you will need to check to see which one is causing the issue. You will need to check the fuse, the door switches, the high voltage diode, the magnetron, the hood thermostat and the thermal fuse. We have included a link that you may reference on how check these parts. We hope this helps! Good luck with the repair!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Tom
December 18, 2021
How do I and where is the fuse located
For model number JE1590SH01
Hi Tom, Thank you for your question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it cannot be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. Before starting this repair, unplug the microwave from the electrical outlet. You will also need to discharge the capacitor as it can hold a charge even when not plugged. We have included a link from our website that you may reference on how to discharge the capacitor. We hope this helps! If you have any questions, please let us know.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Frank
October 1, 2021
I have replaced the fuse 20A on my microwave and it keeps blowing out right away. Can you let me know what I’m missing or what I’m doing wrong with please? Thank you
For model number JVM3160RFSSS
Hello Frank, Thank you for the question. This is normally caused by a defective Door Switch. There are three switches in the appliance Lock area. You will need to test each switch to check the continuity. When the defective switch is activated, it can trip the breaker or blow the fuse. We hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Dennis
January 25, 2022
HOW DO I OPEN THE BOX TO REPLACE THE FUSE? WHAT SPECIAL TOOLS DO I NEED?
For model number JES1460DS3WW
Hello Dennis, Thank you for the question. The fuse is located on the top right of the microwave near the front. Accessing it will require the top and side panel to be removed if it can not be viewed from the front. If you are not familiar with Microwave repair we suggest a repair man. The Microwave can hold a charge even when not plugged in and will need to be discharged before the repair. You will need a screw driver, no special tools. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ronnie
November 16, 2021
What replacement fuse should I use 20A?
For model number JVM3160RF5SS
Hi Ronnie, Thank you for your question. The part number listed under your model number for the fuse is PS3486694. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Mussarat
February 24, 2022
I have model the plate will not turn.
For model number JEB1860DM2BB
Hello Mussarat, thank you for writing. We have researched the model you have provided and have found the part you are looking for may be the Synchronous Motor PS953598. This motor rotates the glass turntable in the microwave. We hope to hear from you soon.

Was this helpful?
Thank you for voting!
Christopher
April 25, 2022
Microwave stopped heating, want to change fuse first but I need to know how to do this. Second turntable keeps turning replaced one door switch but found that there are 3 switches which one or do I have to replace all 3 thanks for the help
For model number RVM1535DM2BB
Hello Christopher, thank you for the question. If the fuse was blown the appliance would not power on as it cuts power to the appliance once blown. The No Heat can be caused by a faulty door switch as well. Only way to know what switch is the issue is testing all three with a multimeter to check the continuity. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Dave
April 26, 2022
GE Microwave oven Model #JVM1650SB004 still heats food. No interior lights. Turntable doesn't turn. Low humming sound when power on.
Hi Dave, Thank you for your question. If your tray is not turning and the lights are not coming on, you will need to check the turntable coupler, the turntable drive motor, the light socket, the light bulb and the door switches. If you are hearing a low humming sound when the microwave is in use, it is likely coming from the magnetron. It may be defective and it may need to be replaced. If you need to replace the magnetron, for safety reasons you will need to discharge the capacitor before doing this repair. Here is a link from our website that you may reference on how to discharge the capacitor, https://www.partselect.com/Microwave+discharge-capacitor+repair.htm. We have included some other links that you may reference on how to check the other parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Customer Repair Stories
 Average Repair Rating: 3.8 / 5.0, 15 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Microwave completely stopped working
Turned out the issue was easily solved by replacing a single, inexpensive fuse.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
  • Kim from Cliffside Park, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
893 of 1147 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave not heating
Rmovd top vent screen. Removed control panel. Removed fuse cover panel. Replaced fuse. Removed housing of door switches. Removd wiring from door switches and and removed door switches from housing. Replaced with new switches and re-connectd wiring. Re-attached panels.
Other Parts Used:
SWITCH MICRO Primary Door Interlock Switch
  • Steven from Manassas, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
165 of 262 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Some smuck put a metal object in company microwave
found fuse blown and heat damage to TCO sensor.
Other Parts Used:
Oven Cavity Thermal Cut Out
  • Jacob from Brewster, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
72 of 131 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I diagnosed the problem incorrectly: based on a previous repair.
The old fuse is perfectly good. The new ones arrived within a day.
  • Ralph from Brandon, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
61 of 128 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
appliance stopped working -- no readout on screen
1. turned off electricity -- unplugged the unit 2. removed 3 screws on top of top vent, removed vent screen then I located the little white cylindrical fuse and popped it out with a table knife. Then I popped in the new fuse. Replaced the vent screen and screws -- plugged in the appliance and it is working again.
  • Carolyn from ARMONK, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
16 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Suddenly had no heat. All else worked fine. A deep odd hum sound.
This did not fix my problem. I've ordered a new microwave.

