
DISPLAY MODULE 12029207
Fits your HDI8054U!
$
199.69
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your HDI8054U!
PartSelect Number PS12742171
Manufacturer Part Number 12029207
Manufactured by
Bosch

Check if this fits your product and find model diagrams
Need help finding your model number?
Troubleshooting
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Bosch.
Part# 12029207 replaces these:
00758968, 758968
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Laurel M - October 20, 2023
Verified Purchase
Great Part
The part arrived in great condition. Saved our stove. Was an easy install. Thank you!
Tim F - February 28, 2020
Verified Purchase
Super fast shipping, part was in perfect condition
Super fast shipping, part was in perfect condition.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control panel would randomly flicker, fade to black or become non-responsive when subjected to the heat/steam of the open range.
Watch the YouTube video.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Turn off power or unplug the range.
Remove 5 gas control knobs.
Remove four T20 screws on Control panel. one on each end, L and R, two underneath, L and R.
Pull off control panel and carefully flip it up onto the range, being careful not to stretch the wiring harness.
Carefully remove two wiring connectors (pinch and pull method)
Remove four T20 screws securing the Control panel mount then turn it over 180 degrees.
Straighten the mounting tabs until the control panel easily slides off of its mount.
Remove and replace the control panel and sheet.
Reverse the procedure to reinstall.
It took me longer to clean the components and the area that to repair the problem.
Tip: Isopropyl alcohol in a spray bottle and a cloth cuts the grease and grime, if needed, with very little effort and no scratching.
Other Parts Used:
-
Alan from COLUMBUS, NJ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
October 5, 2022
The display is blank but the stove will not respond to inputs of the keypad. Example: We can press 4,0,0, Bake and nothing happens. Could the display being out also disrupt function?
For model number BOSCH HEI8054U
Hello Craig, thank you for your question. We have researched your model and found that the issue is probably with the Front Panel, part number PS11759846. If that does not take care of the issue, then the problem is most likely to be related to the Display Module, part number PS12742171. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
Phil
October 27, 2022
Control module goes on and off but keeps time and allows us to use the stove.
For model number hei8054u
Hi Phil, thank you for reaching out. According to our research on the model, the Display Module appears to be faulty and you may need to replace it with part number PS12742171. If you require assistance placing an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
John
April 25, 2023
Oven display light not working? Other wise range works fine
For model number HE18054U/03
Hi John, thank you for reaching out. We believe your range is having this problem because of the faulty display module, part number PS12742171. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Nicolas
June 9, 2023
Hello , the number 4 on the screen is not working anymore , is it the part I need to replace the screen only ? If not , witch one do I need ? Thanks
For model number HBN8451UC
Hello Nicolas, thank you for the question. You may need to replace the entire display to fix the issue. The display board for model number HBN8451UC (01) is part number PS12742171. The display board for model number HBN8451UC (02) is part number PS10057855. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12742171
Manufacturer Part Number: 12029207
Manufacturer Part Number: 12029207
Brand
Model Number
Description
