This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to replace the door seal if you are experiencing leaking from the front of your dishwasher. Once you have removed your old seal, we recommend inspecting the groove to make sure there are no food particles or debris caught inside that will impede the installation process.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jim A - November 6, 2022
Verified Purchase
Easy repair and great part
A had several leaks and the door gasket was the source of one of them. The replacement took less than 10 minutes to perform. It was a perfect fit!
★★★★★
★★★★★
John G - April 24, 2022
Verified Purchase
Exact Fit
Part came on time, easy install instructions on website and works great! No leaks!
★★★★★
★★★★★
Calvin P - December 5, 2021
Verified Purchase
great part
Dishwasher door gasket received. It fit perfectly and the door no longer leaks.
Thank you.
★★★★★
★★★★★
Rosemary K - September 26, 2021
Verified Purchase
easy repair tight to close door but works fine.
price dropped over $20 after receiving it.Still cheaper than a new washer.
★★★★★
★★★★★
Laura J - August 18, 2021
Verified Purchase
Fit perfectly
Easy to install...
★★★★★
★★★★★
Margaret W - August 1, 2021
Verified Purchase
super easy install
The part came as expected. We watched the video before we did the install. The video was very, very helpful. The gasket went in quickly and easily. In fact it was so easy we were sure we made a mistake someplace.
Dishwasher is working fine and no leaks, so we did it right.
★★★★★
★★★★★
Lynn M - July 28, 2021
Verified Purchase
Perfect part for my leaking dishwasher. Easy repair, take note of how the old gasket was installed while removing. Clean well before installing new gasket. Works like a new dishwasher!
The part came in a short period of time, well packaged, perfect condition.
★★★★★
★★★★★
Timothy F - May 25, 2021
Verified Purchase
Part fit perfectly
Very easy to replace the door gasket seal. Stopped the leaked. Saved a ton of $$ compared to purchasing a whole new dishwasher.
★★★★★
★★★★★
Suzanne B - December 17, 2020
Verified Purchase
Easy repair
Part fit fine and dishwasher no longer leaks saved myself a lot of money.
★★★★★
★★★★★
Darlene B - April 18, 2020
Verified Purchase
Easy Repair
It was very easy to replace the door gasket. I watched the video & it was as easy as he said! Took a day or two to stop leaking but now it’s working great again. No leaks!!!!!!
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 23 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher leaked when running, noticed worn gaskets
I consulted the videos and they did a good job of showing what needed to be done. Both the gasket band seal fit. The seal at the bottom of the door was not designed to be a very tight fit, so I used the adhesive. There were some plastic drain cups that were also included with the lower door seal kit that would have required more time and
... Read morewould require getting deeper into the dishwasher to replace them. They were not worn or broken, so I left them in place.
Partselect provided me with tracking information for my order, they also provided an installation video. So when I replaced the door seal it was a few minutes to remove the old seal and about five minutes to put in the new one and it was all done.Thanks to Parts select it was a piece a cake
Kenneth from SIGURD, UT
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher leaked bottom corner
Removed existing gasket by pulling up from the bottom edge. Clean groove where gasket came out of with a tooth brush and then replace gasket starting in the middle near the door latch. Make sure gasket is evenly distributed on both sides.
Ken from ELLINGTON, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
New door seal difficult to insert.
The first try didn't go well. The door didn't stay locked because the new seal was preventing it. I pulled it back off for the second try and first I let it soak in the hot water for a few minutes to soften the rubber. Then I lubricated it with Vaseline and now the seal got in the grove easily and completely. I believe that that ste
... Read morep was critical to ensure 100% success rate. After that everything was fine, the door locked properly, and, of course, there was no more leaking.
Read less
Andre from Sugar Land, TX
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seal was worn and leaky
Note orientation of the old gasket before removing it, so you can put the new one in right. Pull the old one out, which is a snap. Mark the center of the new one and push the center into the channel with your thumb nail at the top middle of the machine. Continue pushing it in on both sides, from top to bottom, in a steady, fluid motion; d
... Read moreon't stretch it. If there is a bit extra at the ends, cut it off with a scissors, being conservative so you don't cut it too short. The new gasket will make the door a bit harder to close, but that's what you want.
Read less
Kevin from Port Orchard, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking small leaks at the corners of the front door.
Installed the new tub gasket, fairly simple. Installed the bottom door seal not so easy. Leaks are still present.
Brian from LOS ALAMOS, NM
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My new rubber gasket did not have a white line like stated but I figured it out after studing it a few times.
Once I figured it out it was not bad at all and most of all it worked, no leaks. I just cleaned some old glue off the stainless steel, dried it well, ran a bead of glue like directions showed, squeezed in the new gasket, closed the door for 24 hours then ran the dishwasher. No Problems.
John from SOUTH LYON, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwaster was leaking when running.
1. Removed lower dish tray. 2. Removed old gasket by pulling it out. Came out easy. 3. Cleaned gasket track of food particles with toothbrush and rag. 4. Found center of new gasket and installed new gasket by starting at the top center and work around track pushing gasket in until seated. 5. Tested and no leaks.
Brian from Virginia Beach, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door pops open easily
We have been living with this problem for a couple of years. My wife resorted to leaning a chair with a bag of potatoes against the door. As time went on, she had to use heaver and heaver potatoes. Soon, nothing would hold the door shut. As a last resort (after calling Kitchen Aid and finding out my extended warranty that was paid for 5 y
... Read moreears wouldn't cover the repair due to some technicality), I decided to try and replace all three items that could contribute to the door not staying shut. The Strike Plate, Door Latch and Door Seal. Parts were easy to find on the web site and delivered from PartSelect in record time. The installation was fairly easy. I loosened the star head screws holding the Stainless outer front panel to the inner panel. These are located all around the inside of the door. The Stainless front panel then separated a bit, like a "V". I didn't completely remove the front panel as there seemed to be some wires connected that I didn't want to mess with. So I just tilted it forward and reached inside to remove the 2 screws holding the door latch. Replaced it and the door seal. Removing the strike plate required slipping a knife under the plate and releasing the spring prongs from he sides. It all seemed very intuitive. Even though we were expecting to be dishwasher shopping the next day - The door stayed shut and has worked great now for a month.
