Oven Temperature Sensor

Hello Janice, Thank you for the question. We suggest testing the Oven Temperature Sensor first. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the Sensor is good, you may have a defective Electronic Clock Timer, PartSelect Number PS1528267. We hope this helps.

thank you for your question. There are a few parts that could cause this issue in your appliance. Your sensor is testing in working order. The temperature sensor should be reading between 1000 - 1100 ohms. I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. If those three parts are fine however, then the issue may be in your control board. Good luck with your repair.

Hi Kevin, Thank you for your question. If the oven is not turning on, there are some parts that you will need to check to see which one is causing the issue. You will need to check the oven elements, the oven sensor, the electronic control board an the wiring between them. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!

Hi William, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multi-meter. When testing the sensor with a multi-meter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. We hope this helps. Thank you and have a great day!

Hi Carol. This works for gas models and is compatible with model ffgf3005mwa. Thank you for your question and good luck with your repair.

Hello Clete, Thank you for the question. You will need to Re-adjust Oven Air Shutter until you have the proper flame height and color. Hope this helps!

Hello Dennis, Thank you for the question. I suggest testing the Oven Temperature Sensor, PartSelect Number PS12724046. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

Hello Sam, Thank you for the question. You will need to pull the appliance out and remove the back panel. This will expose the probe. You can unplug and remove the probe and replace with the new probe. Make sure to turn power off to the appliance. We hope this helps.

Hi Gini, Thank you for your question. Sensors can be manufactured differently for different models. It is important that you use the model number from your oven, so can get the correct part. If you have a bottom drawer where you store pots and pans, the model and serial numbers may be found on the left or right frame that the drawer shuts onto. If you do not find it here, here is a link from our website that you may reference on some other locations where your model number may be, https://www.partselect.com/Find-Your-Range-Model-Number.aspx. We hope this helps! Good luck with the repair!

Hello Sabrina, thank you for contacting us, Normally this is caused by a Oven Sensor. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!