Whirlpool/Whirlpool_Thumb/GWOHKAJE.gif
See part 3 in the diagram
Replacing your KitchenAid Dishwasher Door Gasket play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Door Gasket

★★★★★
★★★★★
17 Reviews
$80.12   On Order

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12348985
Manufacturer Part Number W11196317
Manufactured by Whirlpool
Product Description

Door Gasket Specifications

This is a door seal, but you may also know it as a door gasket and it is a part for your dishwasher. It provides a leak proof seal between the tub and the door of your appliance. You will need to replace the door seal if you are experiencing leaking from the front of your dishwasher. Once you have removed your old seal, we recommend inspecting the groove to make sure there are no food particles or debris caught inside that will impede the installation process.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# W11196317 replaces these:
AP6327300, 8193709, 8193906, 8193942, 8268938, 8531629, 9742612, 9743590, W10112096, W11190760, WPW10112096
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

7 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Bobbi
    February 11, 2019
    Dishwasher has small leak in the front of the right lower door. Repairman appointed by american home shield brought a gasket but in looking, did not think it would work. Was visibly much wider. Cannot find a replacement on your website using the model and serial numbers. A sticker on the top of the dishwasher door listed a "part number" (9743396revc), but i do not know this relevance to the door gasket.Suggestions?
    For model number KitchenAide MOD NO. KUDS24SEBL1
    Hello Bobbi, Thank you for contacting us. The leak could be caused from any one of the door seals. I suggest checking the follow parts: PS356593 Lower Door Seal Kit, and PS12348985 Door Gasket. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Don
    May 7, 2019
    I need the black cabinet seal, part no. 8269110, as mine is disintigrating but I was not sure this one is the correct replacement part. Will this one work with my model dishwasher?
    For model number Kenmore 665.16049400
    Hello Don, thank you for inquiring. For your model the inner cabinet Seal is part PS11731683 and the Door Gasket is this part PS12348985.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Blain
    May 20, 2019
    Do i need adhesive for the door gasket ps12348985? If so what do you recommend.
    For model number 665.77972k703
    Hello Blain, thank you for your question. There is a channel that the Door Gasket fits into to hold it on. If you find you do require adhesive, then Heat Resistant Adhesive part PS11728058 will be sufficient.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Joe
    August 9, 2019
    Replaced door gasket on dishwasher , no leaks but the door if difficult to close, i checked gasket and it seems to be properly seated , thanks
    For model number kudm25shwh1
    Hello Joe, thank you for contacting us. If it is not the Door Gasket part number PS11747084 for your model being incorrectly installed, then you may want to consider either the Door Spring part number PS11747091 or the Door Switch part number PS358749 for your model. I hope this helps and good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Ron
    December 10, 2018
    Door leaking at the corner replaced the seal still leaks , not as much. Noticed the seal was some what smaller than original, need your seal part number, i find that there to many seals with different part #'s, can i order from KitchenAid?? also should i trim any excess at the bottom of the seal
    For model number kudk03itbs3
    Hello Ron, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12348985. The gasket will not need to be trimmed. Hope this helps, good luck with this repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Beverlee
    August 26, 2019
    I replaced the gasket, and it seems to fit, but the door will not stay shut. The new gasket seems to be bigger than the old one. Do I need to replace the strike plate and/or the door latch, as another customer had to do? Or can you suggest something else?
    For model number KUDP02FRBT1
    Hi Beverlee, Thank you for your question. If the door will not stay closed, there are some parts that you will need to check to see which one is causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=KUDP02FRBT1&mfgModelNum=&fkMfgID=3&ModelMasterID=92714&PID=91. I hope this helps. Thank you and have a great day!

    Was this helpful?
    Thank you for voting!
    Beverlee
    August 26, 2019
    2nd try--i replaced the gasket, because the door was leaking. The new gasket seems to fit, but now the door will not stay closed. The door stays closed with the old gasket, so it seems the new gasket is too big. The new gasket is a different shape than the old gasket.
    For model number KUDP02FRBT1
    Hi Beverlee, thank you for contacting us. You are going to have to look at the parts to see why your door is not closing correctly. If you installed this part correctly and all of your parts are fine then you should have no issues closing the door. I would suggest you look at the parts and see if they are all undamaged and you may also want to make sure you installed the part correctly. We have a video above that you can look at to reference. Here is the link: https://youtu.be/GbGVrTUIczk. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your KitchenAid Dishwasher Door Gasket

      Replacing your KitchenAid Dishwasher Door Gasket play video
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 20 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      dishwasher leaking
      remove old seal, clean and dry the gap where the new seal will be installed. Apply adhessive, place new seal, then let dry for 24 hrs.

