Whirlpool/Whirlpool_Thumb/6B3086E80D4CB8ADC46C6E0C0CEB4E717455D897.gif
See part 15 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Water Inlet Valve

★★★★★
★★★★★
28 Reviews
$56.98   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12349267
Manufacturer Part Number W11210459
Manufactured by Whirlpool
Product Description

Water Inlet Valve Specifications

This water inlet valve is for washers. The water inlet valve controls the water flow into the washer. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not fill with water | Leaking | Will not stop filling with water | No hot or cold water
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, Crosley.
Part# W11210459 replaces these:
AP6329217, W10701459, W10838319, W10869799, W11025984, W11038711, W11210459VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

19 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
November 5, 2019
Hot water fills, but cold water runs about 10 seconds and stops the. The washer will try to start washing.
For model number RTW4516FW1
Hi Gary, Thank you for your question. If the washer is not filling with cold water, you should check the water inlet valve to see if it is working correctly. The valve should be found directly behind the hose connections. Looking for signs of damage, cracking, or wear, visually inspect your washer’s valve. The valve has screens inside it that may have built up dirt or debris, if so, it should be carefully cleaned as if these screens become damaged, you will need to replace the entire valve. The resistance of a properly functioning valve varies from model to model, refer to your owner’s manual to determine what the reading of your test should be. To test for continuity, place the probes onto the valve’s terminals with your multi-meter set to Rx1. If you do not receive a reading that indicates continuity, you will need a replacement water inlet valve. I would check the door lock as well. If this part is not working correctly, this will cause issues throughout the washer. Here is a link from our website on some other parts that you will need to check to see what may be causing the issue, https://www.partselect.com/Repair/Washer/No-Hot-Cold-Water/#Water%20Inlet%20Valve. I hope this helps. Thank you and have a great day!

16 people found this helpful.

Was this helpful?
Thank you for voting!
Martin
February 1, 2019
I am replacing the water inlet valve part # w10869799. How do i get the old one off
For model number WTW5000DW1
Hello Martin, Thank you for the question. Here is a link to a video that may help. The appliance mat not be %100 the same but should have the same basic steps. Hope this helps! https://www.youtube.com/watch?v=hjiKQ9Ye58Q&t=3s

5 people found this helpful.