First off, UNPLUG THE MICROWAVE.

The fuse is located under the plastic grill at the top of the microwave. It's held on by two screws. Once you've removed the screws and taken off the plastic grill, you go to the right side of the microwave and remove another screw that holds a small metal grill in place. Removing the small metal grill is probably the toughest part of this repair. You kind of have to rock it back and forth a bit to get it to release. Once that's off, you can get to the fuse. I removed the burnt out one with a pair of needle nose pliers. I also put a small piece of cardboard under the fuse when I did this so I didn't accidentally drop it into the innards of the microwave. I did the same thing when I replaced the new fuse. I then plugged the appliance back in and made sure it worked. Once that was confirmed, I replaced both grills.
  • Katherine from WILLIAMSTOWN, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Touch pad failed to respond to any programming effort
Went to onlin source, found a couple youtube videos then went to the GE site which had a not-too-easy that find trouble shooting guide. It was extremely helpful as it described a fuse as a fix 80% of the time for touch paid failure. I really didn't believe it would b a fuse, but it was the cheapest fix, $8. I got the fuse and was surprised to fine there are two of them on this model. I took a guess and replaced the top one ( neither fuse was black or burned to indicate a failure but the top one was a bit mor greyish). put it all back together and it works fine.
  • charles from SARASOTA, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
microwave stopped working
took off upper grille and touch pad and removed the old line fuse and replaced with a new fuse ...turned on it is working fine...sources of help: UTube and GE manuel
  • John from OWOSSO, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Blown fuse in microwave
One small Phillips screwdriver and one fuse puller (I used cord). Unplug unit. Remove the two screws on the vent face plate. Remove the one screw on the panel assembly. Gently let hang. Pull the fuse located on the upper left wall. Replace fuse. Reassemble.
  • Frank from VIPER, KY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave was accidentally overheated and all power was lost.
Since I didn't know if it was the current fuse or the flame sensor, I ordered both parts, and, I had to order the tamper proof torx bits needed to remove the microwave cover ($7.45 on Amazon). Once the cover was off the unit, both parts were easily accessible on top of the oven and were replaced in only a couple of minutes.
Other Parts Used:
Flame Sensor Thermostat
  • Charles from PAWLEYS ISL, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
19 Reviews
3.9
Filter By Rating:
  • 5 Stars
    11
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    4
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1481237
Manufacturer Part Number: WB27X10928
Brand
Model Number
Description
Kenmore
36362702200
Microwave
Kenmore
36362709200
Microwave
Kenmore
36362709300
Microwave
Kenmore
36363672200
Microwave
Kenmore
36363672201
Microwave
Kenmore
36363673200
Microwave
Kenmore
36363674200
Microwave
Kenmore
36363674201
Microwave
Kenmore
36363679200
Microwave
Kenmore
36363679201
Microwave
Kenmore
36363692301
Microwave
Kenmore
36363692302
Microwave
Kenmore
36363692303
Microwave
Kenmore
36363693301
Microwave
Kenmore
36363693302
Microwave
Kenmore
36363693303
Microwave
Kenmore
36363694301
Microwave
Kenmore
36363694302
Microwave
Kenmore
36363694303
Microwave
Kenmore
36363699301
Microwave
Kenmore
36363699302
Microwave
Kenmore
36363699303
Microwave
Kenmore
36363703600
Microwave
Kenmore
91141485890
Microwave Oven Combo
Kenmore
91141485991
Microwave Oven Combo
Kenmore
91141485992
Microwave Oven Combo
Kenmore
91141485993
Microwave Oven Combo
Kenmore
91141485994
Microwave Oven Combo
Kenmore
91141485995
Microwave Oven Combo
Kenmore
91141485996
Microwave Oven Combo

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service