We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gina
March 26, 2020
Dryer started out continuing to tumble after door was opened. Now, we have to put pressure on the door at the bottom left of the door before we can start drying by pressing the start button. Does this sound like the door switch?
For model number GTD33EASK0WW
Hi Gina,
Thank you for your question. If you have to put pressure on the door at the bottom for the dryer to work, check and see if the door is aligned correctly. If it is not, then you may need to check the door strike and latch and you should check the hinge as well. If these parts check out fine, then the issue may be the door switch. You should also check the timer and the cycling thermostat as well. You will need to test the electronic parts with a multi-meter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. For more information on how to test these parts, click on the Appliance Repair link on our website and on the next page that comes up click on the dryer icon. When the next page comes up, you will be provided with a symptoms list. Choose the "Will not shut off" symptom and the information will come up for you. We hope this helps. Thank you and have a great day.
Hello Charlotte, Thank you for the question. If the dryer is not powering on (no lights ect) we suggest checking the Thermistor on the Blower Housing. With a Multimeter, The thermistor should read approximately 11.9K Ohms of resistance at 70 degrees Fahrenheit. We hope this helps!
Average Repair Rating: 4.4 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer would not start
I popped the door switch out with a small screwdriver, disconnected the electrical connection and re-connected the new switch and popped the new switch in place with a little adjustment.
Kenneth from COATESVILLE, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
WOULD NOT START/ stopped in the middle of cycle
Ordered parts and installed with YOUTUBE video. Model A little different than showed online, There was a Metal protector over the Door switch that need to be taken off before switch could be located. After detachment of dryer door, easily pushed the seal to one side to dislocate the metal protector. Would of took 30 minutes to complete if had not been for the Metal protector they added to cover the switch.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mike C - 6 days ago
Verified Purchase
Great part
Great part simple repair sorry i put up with it for so long.
★★★★★
★★★★★
Cindy W - March 2, 2023
Verified Purchase
Looks like a new dryer is on the way
It was not an expensive part. I gave it a try; it could have been the problem. But it was the motherboard.
★★★★★
★★★★★
Amanda W - September 8, 2021
Verified Purchase
Easy Repair!
I was hesitant about trying to fix the dryer myself, but considering the cost savings, figured it was worth a try. This was the easiest part to replace myself! It took barely 10 min and only because the old piece was jammed in there and I had to muscle it out. The new piece popped in easily with no problems and now the dryer works perfectly!! Thank you!!
★★★★★
★★★★★
Marcus S - August 4, 2020
Verified Purchase
It works!
part received in a timely manner and it was relatively easy to install. It is working fine!
★★★★★
★★★★★
Lisa N - May 29, 2020
Verified Purchase
Easy repair
It was so easy to order, delivery was quicker than expected. It was really easy to repair. I was very satisfied with service from here
★★★★★
★★★★★
Thomas B - November 7, 2019
Verified Purchase
all as advertised
the part was the correct one and worked like a champ
★★★★★
★★★★★
Wallace M - September 7, 2019
Verified Purchase
Great part fixed issue
Part was easy to install
★★★★★
★★★★★
Ronald L - September 5, 2019
Verified Purchase
Worked great
Our dryer working great
★★★★★
★★★★★
Pamela I - August 6, 2019
Verified Purchase
Easy repair dryer door switch.
Was the exact part that I needed. It was an easy repair. Arrived fast. If needed would order from this company again! Thank you.
★★★★★
★★★★★
Quentin T - July 15, 2019
Verified Purchase
works perfect
Part was the right type. My dryer is working back as new.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
