Part Location Diagram of AJU75152601 LG Washer Water Inlet Valve
See part A180 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Washer Water Inlet Valve AJU75152601

 Fits your WT1101CW!
★★★★★
★★★★★
39 Reviews

Rated by 5 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 126.23
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your WT1101CW!
PartSelect Number PS12374721
Manufacturer Part Number AJU75152601
Manufactured by LG
Product Description

Washer Water Inlet Valve Specifications

This is an authentic LG water inlet valve for a top-load washer. It is designed to control the flow of water into the washer. If your washer is filling slowly, making loud noises, overflowing, or stopping in the middle of a cycle, you may need to replace the water inlet valve. Be sure to disconnect the power and water supply before you begin this repair.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking | No hot or cold water
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG.
Part# AJU75152601 replaces these:
AP6308239, AGF76283896, AJU73213301, AJU75152603
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
39 Reviews
4.7
Filter By Rating:
  • 5 Stars
    34
  • 4 Stars
    2
  • 3 Stars
    1
  • 2 Stars
    1
  • 1 Star
    1
Sort by:
  • 1
  • 2
  • 3
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.1 / 5.0, 5 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Low water flow into washer
Replaced valve body, very easy to fix as per the video, runs normal.
  • Alexander from SALISBURY MLS, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was slowing filling with water when turned off.
The problem was the valve suppling water to the bleach dispenser was not closing completely. This also caused some water leaking towards
the front of the washer. Replacing the entire valve assembly was very
easy. Unplug the washer, turn off the water, remove the 2 screws that attach the control panel, disconnect the water supplies, unplug the 5 solenoids, remove the hose clamps from the 2 hoses, remove the 3
screws that attach the valve assembly and remove it. Reassemble in reverse order, I did find that applying some water based personal lubricant to the 3 high pressure seals made assembly much easier.
  • Michael from La Honda, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
4 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Hot water valve did not shut off ever
After getting the model info from the back of the washer control panel, I searched Partselect for the water valve part. Easy process, It was here in 2 days. Unplug the machine, I took 2 screws out of the back of the control console and tipped it forward to reveal the valve assy. Turn off the water at the wall and disconnect the hot and cold lines from the washer . I removed the 3 screws holding the valve assy to the deck and with pliers disconnected the 2 clamped rubber lines and then with just finger pressure wiggled the valve from the remaining pipe connections. I swapped the 5 wire connectors to the new valve and wiggled it back into place. Clamped the 2 rubber lines again. and then connected the water inlet hoses to the new valve. Closed it up and called the laundry lady ( sorry honey) 30 minutes to Household harmony again!!
  • Scott from SANTA CLARITA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water overflow in washer basin
I diagnosed by running a full wash. I watched it and when the water should have stopped it kept running. I unplugged the washer from the power and the water kept running. This told me the inlet valve was the issue and not an electronic issue. I stopped the water by closing the water valve manually. Replacing the inlet valve was very easy. Hardest part is moving the washer out of the laundry room. The videos online show very simple steps. Maybe 8 screws to remove and a couple of hoses and five electronic connectors. Take a photo of connectors before removing them to ensure you reconnect properly.
  • Ed from LAKE WORTH, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water continued leaking into washer after the end of cycle through the water inlet valve.
Did the repair Myself. Saved $ 400.00 in the process.
  • Flora from MIAMI, FL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

9 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
November 27, 2018
Hello, I have a slow leak (water) when not in service, is this the part I need? Thanks!
For model number wt5070cw
PartSelect logo
Hello Mark, Thank you for the question. This sounds like a defective valve. They can become "Stuck: open and allow water to flow through. Hope this helps, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Uwe
December 19, 2018
Water tube in washer only fills with cold water on hot setting.
For model number WT5070CW
PartSelect logo
Hi Uwe, thank you for your question. Most of the time when you are having that issue, it means that there is a problem with your water inlet valve. I could suggest testing the part with a multi meter to be sure. Each solenoid on the valve should be reading somewhere between 500 - 1500 ohms to be working. I hope that helps. Good luck with your repair.

3 people found this helpful.

