Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David S - September 23, 2023
Verified Purchase
Perfect parts
Saved my wife’s KitchenAid mixer after she connected a tomato strainer purchased on Amazon. It locked up almost immediately and stripped the gears in the mixer. These parts fit and work perfectly saving a $500 mixer. Fast shipping and great parts! Easy fix!
★★★★★
★★★★★
Clayton Q - April 6, 2023
Verified Purchase
Worked as expected
Delivery from FedEx took over a month. Unacceptable in my opinion. Use a different delivery provider.
★★★★★
★★★★★
John D - March 9, 2023
Verified Purchase
The parts worked.
It was a little confusing to figure out which drawing and parts would work for my machine since the model numbers don't quite match. But after comparing drawings and parts with my worn ones I chose various with a bit of apprehension. The parts arrived in a timely manner. They fit right. Much better information and choices than are available on the OEM's site. Whenever I need to do more repairs I will definitely use your company if at all applicable.
★★★★★
★★★★★
Paul W - December 8, 2022
Verified Purchase
Just what was needed
The part came quickly and was relatively easy to install. The hardest part was cleaning out all the grease from the housing, to make sure there were no metal fragments left from the sheared gears.
★★★★★
★★★★★
Joe G - April 22, 2022
Verified Purchase
all parts worked great
Machine is working like new
★★★★★
★★★★★
Myralee D - April 5, 2022
Verified Purchase
Great Experience
The part I needed for my mixer came quickly and was exactly what I needed! The ability to get this part saved me from having to buy a new mixer. Thank you!
★★★★★
★★★★★
Cathy H - March 16, 2022
Verified Purchase
Glad could get parts.
I needed several parts to repair my kitchenaid mixer. Thankfully I was able to get them very quickly and am back in the “mixing “ business!
★★★★★
★★★★★
Tyler S - December 19, 2021
Verified Purchase
Looks like high quality parts.
These parts seem to be much better quality than some I had ordered off of Amazon. The repair went smoothly and I hope they last a good long time.
★★★★★
★★★★★
Vadim Z - June 10, 2021
Verified Purchase
worked a expected
I have my mixer back on line
★★★★★
★★★★★
Katherine C - April 13, 2021
Verified Purchase
Part was exactly as described and super fast shipping
I was pleased at how quickly I received the part and felt the service was great.
< Prev
1
2
3
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 21 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Gears stripped
Dismantling was a little difficult, because the snap ring was soooo tight. (Our snap ring pliers aren't the best.) We also bought gear grease and a new gearcase housing. Unfortunately, we didn't realize that the housing had broken until we were removing the old gasket. Once we had all the parts, it was basically a plug and play set up, a
... Read moreside from the snap ring, lol. I really appreciated the schematics that this website supplies. It helped us to know what parts to order.
I used it to make bread - it worked like a dream :)
removed top housing, removed gear housing cover, removed all gears, cleaned out all grease, obtained gears and new housing cover, fit all gears in housing, filled with grease and put on housing cover. Reassembled mixer.
Worm gear had stripped so changed out several gears and parts
Opened the gear housing and removed all gears. Cleaned out all grease. Biggest issue was getting the retaining ring; very tight. Gears were difficult to pull easily. In replacing gears they did not sit easily and took a little rubber hammer to re position worm and upper gear. Be sure to have the right grease for food devices and don’t un
... Read moreder grease. And have patience of which I have a short supply.
Took it apart, found stripped gears, a common problem. Reviewed parts diagram on your website. Got the parts, reviewed the diagram, removed defective parts, used retaining ring pliers. put it back together, put new grease in, tried it out. Very easy fix
Unscrew the top and remove it , 4 more screws to remove the top of gear box , wipe out the old grease , lift the gears , but to remove the center gear you need a special narrow tip plier to remove the snap ring . Changed the center gear , apply new food grade grease and with reverse order putting back all remaining parts . Worked fine .
Reza from STAMFORD, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gear housing cracked, gear had nic in it
Removed old housing, pulled spring clip, slide on new gear and replaced clip. Put on new gasket and housing. Replaced outer cover. Done.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
11 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
June 12, 2019
Does this order come with both bevel & hub gears (shown in the photo) for $16.29?
For model number 9703337
Hello Ken, thank you for your question. Yes, this includes what is shown in the picture.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Hank
March 13, 2018
I need the main drive gear that is operated by the motor. I believe the part number is apart number 18. It’s the gear that is about 1.25 inches in diameter and about 1/4 inch in height. What is the cost of this gear?
For model number kp26m1xpm
Hello Hank, thank you for your question. The gear that is attached to the motor shaft is item # 18 part number WP9709231. Then there are two gears that turn on the shaft of the gear I just mentioned. Part number W11086780 and W11192795. There might be some pictures of the parts you can find online, as we unfortunately, don't have pictures on our site at this time. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dan
June 26, 2019
Does the gear hub replace part # 8 and 5 from the picture of the mixer parts? Both of the gears sheared on my mixer.
For model number 4KP26M1XLC
Hello Dan, Thank you for the question. Yes, this Includes both the attachment and beveled gear. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Martin
May 20, 2019
Hello i need to replace the worm gear and hub gear in a kitchen aid professional 550 hd would you have these in stock?
For model number KV25MCXER
Hello Martin, thank you for inquiring. For your model this Hub Gear is the correct replacement. The Worm Gear is part PS12070620.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
May 7, 2019
Need to replace the gear hub gears on my mixer. Just confirming if this part is the correct one for my mixer. Part # ps12348886
For model number kp26mixmr
Hi Jeff,
Thank you for your question. Yes, this would be the correct hub gear for your mixer. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Pamela
February 7, 2020
So these parts fit this stand lift mixer?
For model number 4KV25H0XER5
Hi Pamela. Yes this part fits mixer 4KV25H0XER5. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Cristian
July 14, 2021
Hello, I would like to know if this piece fits the mentioned model. Thank you
For model number KitchenAid 7-Quart Stand Mixer
Hello Cristian, Thank you for the question. In order for us to locate the correct parts and repair information we will require the model number of the unit. KitchenAid 7-Quart Stand Mixer is just the type of appliance, not a model number. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Eduardo
March 14, 2022
Is this part compatible with this model KITCHENAID KV25MCXCU
Part #8 12348836
Thank you.
For model number KV25MCXCU
Hi Eduardo,
Thank you for your question. Yes, this would be the correct hub gear for your mixer. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
July 12, 2021
The attachment gear on the mixer is frozen. The gear slowly froze when we used the front accessory drive for the first time. I am not knowledgeable enough to know if replacing these gears will fix the problem. Any suggestions?
For model number KSM150PSAC0
Hello Terry, Thank you for the question! If the Gear is froze, it will need to be replaced to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
Lisa
April 23, 2018
The piece that holds the beater shaft was loose and fell out exposing the gears. What parts do i need to repair this?
For model number KV25G0XMC
Hi Lisa,
Thank you for your question. I believe that would be your planetary. You should be able to find that part in your Color and Variation Parts diagram. I hope that helps. Good luck with your repair.
