IGNITER WE04X25996 | Official GE Part | Fast Shipping | PartSelect
https://partselectcom.azureedge.net/Schematics/GE/00005070i03.gif

IGNITER

PartSelect Number PS12342916

Manufacturer Part Number WE04X25996

Manufactured by GE

Troubleshooting

This part fixes the following symptoms:

No heat or not enough heat

This part works with the following products:

Dryer, Washer Dryer Combo.

This part works with the following brands:

General Electric, Hotpoint, Kenmore.

Part # WE04X25996 replaces these:

WE04X0739, WE04X10128, WE4X739.
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Customer Repair Stories
Average Repair Rating: 2.5 / 5.0, 2 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Gary L. from Freeport, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
WE04X25996, WE4X448
The dryer drum turned ok, but the gas heat did not start.
First I found and watched three videos on how to open the dryer and replace the igniter.
Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown.
I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the next morning by 9:30 am.
I installed the new parts and everything worked fine again. You must be very careful with the igniter to not touch it with hands or anything else. I practiced puting in the old parts first.
103 of 140 people found this instruction helpful.
Was this instruction helpful to you?
Todd from Santa Rosa Valley, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
WE04X25996, WE4X448
Gas dryer was not getting hot and smelled like gas inside drum
Removed lower front panel and then front including door (need to remove the top to access screws.) Replaced both the ingiter and heat detector. The tricky part was getting access to the long tunnel-like bracket that houses the igniter. Washer and Dryer are in a tight cutout space in very small laundry room.
49 of 83 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
3 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS12342916
Manufacturer Part Number: WE04X25996
Brand
Model Number
Description
General Electric
GFD40GSCM0WW
Dryer
General Electric
GFD43GSSM0WW
Dryer
General Electric
GFD45GSPM0DG
Dryer
General Electric
GFD45GSSM0WW
Dryer
General Electric
GTD65GBPL0DG
General Electric
GTD75GCPL0DG
General Electric
GTD75GCSL0WS
General Electric
GTD84GCPN0DG
Dryer
General Electric
GTD84GCSN0WS
Dryer
General Electric
GUD24GSSM0WW
Washer Dryer Combo
General Electric
GUD24GSSM1WW
Washer Dryer Combo
General Electric
GUD27GSPM0DG
Washer Dryer Combo
General Electric
GUD27GSPM1DG
Washer Dryer Combo
General Electric
GUD27GSSM0WW
Washer Dryer Combo
General Electric
GUD27GSSM1WW
Washer Dryer Combo
General Electric
GUD27GSSM2WW
Washer Dryer Combo
General Electric
XUD27GSSM0WW
Washer Dryer Combo
General Electric
XUD27GSSM1WW
Washer Dryer Combo
General Electric
YFD45GSPM0DG
Dryer
General Electric
YFD45GSSM0WW
Dryer