12344581-1-M-GE-WR01X27364-Door Hinge Nylon Washer
Part Location Diagram of WR01X27364 GE Door Hinge Nylon Washer
See part 281 in the diagram
( Grid squares measure 1x1 inch )
12344581-1-S-GE-WR01X27364-Door Hinge Nylon Washer 12344581-2-S-GE-WR01X27364-Door Hinge Nylon Washer 12344581-3-S-GE-WR01X27364-Door Hinge Nylon Washer Part Location Diagram of WR01X27364 GE Door Hinge Nylon Washer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Door Hinge Nylon Washer WR01X27364

★★★★★
★★★★★
2 Reviews

Rated by 2 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.47
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS12344581
Manufacturer Part Number WR01X27364
Manufactured by GE
Product Description

Door Hinge Nylon Washer Specifications

This is the replacement hinge washer for your refrigerator. The hinge washer is mounted on the top of the door hinge pin, and supports the refrigerator door, allowing it to open and close easily. The main reason you would need to replace the hinge washer is if it is worn out, causing the refrigerator door to be more difficult to open and close. You may also hear an unpleasant noise when you open your refrigerator door. The washer is a little less than an inch in diameter and is sold individually. This is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door won’t open or close
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WR01X27364 replaces these:
AP6277920, WR01X10146, WR1X10146
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harry K - November 12, 2018
  Verified Purchase
Great. Did the job.
Great. Did the job.
★★★★★
★★★★★
William C - August 2, 2018
  Verified Purchase
Many, Many Parts
I know that it is just a "washer" in association with a hinge pivot, but, Partsselect, their instructions (also YouTube videos) have saved me thousands of dollars in household appliance repairs. Remember, unplug your appliances before working on them and don't work on anything with a capacitor or electrical power storage source. Safety First.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.1 / 5.0, 2 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Both doors wouldn't self close, the freezer door would also stick in the open position.
Another post that said you don't need to buy the whole metal mounting bracket with these cam risers is right. Also, I found 3 different parts that seemed the same ranging from $1.27 up to the mid $20's. I bought 4 of the cheap ones and 2 of the washers. Worked perfectly! Also, the reason this happens is because no one lubricates the cams, like everything else. Add some grease when you put it back together.

I used a 5/16 nut driver to take off the top hinge bracket. Lift off the door after emptying it. Place the door on something so you can work on it. Unscrew the cam attached to the bottom of the door with your nut driver. Remove the bottom hinge bracket with the nut driver and drill out the rivet holding on the cam piece. Attach the new cam plastic piece and place the washer in the space under the plastic where the hinge post will go. Put grease on both cams! Place the door back on the hinge post. Reattach the top bracket. Adjust the top bracket by sliding the door around until it is straight. Then tighten the top screws.

$10 in parts to get a new working door. The seal even grabs better!
Read less
Other Parts Used:
Hinge Cam Riser Door Hinge Nylon Washer
  • Jeff from Elk, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The condensor fan in the unit appeared to have been chewed by a mouse and would not function and the lower door was too low.
The condensor fan in the unit appeared to have been chewed by a mouse and would not function. We had a service call to verify this and ordered the parts. Delivery was extremely quick and we were able to complete the repair and place the unit back into service within 2 hours.

All that was necessary was to remove the bottom cardboard cover, replace the fan and grommets, and replace the door bushings.

Thanks!!
Read less
Other Parts Used:
Compression Ring Condenser Fan Motor Evaporator/Condensor Fan Grommet Door Hinge Nylon Washer
  • Eugene from Marion, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
20 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Oswyn
April 18, 2019
How do you replace part #281 and part# 285 attach to the door hung.
For model number Gth17jbd4rww
PartSelect logo
Hello Oswyn, Thank you for the question. The door will need to be removed in order to install the items. They can not be installed while the door is still hung.Hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Back to Top
You May Also Need ?
Spacer - Freezer Door
$9.42
$9.42
  In Stock
PIN HINGE BOTTOM
$8.06
$8.06
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12344581
Manufacturer Part Number: WR01X27364
Brand
Model Number
Description
General Electric
36211XBMBRWW
Refrigerator
General Electric
36211XBMDRWW
Refrigerator
General Electric
36211XBMERWW
General Electric
36211XBMFRWW
General Electric
36211XBRERWW
General Electric
36211XBRFRWW
Kenmore
36360242000
Refrigerator
Kenmore
36360247000
Refrigerator
Kenmore
36360249000
Refrigerator
Kenmore
36360942000
Refrigerator
Kenmore
36360947000
Refrigerator
Kenmore
36360949000
Refrigerator
Kenmore
36368672895
Refrigerator
Kenmore
36368677895
Refrigerator
Kenmore
36369462990
Refrigerator
Kenmore
36369462991
Refrigerator
Kenmore
36369467990
Refrigerator
Kenmore
36369467991
Refrigerator
Kenmore
36369662991
Refrigerator
Kenmore
36369667991
Refrigerator
Kenmore
36370242000
Refrigerator
Kenmore
36370247000
Refrigerator
Kenmore
36370249000
Refrigerator
Kenmore
36370942000
Refrigerator
Kenmore
36370947000
Refrigerator
Kenmore
36370949000
Refrigerator
Kenmore
36378672895
Refrigerator
Kenmore
36378677895
Refrigerator
Kenmore
36379562990
Refrigerator
Kenmore
36379567990
Refrigerator
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Door Hinge Nylon Washer
$ 9.47
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.