Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Reevance
August 30, 2021
Would not start. Replaced rotary starter switch, got the humming sound but would not ignite. Drum would not turn. What do I need to replace now? Please show video.
For model number DBL333GB6WW
Hello Reevance, Thank you for the question. If the appliance powers on but the drum will not turn and heat will not come on, we suggest testing the Door Switch. When defective it can not tell the controls when the door is closed and its safe to start the tumble and ignite. We do not have a video for the switch sorry. When the door is closed it completes the circuit to the Gray wire on the N.O. Contact. You can temporarily jumper and tape these together to test to see if the switch is defective. We hope this helps!
Can the ignighter have resistance (217.3 ohms) and still not work? Dryer turns on, drum turns, faint propane smell, clothes don’t dry.
For model number GTD75GCSL0WS
Hi Kristin, thank you for your question. We have researched your model and found that the issue is probably with the Igniter, part number PS12342916. If that does not take care of the issue, then the problem is most likely to be related to the Inlet Control Thermostat, part number PS1766014. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Why is the dryer have a strong gas smell when i turn it on and it don’t get hot.
For model number HTX21GASK0WW
Hi Mar,
Thank you for your question. If there is a gas smell coming from your dryer when you turn it on and the dryer is not getting hot, the igniter is not working correctly and it will need to be replaced. The part number listed under your model number for the igniter is PS12342916. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The dryer drum turned ok, but the gas heat did not start.
First I found and watched three videos on how to open the dryer and replace the igniter. Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown. I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the next morning by 9:30 am. I installed the new parts and everything worked fine again. You must be very careful with the igniter to not touch it with hands or anything else. I practiced puting in the old parts first.
Gas dryer was not getting hot and smelled like gas inside drum
Removed lower front panel and then front including door (need to remove the top to access screws.) Replaced both the ingiter and heat detector. The tricky part was getting access to the long tunnel-like bracket that houses the igniter. Washer and Dryer are in a tight cutout space in very small laundry room.
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
