Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Courtney
May 25, 2022
Dishwasher has no power, turned the breaker off, then back on, everything lights up like dishwasher is working but when touching the touchpad the dishwasher does nothing. After a few seconds everything goes black again!
For model number FGID2466QF7A
Hi Courtney,
Thank you for your question. If your dishwasher will not start, there are some parts that you will need to check to see which one is causing the issue. You will need to check the latch assembly, the blower vent assembly, the dishwasher switch assembly and the electronic control board. We have included a link that you may reference on how to check these parts and some others as well. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Does switch assembly PS12585690 come with the console assembly PS1271749?
For model number FGIP2468UF0A
Hello Steven, thank you for reaching out. The Switch assembly does not come with the console assembly, you will need to order it separately. The part number is PS12585690. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sue
February 17, 2022
I have an er code and think buttons are stuck. Is this the buttons and power attachment?
For model number FGID2466QB7A
Hello Sue, thank you for your question. The code indicates the Main Control Board has detected a stuck key or a key pressed for more than one minute. To remedy this, check connection from keypad to Main Control Board. If correct, replace keypad. If error still exist, replace Main Control Board. . Good luck and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rickey
November 30, 2022
When I select Top Rack it shows 70 minutes but when I hit the start button it changes to 109 minutes. The 109 minutes is for the Energy Saver.
For model number FGIP2468UFOA
Hello Rickey, thank you for reaching out. If the keypad is not working properly, it indicates that the dishwasher switch assembly, part number PS12585690, is malfunctioning and needs to be replaced. If this does not help, we recommend that you check the control board, part number PS12585693. If you require assistance to place an order, please contact customer service. We hope that helps!
Will this fix the Er error code? Basically my start button has been going for awhile & now it won’t start at all. I tried holding the button to reset- no go and I also tried turning power off for 20 mins & the error comes back. Please assist
For model number FGID2466QF7A
Hello Amanda, thank you for the great question. According to our research, this error code indicates that there is an issue with the touchpad. The part that you mentioned is the user interface assembly. We recommend you replace this user interface assembly, part number PS12585690, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
