Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Arabella P - December 13, 2018
Verified Purchase
Simple repair
Not an exact match but probably harder wearing than the original.
The video instructions made it simple to replace b
★★★★★
★★★★★
Connie M - April 19, 2018
Verified Purchase
Looked a tad different but fit perfectly
The part was exactly what we needed and the dishwasher is up and running!
★★★★★
★★★★★
Paul B - January 26, 2018
Verified Purchase
Disappointed, manufacturer produced hose 1 and a half inches shorter than original
Subject: RETURN PART# PS1524989 Order # 10751239
I just received my part, water inlet tubing and it is 25.5 inches long. The trouble is the hose it was designed to replace is 27 inches. The inch and a half shortage doesn't allow for the ends to go all the way on the inlet ends and even if you try just putting them on half way it still forces the hose to flatten around the lower "bend" which would cut off the water from getting any further up the hose. To have this hose not the exact same length is ridiculous. Unless this hose was just a miscut that didn't get caught by quality control and you check to measure a new one for the correct length , Frigidaire needs to correct this issue. As I can't wait for that to happen I need to effect a return of this item.
July 4, 2018
Thank you for your review. I’m sorry to hear that happened, From reviewing your order, we show that you have already contacted our customer service line to have the issue addressed. If there is anything we can do for you in the future, please let us know.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher Sprang a Huge Leak
I pulled out the dishwasher and found the inlet tubing had a tear in the accordion part of the tube. I searched online for the model number and was directed to PartSelect. I ordered the inlet tubing, and it only took a few days to get to me. I then watched the video and was able to install the new tubing.
PartSelect is a life
... Read moresaver and I saved lots of money by not having to call a repairman.
Read less
Rita from MEDANALES, NM
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water inlet tube had worn a hole in it
Removed old hose and went to install new hose from Part Select. Part received was not the same as advertised. It was 6-8 inches shorter than the original hose. Would not make the necessary turns because of shorter length. I even went to Video instruction on installation even though I have been in Machine repair for 30 years , this video s
... Read morehowed using the shorter hose and when installed in the video hose also had a kink because of hose length. Had to stop repair and go to hardware store and purchase a longer hose. This purchased hose from the hardware was 50% cheaper and actually worked. I also paid for 2-3 day shipping and received part 7 days later. I am very disappointed with Parts Select and am an owner of an Equipment Rental Facility and will never utilize Parts Select again.
Read less
Michael from MARSHALL, MI
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Original hose needed replacement due to leaking holes
The replacement hose was not as long and the original and therefore did not fit into the track made for the original one. Though it was long enough to work, an additional 4 inches would have been an exact fit. As a result, the replacement had to be duct taped to the side of the dishwasher to hold it in place. Otherwise, the new hos
... Read moree was of better quality that the flimsy original. All in all, I could have picked up 3 feet of rubber hose from an auto parts or hardware store cheaper and done the job just as well, if not better.
Dishwasher not cleaning dishes, found it not filling with water because hose was ruptured
Turned off elecrtic and water to dishwasher and pulled dishwasher out from under cabinet. Removed broken hose using pliers to open hose clamps. installed new hose.
Jimmie from Houston, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water fill hose leaked.
It is rather easy to repair. After you remove the screws that secure the top of the dishwasher to the countertop you can slide the disherwasher out far enough to gain access to the hose. The hose pulls off after you slide the spring clips down the hose far enough so they no longer grab. Then simply reverse the order and you're done. Less
... Read more than 30 minutes and you should no longer have to hand wash your dishes!
Read less
Thomas from Wheaton, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
7 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old hose was split
The Parts finder was the big help. After that all that was needed was to loosen the clamps and replace the old hose with the new one A piece of cake. Slide the washer back into place and replace the screws that hold it to the counter. Out and back in, 30min. top end to complet the job
Sandra R. from Groveland, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
14 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
April 23, 2023
How long is the water fill rubber hose that runs from the valve to the tub??
For model number FFBD2409LS0A
Hi Brian,
Thank you for your question. The tube is 25-1/2 inches long.We hope this helps!
Was this helpful?
Thank you for voting!
Ti
May 11, 2023
Are these hoses generic? Will it fit Kenmore model 58716079200 dishwaser?
For model number 587 16079200
Hi Ti,
Thank you for your questions. We only provide brand new OEM parts and the water inlet tube will work on your dishwasher. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12746654
Manufacturer Part Number: 5304523457