Cleaned area, applied sealant and laid the sealant in. Unfortunately, it did not work. Still leaks. Going to the maytag store to get another and try again.
Susan from Prairie du Sac, WI
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
14 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bobbi
February 11, 2019
Dishwasher has small leak in the front of the right lower door. Repairman appointed by american home shield brought a gasket but in looking, did not think it would work. Was visibly much wider. Cannot find a replacement on your website using the model and serial numbers. A sticker on the top of the dishwasher door listed a "part number" (9743396revc), but i do not know this relevance to the door gasket.Suggestions?
For model number KitchenAide MOD NO. KUDS24SEBL1
Hello Bobbi, Thank you for contacting us. The leak could be caused from any one of the door seals. I suggest checking the follow parts: PS356593 Lower Door Seal Kit, and PS12348985 Door Gasket. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Don
May 7, 2019
I need the black cabinet seal, part no. 8269110, as mine is disintigrating but I was not sure this one is the correct replacement part. Will this one work with my model dishwasher?
For model number Kenmore 665.16049400
Hello Don, thank you for inquiring. For your model the inner cabinet Seal is part PS11731683 and the Door Gasket is this part PS12348985.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Blain
May 20, 2019
Do i need adhesive for the door gasket ps12348985? If so what do you recommend.
For model number 665.77972k703
Hello Blain, thank you for your question. There is a channel that the Door Gasket fits into to hold it on. If you find you do require adhesive, then Heat Resistant Adhesive part PS11728058 will be sufficient.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
July 20, 2021
I ordered the door gasket for my dishwasher and noticed that it does not cover the bottom by the door. Is this a separate part?
For model number 66513123K701
Hello Dan, Thank you for the question. The Bottom Door Gasket is only sold as part of the Inner Door. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joe
August 9, 2019
Replaced door gasket on dishwasher , no leaks but the door if difficult to close, i checked gasket and it seems to be properly seated , thanks
For model number kudm25shwh1
Hello Joe, thank you for contacting us. If it is not the Door Gasket part number PS11747084 for your model being incorrectly installed, then you may want to consider either the Door Spring part number PS11747091 or the Door Switch part number PS358749 for your model. I hope this helps and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ron
December 10, 2018
Door leaking at the corner replaced the seal still leaks , not as much. Noticed the seal was some what smaller than original, need your seal part number, i find that there to many seals with different part #'s, can i order from KitchenAid?? also should i trim any excess at the bottom of the seal
For model number kudk03itbs3
Hello Ron, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12348985. The gasket will not need to be trimmed. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Beverlee
August 26, 2019
I replaced the gasket, and it seems to fit, but the door will not stay shut. The new gasket seems to be bigger than the old one. Do I need to replace the strike plate and/or the door latch, as another customer had to do? Or can you suggest something else?
For model number KUDP02FRBT1
Hi Beverlee,
Thank you for your question. If the door will not stay closed, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=KUDP02FRBT1&mfgModelNum=&fkMfgID=3&ModelMasterID=92714&PID=91. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Beverlee
August 26, 2019
2nd try--i replaced the gasket, because the door was leaking. The new gasket seems to fit, but now the door will not stay closed. The door stays closed with the old gasket, so it seems the new gasket is too big. The new gasket is a different shape than the old gasket.
For model number KUDP02FRBT1
Hi Beverlee, thank you for contacting us. You are going to have to look at the parts to see why your door is not closing correctly. If you installed this part correctly and all of your parts are fine then you should have no issues closing the door. I would suggest you look at the parts and see if they are all undamaged and you may also want to make sure you installed the part correctly. We have a video above that you can look at to reference. Here is the link: https://youtu.be/GbGVrTUIczk. Good luck with your repair.
Was this helpful?
Thank you for voting!
Karen
June 24, 2021
We are trying to complete our kitchen with this new dishwasher. There is a gap between dishwasher and cabinets. Do you sell a product that fills that gap? I am afraid that if I start it and use dishwasher it will move or leak water. I did see part w10864081. It says it is for door. I am trying to wrap this project up your response will help me. If you do not have an item like this what can I do to fix problem. Thank you. Karen
For model number FFCD2413UB0A
Hello Karen, Thank you for the question. The Seal is not to fill a gap between the appliance and the Kitchen Cabinet sorry. The seal forms a watertight barrier between the door and the dishwasher tub. The Appliance should be mounted to prevent it from moving. Checking the model we do not list the optional Trim or Filler kit to fill in any gaps. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps.
The bottom door gasket is only sold as part of the inner door. What is the part number? I do not need what I ordered because the sales rep said that I would need this part (door gasket) to fix the problem. All I need is the part you described for under the door. Dan
For model number 665.13123K701
Hello Dan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2326584. We looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers and contact us back with he updated substitution number. We hope this helps!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Dishwasher","title":"Dishwasher","url":"/Dishwasher-Parts.htm"},{"position":2,"name":"Seal or Gasket","title":"Seal or Gasket","url":"/Dishwasher-Seals-and-Gaskets.htm"},{"position":3,"name":"W11196317","title":"W11196317","url":""}]
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
