This is a door bellow, also known as a door seal gasket, made for various models of washing machine. This bellow is designed to seal the inner drum of the washer from the outside of the washing machine and its internal components. If your washer is currently experiencing issues with leaking, this gasket is likely worn out and in need of replacing. This gasket is made of gray rubber and is sold as an individual OEM part and is sold separately from its necessary clamp.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Henry P - January 30, 2024
Verified Purchase
Used YouTube for installment process!
I was slightly intimidated by the process but the part was great and I saved lots of $$$ by doing it myself.
★★★★★
★★★★★
Waz J - February 12, 2022
Verified Purchase
Great part
Fit perfectly…just what we needed
★★★★★
★★★★★
Brad W - September 3, 2020
Verified Purchase
Fit perfectly!!!
This fixed my washer from leaking out the door. FYI - This is a great time to clean out the drain area as mine was full of hair, sand...
★★★★★
★★★★★
David C - May 27, 2020
Verified Purchase
The repair was easy by following a YouTube video
I followed a YouTube video and things went perfectly. The part was perfect and saved me a lot of money by being able to do the installation myself. So glad that I bought the bellow from you.
★★★★★
★★★★★
Alyssa C - May 20, 2020
Verified Purchase
Just what we needed
Our Whirlpool front load washer was leaking out the bottom of the door during heavy cycles. We ordered this replacement seal. Worked perfectly! We've not had any leaks since installing this guy. It arrived very fast too, it was just 2 days from ordering to delivery. Definitely glad we did this instead of a service call!
★★★★★
★★★★★
Kelvin G - May 9, 2020
Verified Purchase
Replacing a washer Bellow
The part did not come with specific instructions. Tried to replace without instructions and it was a nightmare. Went on YouTube for the instructions and it became a piece of cake!! The Bellow works fine.
★★★★★
★★★★★
Jeffrey B - April 9, 2020
Verified Purchase
Work as expected.
Great video showing how to replace.
★★★★★
★★★★★
Joe B - March 11, 2020
Verified Purchase
Just what I needed
Got my parts fast and was exactly what I needed to get my machine back to work quickly..
★★★★★
★★★★★
Mike M - October 10, 2019
Verified Purchase
.Real smooth remove and replace
Could not have been any easier of a remove and replace. Great part
★★★★★
★★★★★
Joe C - January 26, 2019
Verified Purchase
Easy job
Part came fast and was easy to Install. Good quality part as well
< Prev
1
2
3
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
23 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bridget
May 9, 2019
Why do i keep getting black mold/mildew buildup in the rubber seal? It smells bad and is making my laundry smell too. How can i avoid this other than continuing to replace it?
For model number WFW92HEFCO
Hello Bridget, thank you for inquiring. The correct replacement Bellow for your unit is part PS12348225. To prevent this from occurring though, you could wipe around the door and bellow with an old towel after each use to keep moisture buildup and mold growth from occurring. You could also run a hot water cycle with a cup of bleach once a month or so. We hope you find this helpful.
28 people found this helpful.
Was this helpful?
Thank you for voting!
Susan
April 18, 2019
Are there parts that frequently need to be replaced with the bellow?
For model number wfw95hedw0
Hello Susan, Thank you for the question. We also suggest replacing the clamp that holds the bellow, PartSelect Number PS12349413. Thank you for your inquiry, good luck with this repair!
When you open the door the grey rubber seal has mold buildup and it smells we have cleaned it but it keeps coming back. If we replace it is it just going to happen again. It seems like a problem with this model. Is there a fix for this problem.
For model number WFW72HEDW0
Hello and thank you for writing.
No, there is no fix, the only thing you can do clean it regularly and every so often replace the bellow.
Clean Gasket: Use a rag or towel to clean the rubber door gasket on a front-loading washer with either hot soapy water or a spritz of mildew cleaner. Make sure to wipe underneath and around it as well. Be prepared for some slime and gunk, and possibly a stray sock or two. We hope this helps. Please contact us anytime if you require further assistance.
9 people found this helpful.
Was this helpful?
Thank you for voting!
Natalie
September 23, 2019
Do you have instructions on how to replace the washer bellow? I just purchased a replacement one from your company.
For model number WFW86HEBC2
Hi Natalie, thank you for your question. Yes, we have quite a few videos that you can view on our Youtube channel that will show you how an installation like this is done: https://www.youtube.com/user/partselect/search?query=whirlpool+bellow. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ana
February 27, 2019
I saw the model numbers but my is not there. Can i used different model for my washer?
For model number WFW72HEDW0
Hi Ana, thank you for your question. You can definitely try however if you are not looking underneath your exact model information we cannot guarantee that any parts that you find will be correct. If you are just unsure of where your model number is there are a couple of places where you would be able to find your model number. We do have an information graphic that will show you where to look here: https://www.partselect.com/Model-Number-Locator+11+repair.htm. Good luck with your repair.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Robert
December 28, 2019
I'm wanting to replace the bellow/gasket and clamp(as recommended) because ours has been stained from mold/mildew.Is there a disassembly video available that shows how to do that?
thanks a lot!
For model number MHW6000XW2
Hi Robert, this video should help you out: https://www.youtube.com/watch?v=GNrkt7AfW0M. Thank you for your question and good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Lovisa
November 13, 2019
Moldy buildup - seems like a common problem. Can you help me find the right replacement product? Thank you.
For model number WFW75HEFW0
Hello Lovisa, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12074757. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
January 11, 2020
Water does not drain out of boot seal
For model number Wfw8740dw1
Hi Thomas. The most likely cause of not fully draining is a faulty drain pump. Thank you for your question and good luck with your repair!
I need to replace the front boot. What’s is the correct part number and is there anything else i need?
For model number MHW3100DW0
Hello Steve, thank you for your inquiry. For your model MHW3100DW0, the correct part is PS12074757. I hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
May 28, 2023
Does this model of the washer have a vent you have to clean?
For model number WFW70HEBWI
Hello John, thank you for the question. According to our research, your model has a vent system that is behind the outer tub. You can access it by removing the back panel of the washer. We hope this helps!