Was this helpful?
Thank you for voting!
Billie
July 16, 2019
Is it possible too buy the 2 little strainers that go inside of the water inlets
For model number Ntw4516fw0
Hello Billie, thank you for writing. Unfortunately they are only sold on this replacement Water Inlet Valve part PS12349267 for your model.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Lisa
December 19, 2019
When i wash in cold water it starts off filling with cold then stops and fill with hot.
For model number mvwc555d01
Hi Lisa, thank you for your question. The part to check first would be your water inlet valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. If that part is fine then the issue might actually be in your control board. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Michael
August 6, 2019
The washing machine gets no hot water. Water supply and hoses/ screens good. Cold water comes in but no hot water. Could it be the fill valve?
For model number WTW4616FWO
Hello Michael, thank you for your question. Yes, the if the hoses and water supply were checked but the unit doesn't get hot water, the water inlet valve would have to be replaced. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Austin
December 7, 2019
My top load washer has a slow leak coming from where the water fills the tub.Then the washer kicks on and drains itself. What could be the problem???
For model number Wtw5000dw1
Hi Austin, I was thinking a faulty inlet valve as well. It is probably your best bet to fix this symptom. Thank you for your question and good luck with your repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Patricia
November 4, 2019
Do these washers ever get clogged and if so, how would one go about unclogging them?
For model number WTW5000DW1
Hi Patricia, Thank you for your question. Certain washer parts may become clogged overtime through use. The drain pump may become clogged with gunk preventing the water from draining. You will need to remove and inspect the pump to verify if it is clogged. If it is you will need to either clean it or replace it. Check the hoses as well for any clogs and clean or replace them if necessary. If the detergent dispenser becomes clogged with detergent, try using distilled white vinegar to clean it. Pour it into the dispenser and run the washing machine on a regular cycle. The vinegar should remove clogs and any residue. Make sure you clean the detergent drawer every month. If the screens in the water inlet valve become calcified, you can try soaking the screens in a solution of vinegar. If they just have dust and grit on them, you can try brushing this off. This may work. The screens on a water inlet valve are fragile and can become damaged. If these methods do not help to clean them, you may need to replace the water inlet valve. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Larry
August 6, 2019
Water will not shut off keeps running and floods the floor until turned off
For model number ntw4705ew0
Hello Larry, thank you for your question. If the water continues to flow when the plug is removed from the wall the water valve would need to be replaced. If it shuts off when the unit is unplugged the issue could be the valve, or water level pressure switch. I hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Sue
September 19, 2019
Is there a replacement screen for the water inlet valve. If not, is there a screen that would go on the hose faucet end? We have well water and it clogs screen.
For model number Whirlpool washer WTW4815EW1
Hello Sue, Thank you for the question. Sadly, we could not find the requested parts. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Tim
October 1, 2019
This washer won't fill with hot water it starts to but then mixes hot and cold i would like hot water is there a fix or adjustment to make.
For model number WTW 4846FWO
Hello Tim, thank you for writing. This sounds like a faulty Water Inlet Valve, this part number PS12349267 for your model. You may also want to consider the Water Temperature Switch, part number PS11752018. Good luck with your repair!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 4 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    Water would not fill the washer except for 4 inches.
    Once we put in the new Water Inlet Valve, the auto sensor works now and I can wash any size load
    • Patricia from MURPHYSBORO, IL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Nutdriver, Screw drivers
    17 of 25 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    No cold water
    Cold and hot water valve .easy as pie.
    • Greg from HAVELOCK, IA
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Nutdriver, Pliers
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    replace water inlet value
    had to change out wiring harness was not compatible
    • Norbert from PITTSBURGH, PA
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Pliers, Screw drivers
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    washer not filling with enough water
    see you tube on how too
    • Jon from LAS VEGAS, NV
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      15 - 30 mins
    • Tools:
      Screw drivers
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      28 Reviews
      4.8
      Filter By Rating:
      • 5 Stars
        25
      • 4 Stars
        2
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12349267
      Manufacturer Part Number: W11210459
      Brand
      Model Number
      Description
      Kenmore
      11020222510
      Washer - WASHER
      Kenmore
      11020232710
      Washer - WASHER
      Kenmore
      11020232711
      Washer - Washer
      Kenmore
      11020242510
      Washer - WASHER
      Kenmore
      11020362811
      Washer - Washer
      Kenmore
      11022242511
      Washer - Washer
      Kenmore
      11022342512
      Washer - WASHER
      Kenmore
      11022352510
      Washer - WASHER
      Kenmore
      11022352511
      Washer - Washer
      Kenmore
      11022442511
      Washer - WASHER
      Kenmore
      11022442512
      Washer - WASHER
      Kenmore
      11022532510
      Washer - WASHER
      Kenmore
      11022532512
      Washer - Washer
      Kenmore
      11025122810
      Washer - Washer
      Kenmore
      11025132411
      Washer - WASHER
      Kenmore
      1105142511
      Washer - WASHER
      Kenmore
      1105142512
      Washer - Washer
      Crosley
      CAW11544EW1
      Washer - WASHER
      Crosley
      CAW35114GW0
      Washer - WASHER
      Whirlpool
      CAW35114GW1
      Crosley
      CAW42114GW0
      Washer - WASHER
      Whirlpool
      CAW42114GW1
      Crosley
      CAW8350EW0
      Washer - WASHER
      Crosley
      CAW8350EW1
      Washer - WASHER
      Crosley
      CAW9352EW1
      Washer - WASHER
      Inglis
      ITW4771EW0
      Washer - WASHER
      Inglis
      ITW4871FW0
      Washer - WASHER
      Inglis
      ITW4871FW1
      Washer - RESIDENTIAL
      Whirlpool
      ITW4871FW2
      Whirlpool
      ITW4880HW0
      Washer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service