GE/GE_Thumb/00140005i01.gif
See part 1006 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

LATCH DOOR

★★★★★
★★★★★
7 Reviews

Rated by 1 customers 

A Bit Difficult

15 - 30 mins

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS12709833
Manufacturer Part Number WB02X32764
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB02X32764 replaces these:
WB06X10841
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 1 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    microwave fan will not shut off when door is closed.
    Slide thin blade between black plastic cover and microwave door frame and pry up gently to release snap in tabs for the top. They are about 8 inches from each side of the door lengthwise. Same for bottom, except pry down. Next pry outward at each end with blade between the black plastic frame and door frame to release snap in tabs. Doing this may take a bit of jiggle work and be gentle, this frame is fragile. Next there are 5 small phillips screws behind this frame to be removed. 2 bottom 2 top and 1 by door handle. When screws are loosened keep phillips driver holding the screw in, then cup your hand under each screw and catch them when removing them to prevent screws hitting the floor and bouncing to lostville. Next use the thin blade to pry door outer shell from door frame partially. Insert blade between metal frame and plastic shell of door approx. 4 inches from end lengthwise and pry up to release snap in tabs. Repeat for bottom except pry down. The door may separate at handle end now; if not insert blade vertically at handle end about 3 inches from top between metal frame and plastic door shell and pry out and again about 3 inches lower. Use fingers to pry handle end of door apart far enough to see the spring holding the latch. Use fingers or small needlenose pliars to undo spring then slide up plastic latch and remove. Place old spring onto hook in the middle of the new latch, position new latch with latch arms with circles pointing downward back onto metal frame with upper and lower latch guides hooking into metal frame. Push latch down and reconnect spring to metal hook in door frame. Slide new latch up and down a little bit to ensure proper operation. Next squeeze metal frame and outer door shell together until you hear the snap ins snap close. Next put a small bit of wax on end of phillips driver to hold the small screws and reinstall them. Next insert the end of the black plastic frame towards the hinges first into the door then rest the black plastic frame lightly against the microwave door. Press against the top back corner about 4 inches from the hinges and squeeze together the door and the frame. It will make snap sound then repeat for bottom corner. Next squeeze together about 4 inches from handle end at top then bottom to hear snap sound. Finally squeeze the vertical part together behind the handle and make sure black plastic frame is flush with metal door frame and you are done. Again these parts are fragile so take your time.
    • Dan from FORT WAYNE, IN
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    3 of 3 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      7 Reviews
      5.0
      Filter By Rating:
      • 5 Stars
        7
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS12709833
          Manufacturer Part Number: WB02X32764
          Brand
          Model Number
          Description
          General Electric
          CVM1750SH1SS
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          CVM1750SH2SS
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          PSA9120DF1BB
          Microwave
          General Electric
          PSA9120DF1WW
          Microwave
          General Electric
          PSA9120SF1SS
          Microwave
          General Electric
          PSA9120SF2SS
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          PSA9120SF3SS
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          PSA9120SF4SS
          Range
          General Electric
          PSA9120SF5SS
          Microwave Oven Combo
          General Electric
          PSA9120SF6SS
          Microwave Oven Combo
          General Electric
          PSA9240DF1BB
          Microwave
          General Electric
          PSA9240DF1WW
          Microwave
          General Electric
          PSA9240SF1SS
          Microwave
          General Electric
          PSA9240SF2SS
          Microwave - MICROWAVE
          General Electric
          PSA9240SF3SS
          Microwave - MICROWAVE/HOOD COMBO
          General Electric
          PSA9240SF4SS
          General Electric
          PSA9240SF5SS
          Microwave Oven Combo
          General Electric
          PSA9240SF6SS
          Microwave Oven Combo

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service