      The hardest part was getting the seal, we first ordered from a sears parts store locally. They also told me that everything was included to install it, but they did not include the adhesive, they lost the order via ups and never notified me. I finally called them and they made me go back to the parts store for a refund. I then ordered on parts select and they had it in my hands in 3 days.
      • Noelle from Tucker, GA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        W11196317, W10864081
      83 of 105 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Door seal on dishwasher frame was brittle and deteriorated
      Didn't have to remove any screws, etc. Just had to pull the old gasket out of a grove in the top and sides of the frame, clean up the particles caused by the deterioration of the old gasket, and install the new gasket. Have to be careful to start at the top center of the frame exactly in the midpoint of the gasket and carefully push the gasket into the grove with your hands. Try not to stretch the gasket. There will be about 2 inches of extra gasket laying on the bottom on each side of the dishwasher, and that is OK.
      • Tracy from Jupiter, FL
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        W11196317
      50 of 54 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Door pops open easily
      We have been living with this problem for a couple of years. My wife resorted to leaning a chair with a bag of potatoes against the door. As time went on, she had to use heaver and heaver potatoes. Soon, nothing would hold the door shut. As a last resort (after calling Kitchen Aid and finding out my extended warranty that was paid for 5 years wouldn't cover the repair due to some technicality), I decided to try and replace all three items that could contribute to the door not staying shut. The Strike Plate, Door Latch and Door Seal. Parts were easy to find on the web site and delivered from PartSelect in record time. The installation was fairly easy. I loosened the star head screws holding the Stainless outer front panel to the inner panel. These are located all around the inside of the door. The Stainless front panel then separated a bit, like a "V". I didn't completely remove the front panel as there seemed to be some wires connected that I didn't want to mess with. So I just tilted it forward and reached inside to remove the 2 screws holding the door latch. Replaced it and the door seal. Removing the strike plate required slipping a knife under the plate and releasing the spring prongs from he sides. It all seemed very intuitive. Even though we were expecting to be dishwasher shopping the next day - The door stayed shut and has worked great now for a month.
      • Martin from Raleigh, NC
      • Difficulty Level:
        Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Screw drivers
      • Parts Used:
        WP8574157, W11196317, 8193830
      40 of 50 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dishwasher leaking water
      Install was very easy. Used hands, pliers to pull out old gaskets. Wiped down old dirt in track. Started from (top) middle of door frame and used some soap with warm water to insert new gaskets. That's it! Kept old plastic brackets in place because it was too difficult to remove door springs. Old door seal and lower door seal were badly worn (gummy and falling apart) - Thought that was the issue with the water leaking. Nope, I was wrong. Looks like the tub seal, and the plastic bearing that is under the spray arm. Going to buy new instead of diving in the money pit. 10 years old, motor corroded from water over the years.
      • Evan from Hudson, MA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers
      • Parts Used:
        W11196317, 4172127
      14 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Seal on dishwasher worn out and coming loose.
      Removed old seal, cleaned track, applied adhesive for new seal, seated new seal in track, closed door for 24 hours to allow adhesive to cure, then used dishwasher without difficulty. An easy repair.
      • william from Wethersfield, CT
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        30 - 60 mins
      • Parts Used:
        W11196317
      14 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Replace old leaky door seal with replacement part
      I peeled off the old seal and replaced with the new seal. The instructions were clear and easy to follow, however the new seal made the door not stay closed as the friction catch at the top was no strong enough to overcome the tension of the door closed with the new seal.

      There were explicit instructions on the way the seal was to work with the sealed edge spreading into the tub area as the door closed. I was very careful to follow those instructions and made sure to seat the seal carefully. After I reinstalled the seal three times to see if I could get it to seat properly, as a last ditch effort I reversed the seal to the opposite way the instructions indicated and it worked with the door closing properly and the seal didn't leak.

