Light Socket W11281687
Fits your YMET8720DS03!
★★★★★
★★★★★
Rated by 4 customers
Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
$
36.78
Special Order
Get FREE EconoShip on orders over $100! T&C apply
Fits your YMET8720DS03!
PartSelect Number PS12584564
Manufacturer Part Number W11281687
Manufactured by
Whirlpool
Product Description
Light Socket Specifications
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the back of your range, so in order to access it you will need to remove the back panel. Many of our customers have rated this repair as easy, and it should take less than 15 minutes. Before you begin this repair, make sure to disconnect the power source from your range. This is an OEM part sourced directly from the manufacturer. This is the Light socket assembly with lens. Bulb not available separately from this housing.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Range Light Socket
Back to Top
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag.
Part# W11281687 replaces these:
AP6800003
Customer Reviews
Average Rating:
9 Reviews
★★★★★
★★★★★
4.7
Filter By Rating:
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
James F - January 9, 2023
Verified Purchase
Fast service, easy installation
I was very pleased with the service I received, a rep actually reached out to be sure they had the part # I needed. I asked them twice to send me warranty information and have had no response, that was the only negative thing I experienced
★★★★★
★★★★★
EARL H - February 18, 2022
Verified Purchase
Easy repair
The part was easy to install, fast shipping and is working well. Will buy again from this company again if needed. Thanks
★★★★★
★★★★★
Bruce M - September 17, 2021
Verified Purchase
sent as required
Received the part for our old oven and all went perfectly. Not sure what I would do without the availability of PartSelect. Great service and fast mailing time
★★★★★
★★★★★
Rex W - September 1, 2021
Verified Purchase
Put the light in, worked great!
I received the part, installed it, worked great. Stove light works again!
★★★★★
★★★★★
Linda P - December 30, 2020
Verified Purchase
Oven light socket relacement
Once we got the old socket out the new one was a snap to put in. Fit perfect. Was so glad it only took a few days to receive the new part.
★★★★★
★★★★★
Susan G - August 26, 2020
Verified Purchase
28 year old oven saved! Light and oven works great!
We had hired a local appliance repair company to fix the oven light on our oven built in 1992. They said they couldn't do it, because they couldn't get the part. They charged me $109 for the service call, even though I'd given them the model and serial number ahead of time. I was so mad!
PartsSelect had the part! It came quickly and it perfect condition. My husband pulled the oven out of the wall where it's mounted, replaced the oven light, and now it works perfectly!
This saved us from wanting to replace our 28 year old oven, which would have cost us hundreds of dollars!
★★★★★
★★★★★
William W - May 20, 2020
Verified Purchase
Light Socket
light works better than the old did by being LED. Very happy with purchase.
★★★★★
★★★★★
Sheryl N - March 26, 2019
Verified Purchase
Easy repair. Works well.
Did the trick. We now have light in the oven.
★★★★★
★★★★★
Edward H - February 14, 2019
Verified Purchase
Great part but difficult to install.
Any information on how to replace this part was misleading. Supposedly you have to pull the oven out, remove the back panel, and use a screwdriver to pry the old part out. Actually all you have to do is remove the old cover and bulb, twist the part out with a pliers, connect the new part to the wires, and pop the socket back in. This only takes about 5 minutes to do.
- < Prev
- 1
- Next >
Back to Top
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 4 reviews.
What's this?
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven light kept burning out instantly
Replaced the oven light with a new one but it burnt out as soon as I turned it on. Therefore I decided a new socket may help.
My whirlpool apparently has the old style socket which is pictured in partselect part #PS12584564. The old style socket has to two metal arms that retain it against the metal reflector.
The ... Read more part that will come (#PS12584564) however is the new style that whirlpool has changed to, apparently. It is not as pictured. The socket and the reflector have different retention devices.
I used screw drivers to bend the two metal arms away to release the socket. Then I had to use allen wrenches to bend the reflector's retention tabs away.
Once I had the old socket, reflector, and lens replaced I just followed the video on partselect for part #PS12584564
My whirlpool apparently has the old style socket which is pictured in partselect part #PS12584564. The old style socket has to two metal arms that retain it against the metal reflector.
