12709833-1-M-GE-WB02X32764-LATCH DOOR
Part Location Diagram of WB02X32764 GE LATCH DOOR
See part 1006 in the diagram
12709833-1-S-GE-WB02X32764-LATCH DOOR 360 view
( Grid squares measure 1x1 inch )
12709833-1-S-GE-WB02X32764-LATCH DOOR 12709833-2-S-GE-WB02X32764-LATCH DOOR 12709833-1-S-GE-WB02X32764-LATCH DOOR 360 view
Part Location Diagram of WB02X32764 GE LATCH DOOR
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

LATCH DOOR WB02X32764

★★★★★
★★★★★
8 Reviews

Rated by 1 customer 

A Bit Difficult 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 8.06
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS12709833
Manufacturer Part Number WB02X32764
Manufactured by GE
Troubleshooting
This part fixes the following symptoms:
Door not closing properly
This part works with the following products:
Microwave.
This part works with the following products:
General Electric.
Part# WB02X32764 replaces these:
WB06X10841
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
5.0
Filter By Rating:
  • 5 Stars
    8
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas M M - April 23, 2023
  Verified Purchase
Great part, but challenging to replace.
The part came on time and seems better than original (quieter and smoother) but the spring you need to attach with it is a pain in the neck to reach (behind the actual latch), and lock in place. Took a lot of persistence and a very skinny screwdriver to finally wriggle it in there. All told though, well worth it. Been in place for nearly a month now and the new latch works great!
★★★★★
★★★★★
David S - January 28, 2020
  Verified Purchase
PART FIT AND ALL IS WORKING AFTER IT WAS INSTALLED!
The hardest part was getting the door frame apart. I found great instructions on the internet on how to get the front and back of the door separated. Problem manifest itself by no rotation of the glass platter or heating. The door latch broke internally in the door.
★★★★★
★★★★★
Brandi P - August 15, 2019
  Verified Purchase
Fast Delivery; Worked Well
We were able to get the part we needed to replace and it arrived fast. Very happy.
★★★★★
★★★★★
Sue H - April 10, 2019
  Verified Purchase
GE Advantium door latch
The door latch arrived quickly and my husband was able to replace it, so everything is in working order again!
★★★★★
★★★★★
Dan J - January 10, 2019
  Verified Purchase
Microwave door latch
New o.e.m. part in sealed bag. Quick shipping. Successful repair. Thank you.
★★★★★
★★★★★
KIM G - November 28, 2018
  Verified Purchase
Door latch worked great
Correct part. My husband installed latch in the door after watching a couple you tubes. For works great again.
★★★★★
★★★★★
Jack R - September 21, 2018
  Verified Purchase
Microwave repair
Correct part quickly came. I watched 4 u-tubes to figure out how to install. Minimum of tools needed. $5 part saved me $600 for over the oven new microwave.
★★★★★
★★★★★
R A - August 17, 2018
  Verified Purchase
Microwave latch
Easy to install. Glad I attempted in replacement instead of calling repairman.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
microwave fan will not shut off when door is closed.
Slide thin blade between black plastic cover and microwave door frame and pry up gently to release snap in tabs for the top. They are about 8 inches from each side of the door lengthwise. Same for bottom, except pry down. Next pry outward at each end with blade between the black plastic frame and door frame to release snap in tabs. Doing this may take a bit of jiggle work and be gentle, this frame is fragile. Next there are 5 small phillips screws behind this frame to be removed. 2 bottom 2 top and 1 by door handle. When screws are loosened keep phillips driver holding the screw in, then cup your hand under each screw and catch them when removing them to prevent screws hitting the floor and bouncing to lostville. Next use the thin blade to pry door outer shell from door frame partially. Insert blade between metal frame and plastic shell of door approx. 4 inches from end lengthwise and pry up to release snap in tabs. Repeat for bottom except pry down. The door may separate at handle end now; if not insert blade vertically at handle end about 3 inches from top between metal frame and plastic door shell and pry out and again about 3 inches lower. Use fingers to pry handle end of door apart far enough to see the spring holding the latch. Use fingers or small needlenose pliars to undo spring then slide up plastic latch and remove. Place old spring onto hook in the middle of the new latch, position new latch with latch arms with circles pointing downward back onto metal frame with upper and lower latch guides hooking into metal frame. Push latch down and reconnect spring to metal hook in door frame. Slide new latch up and down a little bit to ensure proper operation. Next squeeze metal frame and outer door shell together until you hear the snap ins snap close. Next put a small bit of wax on end of phillips driver to hold the small screws and reinstall them. Next insert the end of the black plastic frame towards the hinges first into the door then rest the black plastic frame lightly against the microwave door. Press against the top back corner about 4 inches from the hinges and squeeze together the door and the frame. It will make snap sound then repeat for bottom corner. Next squeeze together about 4 inches from handle end at top then bottom to hear snap sound. Finally squeeze the vertical part together behind the handle and make sure black plastic frame is flush with metal door frame and you are done. Again these parts are fragile so take your time.
Read less
  • Dan from FORT WAYNE, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
SPRING LATCH DOOR
$8.06
$8.06
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12709833
Manufacturer Part Number: WB02X32764
Brand
Model Number
Description
General Electric
CVM1750SH1SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
CVM1750SH2SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
PSA9120DF1BB
Microwave
General Electric
PSA9120DF1WW
Microwave
General Electric
PSA9120SF1SS
Microwave
General Electric
PSA9120SF2SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
PSA9120SF3SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
PSA9120SF4SS
Range
General Electric
PSA9120SF5SS
Microwave Oven Combo
General Electric
PSA9120SF6SS
Microwave Oven Combo
General Electric
PSA9120SP1SS
Microwave - Microwave/Hood Combo
General Electric
PSA9240DF1BB
Microwave
General Electric
PSA9240DF1WW
Microwave
General Electric
PSA9240SF1SS
Microwave
General Electric
PSA9240SF2SS
Microwave - MICROWAVE
General Electric
PSA9240SF3SS
Microwave - MICROWAVE/HOOD COMBO
General Electric
PSA9240SF4SS
General Electric
PSA9240SF5SS
Microwave Oven Combo
General Electric
PSA9240SF6SS
Microwave Oven Combo
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
LATCH DOOR
$ 8.06
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.