      Based on looking at the old seal and how it was originally installed, I actually think the seal was out of spec for the unit. However, if it isn't leaking that is what it's all about so we will see how long it holds.
      • Bob from Lake Forest, IL
      • Difficulty Level:
        A Bit Difficult
      • Total Repair Time:
        15 - 30 mins
      • Parts Used:
        W11196317
      9 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Leeking dishwasher
      Grabbed old seal and removed it.(notice how seal was situated in slot)

      Pushed new seal in slot that held old seal. close door.

      If dishwasher still leaks you put the seal in backward (I did!)remove seal reverse it and reinsert it.
      • Lew from Lewiston, CA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Parts Used:
        W11196317
      7 of 7 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dishwasher was leaking water at the door
      The lower door seal had fallen out as it was worn out so I wasn't sure of the proper orientation of the new seal or even where it went as the instructions had nothing about the seal. A little bit of logical thinking and the seal just just snapped in place. The door drains that came with the kit were both a right or left hand and so I didn't install them. Turns out that I didn't need the new ones anyway. The old door seal just pulled out and the new one just pushed into place. I was careful to center the top of the strip so that it would come out even at both sides of the bottom. There were no instructions for the door seal but none were needed. As long as I was working on the washer I did some cleaning to make it look new and bright...that took the most time. Easy repair and a happy wife besides.
      • Kenneth from Golden Valley, MN
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        Less than 15 mins
      • Tools:
        Nutdriver
      • Parts Used:
        W11196317, 4172127
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Dishwasher door leaked
      Just removed the old seal and followed the instructions that came with the new one. Since the old one didn't have any adhesive on it ,I didn't use the adhesice on the new one. Problem solved!
      • Edward from Tucson, AZ
      • Difficulty Level:
        Easy
      • Total Repair Time:
        Less than 15 mins
      • Parts Used:
        W11196317
      5 of 6 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      washer leaked due to torn seal
      Removed the old one, cleaned out the groove, dry fit the gasket, made a small cut to fit length, removed, squeezed the glue into the track and then put gasket in. Had to wait 24 hours for glue to cure.
      No leaks.
      • william from nutley, NJ
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Parts Used:
        W11196317
      5 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      17 Reviews
      4.8
      Filter By Rating:
      • 5 Stars
        16
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS12348985
      Manufacturer Part Number: W11196317
      Brand
      Model Number
      Description
      Kenmore
      665110739120
      Dishwasher
      Kenmore
      665110739130
      Dishwasher
      Kenmore
      665110739140
      Dishwasher
      Kenmore
      665110739190
      Dishwasher
      Kenmore
      66513102K900
      Dishwasher
      Kenmore
      66513102K901
      Dishwasher
      Kenmore
      66513102K902
      Dishwasher
      Kenmore
      66513103K900
      Dishwasher
      Kenmore
      66513103K901
      Dishwasher
      Kenmore
      66513103K902
      Dishwasher
      Kenmore
      66513104K900
      Dishwasher
      Kenmore
      66513104K901
      Dishwasher
      Kenmore
      66513104K902
      Dishwasher
      Kenmore
      66513109K900
      Dishwasher
      Kenmore
      66513109K901
      Dishwasher
      Kenmore
      66513109K902
      Dishwasher
      Kenmore
      66513112K700
      Dishwasher
      Kenmore
      66513112K701
      Dishwasher
      Kenmore
      66513112K702
      Dishwasher
      Kenmore
      66513113K700
      Dishwasher
      Kenmore
      66513113K701
      Dishwasher
      Kenmore
      66513113K702
      Dishwasher
      Kenmore
      66513114K700
      Dishwasher
      Kenmore
      66513114K701
      Dishwasher
      Kenmore
      66513114K702
      Dishwasher
      Kenmore
      66513119K700
      Dishwasher
      Kenmore
      66513119K701
      Dishwasher
      Kenmore
      66513119K702
      Dishwasher
      Kenmore
      66513122K700
      Dishwasher
      Kenmore
      66513122K701
      Dishwasher

      Get in touch, we're here to help!

      Open until 10PM EST

      Contact Customer Service