Was this helpful?
Thank you for voting!
RICHARD
February 12, 2023
THE WASHER MAKES A SQUEALING NOISE WHEN WATER IS ENTERING THE MACHINE, WHETHER AT START UP OR DURING RINSE CYCLES. WILL THIS BE CORRECTED BY REPLACING THE INLET VALVE?
For model number LG WT5001C
PartSelect logo
Hi Richard, thank you for your question. The issue is probably related to the water inlet valve, part number PS12374721. It controls the water flow into the washer. We hope this information helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jay
August 22, 2019
Will this assembly take care of my issue: Regardless of the choice or setting i chose, if the wash selected requires water from the “hot water” inlet i get hot water only and never cold water no matter what setting. No blockage of cold water supply in any way, valve does not let cold to flow into washer.
For model number 79629002000
PartSelect logo
Hello Jay, thank you for writing. This could be due to a clogged or damaged Cold Inlet Hose, part number PS3635975 for your model. You may also want to consider this Inlet Valve Assembly part number PS12374721 as the cause. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Doug
October 19, 2022
Water won’t shut off only allows hot water in and no cold
For model number WT5270CW
PartSelect logo
Hi Doug, thank you for your question. Replacing the water inlet valve, part number PS12374721, will most probably solve your problem. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kevin
December 19, 2022
Getting code: IE. can you tell me what part I would need to order and replace? Thanks.
For model number 31552
PartSelect logo
Hello Kevin, thank you for the great question. An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines is frozen. Once the temperature increases above freezing, the water supply will resume. We recommend reinstalling the drain hose correctly, making sure the hot and cold water taps are open fully, making sure the drain hose is not kinked or damaged, and checking the inlet filter or water inlet valve for any mineral deposits or other debris that may be clogging. If it does not help, you will need to replace the water inlet valve, part number PS12374721, or the pressure switch, part number PS3526607. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jack
December 27, 2022
I want to get two mesh filters that fit into the plastic "Basket" fittings that are inserted into the HOT & COLD water intake connections. Can you provide them or provide contact information to someone who can?
For model number WT7200CW
PartSelect logo
Hello Jack, Thank you for the question. The Mesh Filters are not sold separate from the Water Inlet Valve. The Valve would need to be replaced. We hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Anne
March 24, 2023
I replaced the main control board on my LG top load washer and the cold water is still not flowing in, only extremely hot water. What iadditional part would be required to replace the water intake valve?
For model number WT1101CW
PartSelect logo
Hello Anne, thank you for contacting us. We would recommend checking that the pressure of the main water supply is within the operational limits. If the pressure is fine, then you may need to check the water inlet valve, part number PS12374721. We also recommend checking the wire connection of the water inlet valve. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Fred
January 28, 2019
No hot water when filling only cold thanks
For model number wt4970cw
PartSelect logo
Hello Fred, Thank you for contacting us. It is possible that the solenoid for the hot water portion of the valve is not opening. You can test the water valve with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Below is a link to our how-to video for using a multimeter. I hope this helps! Have a wonderful day and good luck with your repair! https://www.youtube.com/watch?v=bWC44fHn0As

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12374721
Manufacturer Part Number: AJU75152601
Brand
Model Number
Description
LG
25667
Washer Dryer Combo - Washer-Dryer
LG
31433
Washer Dryer Combo - Washer-Dryer
LG
31512
Washer Dryer Combo - Washer-Dryer
LG
31513
Washer - Washer
LG
31522
Washer Dryer Combo - Washer-Dryer
LG
31552
Washer Dryer Combo - Washer-Dryer
LG
31553
Washer - Washer
LG
31622
Washer Dryer Combo - Washer-Dryer
LG
31623
Washer - Washer
LG
35563
Washer Dryer Combo - Washer-Dryer
LG
42652115
Washer Dryer Combo - Washer-Dryer
LG
LGWT7200CW
Washer Dryer Combo - Washer-Dryer
LG
LGWT7700HVA
Washer Dryer Combo - Washer-Dryer
LG
WT1101CW
Washer - Washer
LG
WT1201CV
Washer - 4.3 Cu. Ft. Ultra Large Capacity Top Load Washer With Front
LG
WT1201CW
Washer - 4.3 Cu. Ft. Ultra Large Capacity Top Load Washer With Front
LG
WT1501CW
Washer - Lg Wt1501cw Top Loading Washer 4.5 Cu Ft White
LG
WT1701CV
Washer - Lg Wt1701cv/00
LG
WT1701CW
Washer
LG
WT1801HVA
Washer - 4.9 Cu. Ft. Mega Capacity Front Control Turbowash
LG
WT1801HWA
Washer
LG
WT1901CK
Washer - 5.0 Cu. Ft. Large Smart Wi-Fi Enabled Top Load Washer
LG
WT1901CW
Washer - 4.5 Cu. Ft. 9-Cycle Top-Loading Washer
LG
WT4870CW
Washer
LG
WT4901CW
Washer
LG
WT4970CW
Washer - WASHER
LG
WT5070CV
Washer - Washer
LG
WT5070CW
Washer
LG
WT5075CW
Washer - Washer
LG
WT5170HV
Washer
Customer Service Representative

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service