Install videos!
12723930-1-M-Whirlpool-W11366227-Washer Dispenser Hose
Part Location Diagram of W11366227 Whirlpool Washer Dispenser Hose
See part 14 in the diagram
Replacing your Maytag Washer Washer Dispenser Hose
( Grid squares measure 1x1 inch )
12723930-1-S-Whirlpool-W11366227-Washer Dispenser Hose 12723930-2-S-Whirlpool-W11366227-Washer Dispenser Hose 12723930-3-S-Whirlpool-W11366227-Washer Dispenser Hose Part Location Diagram of W11366227 Whirlpool Washer Dispenser Hose Replacing your Maytag Washer Washer Dispenser Hose
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Washer Dispenser Hose W11366227

★★★★★
★★★★★
8 Reviews

Rated by 6 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 28.66
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS12723930
Manufacturer Part Number W11366227
Manufactured by Whirlpool
Product Description

Washer Dispenser Hose Specifications

This dispenser hose is for washers and carries the contents of the dispenser drawer to the washer tub.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Washer Dispenser Hose

Replacing your Maytag Washer Washer Dispenser Hose
Back to Top
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Whirlpool, Kenmore, Inglis.
Part# W11366227 replaces these:
AP6888222, 8540063, W10583436, WP8540063
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.6
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David D - April 27, 2023
  Verified Purchase
Hose worked well.
The YouTube how-to install was very helpful and the product was delayed in delivery due to bad weather.
★★★★★
★★★★★
Jeffrey J - February 20, 2023
  Verified Purchase
perfect fit
fast shipper and part worked great
★★★★★
★★★★★
Marc P - September 9, 2021
  Verified Purchase
Part is perfect, arrived in time
The hose was exactly as advertised, and arrived on time. The video instructions were awesome, thank you.
★★★★★
★★★★★
Timothy M - January 29, 2021
  Verified Purchase
Part stopped washer leak
The hardest part is taking the washer apart to get at the leaky hose and putting it back together. The old hose allowed water to leak around it during heavy loads. Pulling the old hose and installing the new one took about 2 minutes. I have taken the washer apart so many times looking for the leak that I can strip it down and put it back together in about 10 minutes. By the way, the bellows was not leaking like I thought.
★★★★★
★★★★★
David D - March 10, 2020
  Verified Purchase
OEM Part Fit Perfectly
After installing a replacement door boot the week before, performing this repair was straight-forward. Getting the door boot back on is the only tricky part, but patience and taking your time should work. The original hose for our washer developed a couple of holes somehow - not sure since there was no obvious rub point, but the replacement should last for the remainder of the washer life. Quick delivery and helpful video on youtube - thank you!
★★★★★
★★★★★
Jarod B - September 14, 2018
  Verified Purchase
Hose, dispenser to tub
Hose is just like described
★★★★★
★★★★★
Silvia H - September 2, 2018
  Verified Purchase
Easy job!
The part arrived on the day it was expected. I didn’t have to go out searching for the hose at all! Thank you!
★★★★★
★★★★★
John C - April 18, 2018
  Verified Purchase
Wrong part.
Part was in good condition, but it was the wrong part. There was two hoses from the dispenser to the drum listed, this was not the one I needed. I have found the other hose but, it was on a different diagram. I have already ordered the other hose from you.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 6 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
When washing there was a water leak
I simply followed the video instructions which was presented very clear and the video shots was on point
Other Parts Used:
Washer Dispenser Hose Front Load Washer Bellow - Gray
  • George from New Castle, DE
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking from what appeared to be from around the concrete counterweight
After further investigation I realized that the original dispenser hose from the soap bin to the inner tip was the cause of the leak. Before this repair, I replaced the bellows. And as part of that replacement process you have to remove the washer dispenser hose from the inner tub so that I could complete the bellows installation. However when I put everything back together the old washer dispenser hose was leaking terribly. This was fixed easily with a new hose and an 1-1 3/4 inch hose clamp. I found an installation video that allows you to come from the top down to replace this hose but for my model of washer and because the drier was stacked on top, I took apart the front of the washer since I learned from a different video how to do this in order to install the bellows. No more leaking at all with the new hose.
