LG/LG_Thumb/148993-3.gif
See part K250 in the diagram

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

ROLLER ASSEMBLY

★★★★★
★★★★★
54 Reviews
$ 35.31   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12749664
Manufacturer Part Number 4581EL2002H
Manufactured by LG
Troubleshooting
This part fixes the following symptoms:
Noisy | Will not tumble
This part works with the following products:
Dryer.
This part works with the following products:
LG, Kenmore, General Electric.
Part# 4581EL2002H replaces these:
4581EL2002A, 4581EL2002B, 4581EL2002C, 4581EL2002D, 4581EL3001A, 4581EL3001C, 4581EL3001E, 4581EL3001F, 4581EL3001M
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 7 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Dryer making a thumping and squealing noise when running
    Had to replace front drum support rollers. Removed screws underneath top in back that held bracket that keeps top in place. Slid top towards rear and lifted up. Removed 4 screws that hold plastic front panel in place (inside..2 on each corner) Unplugged front panel electric plugs to remove panel. Opened door..removed 2 screws at bottom of door opening. Removed screws on top of front panel. Unplugged door switch plug. Removed front panel. Removed right front roller with 9/16th wrench for nut. Adjustable for back of stud. Lifted up on drum to get roller out. Reversed to install. Left roller a bit harder to get to stud. Removed and installed same as right side. Did not attempt to replace rear rollers. Have them if needed but very much more involved to replace.
    • Mark from WAVERLY, OH
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Wrench (Adjustable), Wrench set
    • Parts Used:
      4581EL2002H
    28 of 32 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    LG dryer making loud noise (older model)
    I followed a Repair Clinic Urube video except the video had a model with the controls in front and my dryer has the controls on a back panel. The difference was in how to get the top of the dryer off after removing all the screws. The video
    said to push back on the top panel which did not work because of the back controls. Instead I had to push up on the front to release it and then push back. The rollers were also in a slightly different place but were easily found and replaced. The dryer is now back to normal.
    • Darline from DREXEL, MO
    • Difficulty Level:
      Easy
    • Total Repair Time:
      1- 2 hours
    • Tools:
      Screw drivers, Socket set, Wrench (Adjustable)
    • Parts Used:
      4581EL2002H
    5 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Front dryer bearing was sezied and out of round
    I followed the video instructions that were supply on your site
    • STEPHEN from EAST TAWAS, MI
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Wrench set
    • Parts Used:
      4581EL2002H
    5 of 6 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Drum roller seized up
    Handed the parts to my son-in-law he's very mechanically inclined had the job done in 20 minutes
    • chet from WIMAUMA, FL
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    • Parts Used:
      4581EL2002H
    4 of 5 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Noisy when drying. A bumping noise
    Watched the video a couple of times. After that it was a breeze.
    • Arthur from SOUTHLAKE, TX
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Socket set, Wrench set
    • Parts Used:
      4400EL2001F, 4581EL2002H
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Very noisy when running
    We bought 2 roller wheels to replace the ones up front that turn the drum. We watched a video prior to ordering the parts, then followed along with it as we did the repair. It was really easy to complete, with the hardest part being getting some of the screws to loosen at first. Now it purrs like a kitten. We are so happy to have silences the racket. One wheel was completely worn away, with shreds of rubber sitting inside the cabinet.
    • CAROLYN from LEBANON, TN
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Socket set
    • Parts Used:
      4581EL2002H
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Screeching during operation
    Found disassembly video and watched several times. Suspected that one of the drum wheels had seized up. Found extreme volume of lint and hair inside unit as well as a dryer sheet melted on top of heating unit. Front left drum wheel was worn down from lint and hair jamming its movement. Video made it easy, not a really complicated piece of machinery. Replaced all 4 wheels due to normal wear on other three. Wanted to be sure drum evenly balanced on all 4. Parts came quickly and were easy to install. My sister and I did this together. Would not recommend doing it alone. Took time to vac and wipe down entire unit. Now it runs so quiet we have to look to see if it is operating. Got a brand new machine out of it, saved a couple of hundred dollars in repair bills, and found 11 cents inside the machine. For your own piece of mind, if you have had your dryer for several years, you need to open it up and clean it out. Its not hard... added note, we are both in our 60's... so if we can do it so can you.... Such a feeling of accomplishment, can't buy that in a store....
    • CAROL from NAMPA, ID
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      More than 2 hours
    • Tools:
      Pliers, Screw drivers
    • Parts Used:
      4581EL2002H
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      54 Reviews
      4.6
      Filter By Rating:
      • 5 Stars
        44
      • 4 Stars
        5
      • 3 Stars
        3
      • 2 Stars
        0
      • 1 Star
        2
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service