The ... Read more part that will come (#PS12584564) however is the new style that whirlpool has changed to, apparently. It is not as pictured. The socket and the reflector have different retention devices.
I used screw drivers to bend the two metal arms away to release the socket. Then I had to use allen wrenches to bend the reflector's retention tabs away.
Once I had the old socket, reflector, and lens replaced I just followed the video on partselect for part #PS12584564
Read less
-
David from ENID, OK
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing oven light and socket
The old part, including lightbulb and socket, had corroded into place, and the glass light cover was stuck to the socket. I used a dead blow hammer and a dowel just under the diameter of the hole to tap on the back side of the socket to loosen it and get it out. The metal tabs on the old socket were folded back to make it fit better (?),
... Read more
which made it harder to remove. Lots of muscling of the part to get it out. Easy to install new part once old one was out of the way. An experienced person would have removed the old part and installed the new in no time.
Read less
-
Carol from BELLINGHAM, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven lamp socket had broken center electric tab - failed.
1993 model oven, built in wall model, so didn't to remove oven for the normal rear access to replace the lamp socket. As someone else posted, replacement can be done from inside the oven -- BUT the socket removal was more complex than just 'twisting it out.' But below worked! (1) Turned off oven power at circuit breaker panel. To facilit
... Read more
ate working in the oven compartment, removed oven door (2 screws on back of door), raised the over door almost closed, put 2 large nails through the hinge holes when they lined up. Lifted the door out (heavy ~20-25 lbs) and put aside. (2) Put work light inside oven. (3) unscrew glass socket lens and the bulb). (3) Using inspection mirror, studied the inside of the socket to determine that its lock tab type and locations -> were on left and right sides of the socket. These tabs needed to be bent in, but they were each held out by a small circumferential length of think metal, a tab about 3/16" x 3/8". These small tabs could be moved/positioned by just finger friction, with a little start with a screwdriver tip on their edge! I got an end positioned to put sharp screwdriver under that end, then pried it (bent it) inward a short distance. Enough to use needle-nosed pliers to pull it completely out - came fairly easily. Repeated on other side of socket. (4) Then, with pliers, bent each of the 4 locking tabs inward a short distance, Used sharp tool to get one socket edge lifted a small amount; then use mini-pry bar and screwdriver to gently pry around the socket in steps, working evenly around its edge. At about 3/8", it was free. Lifted it inward gently so as not to damage the insulation of the 2 wires attached to its rear. Noted the direction of the wire tabs was straight up (keep same orientation on new socket). (5) Needle-nosed pliers on each connector to gently work the connectors off their socket tabs. Note one tab is larger than the other. Keep the wires inside the oven compartment. Don't damage the insulation. (6) Pushed the wire connectors onto their respective new socket tabs. Aligned socket with the tabs upward, and inserted it, careful to nurse the wires back into the oven wall hole; press socket into the hole, pushing it in evenly and firmly until flush. (7) Pushed in the new type bulb that came with new Socket. Turned on power, and light came on. (8) screwed on new glass cover. (9) Lifted oven back onto the hinge prongs. (easier with two people to get the prongs aligned and into their door slots.) Worked door left and right to get it to lower down fully. Removed nails, lowered door, and put its 2 screws back on. (10) Poured a glass of wine.
Read less
-
Stan from FLAT ROCK, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light would not light
Pop old one out and new one in
-
Frank from LEBANON, VA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Back to Top
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary Harklerode
December 27, 2021
Oven light socket. I don’t need the entire socket. All I need is the glass light cover. Ours is cracked. Is there a way to purchase just the cover?
For model number WFE505W0HW0
Hello Gary, Thank you for your inquiry. We have researched your model and the light cover only comes with the light socket assembly. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Back to Top
You May Also Need
?
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12584564
Manufacturer Part Number: W11281687
Manufacturer Part Number: W11281687
Brand
Model Number
Description
Back to Top
Light Socket
$
36.78
Special Order
✖
Stock Status
In Stock
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.