Read less
  • David from LIVONIA, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak
Removed top and front lower panels remove door panel.Remove ring from boot seal don’t damage seal.Replace hose,reassemble.Job is a lot easier if you purchase tool to re-install door ring seal.Tool is available from several sites on the net.
  • Robert from CHESWICK, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The hose from the detergent dispenser was dried out and cracked. Causing it to leak water during the different cycles.
I followed the video that accompanied the parts order confirmation. The replacement of the two parts, bellows and hose, were pretty straightforward. The job took a little less than an hour with little aggregation.
Other Parts Used:
Washer Dispenser Hose Bellow To Front Panel Clamp
  • Terence from FOUNTAIN, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leak in hose from soap dispenser to tub
Unplug machine from electrical outlet.
All screws can be removed with a 1/4" socket, either with a socket wrench or nut driver.
Top panel - remove three screws on back, slide panel back an inch or so, and lift off.
The control panel must be carefully pulled off by using a screwdriver to pry it away, and then placed on top of machine. Be careful not to disconnect or damage any attached wires.
Pull out the detergent dispense drawer, press the retainer on the left rear of dispenser drawer, and pull it out and set it aside. One small torx screw must removed from the dispenser housing.
Bottom front panel - remove three screws to take it off. This exposes the screws on the front panel.
The front panel of machine must be removed as well.
This is the most tedious part of the job, as the door seal must be disconnected from the panel. Remove the wire and spring retainer around the door that holds seal in place. The spring portion of the retainer is on the bottom of the opening. Pry it off with a screwdriver, being careful not to damage the rubber seal. Do not remove it, simply push it into the washer opening.
Remove the screws from the front panel - two on top, and two bottom. It has some wires on the right side, and to avoid damaging them, support the panel with a stool and prop it up against the machine.
You can now access the hose on the rear bottom of the dispenser. Using a pliers, squeeze the retainer and pull the hose off the dispense. The other end is pressed into the tub - simply pull it out. I recommend cleaning the edges of hole to assure a good seal when installing the replacement.
To install the replacement hose, press it into the tub, making sure to get the channel in the hose properly inserted in order to make a solid seal. Attach the other end to the dispenser with the retainer.
Reassemble by reversing the order described above.
Read less
  • Dennis from GREEN BAY, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine leaked.
Couldn’t see exactly where it was coming from. Checked the bellow and it looked ok. Took this hose off and it was kinda chewed up a bit where it connects to the tub. Not bad but enough to make it leak. Ordered the new one. Took forever to get here thru fed ex smart post. Repair takes longer to get the panels off than it does to put new hose on. Hope this helps someone out there.
Read less
  • Tyler from OGDEN, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Socket set, Wrench (Adjustable)
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12723930
Manufacturer Part Number: W11366227
Brand
Model Number
Description
Kenmore
11041932510
Washer - COMMERCIAL WASHER
Kenmore
11041942710
Washer - WASHER
Kenmore
11046462500
Washer
Kenmore
11046462501
Washer
Kenmore
11046472500
Washer
Kenmore
11046472501
Washer
Kenmore
11047511700
Washer
Kenmore
11047511701
Washer
Kenmore
11047511702
Washer
Kenmore
11047512600
Washer
Kenmore
11047512601
Washer
Kenmore
11047512602
Washer
Kenmore
11047512603
Washer
Kenmore
11047512604
Washer
Kenmore
11047512605
Washer
Kenmore
11047531700
Washer
Kenmore
11047531701
Washer
Kenmore
11047531702
Washer
Kenmore
11047532600
Washer
Kenmore
11047532601
Washer
Kenmore
11047532602
Washer
Kenmore
11047532603
Washer
Kenmore
11047532604
Washer
Kenmore
11047532605
Washer
Kenmore
11047542600
Washer
Kenmore
11047542601
Washer
Kenmore
11047542602
Washer
Kenmore
11047542603
Washer
Kenmore
11047542604
Washer
Kenmore
11047542605
Washer
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Washer Dispenser Hose
$ 28.66
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.