Quick Question!

Have you ever purchased from PartSelect.com before?

https://partselectcom.azureedge.net/Schematics/LG/133524-2.gif
See part K121 in the diagram
https://partselectcom.azureedge.net/Schematics/LG/133524-2.gif

BEARING,BALL

Your Price

$26.42
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12072605
Manufacturer Part Number MAP61913715
Manufactured by LG

This bearing, or ball, is a genuine OEM replacement part for your washer. The bearing allows the tub to rotate smoothly. Replacing this part can be helpful if your washer is extremely loud, or vibrates excessively. Sometimes the seal can fail, allowing water to leak into the bearings. Often you will need to replace the inner and outer bearings, as well as the seal, at the same time.

This part works with the following brands: LG, Kenmore.

This part works with the following products: Washer, Washer Dryer Combo.

This part fixes the following symptoms:

  • Noisy.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers, Socket set, Wrench set
Customer: Steven from PHOENIX, AZ

The bearings on the tub were noisey when it was spinning fast speed.

disassembled the top and front installed the shipping bolts in the tub back housing, removed the rear bolt on the stator and removed the shell the magnets have some strong pull, had to split the plastic inner tub in half, removed the 2 lower front shocks and then removed the inner drum,, both bearings and the seal were bad, drove out inner bearing and seal with bearing driver about 2 ft. long and then drove out the rear bearing, cleaned bore and installed new bearings and seal, the spider on the back of the inner drum was damaged from rust damage in the seal area, replaced with new part and reassembled the hardest thing was the 2 side springs, broke one of the plastic noise brackets will order another, got the rest of the washer back together , will install the top after replacing spring noise bracket., block of wood and car spring pliers for rear brakes would probably be easier for the spring install. .Took about 6 hours to disassemble and install new parts. The repair manual was ok for top and front disassembly but no further info on removing the other parts. Used common sense for the rest, used to repair garbage trucks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1

Model Cross Reference

This part works with the following models:

PartSelect Number: PS12072605
Manufacturer Part Number: MAP61913715
Brand Model Number Description
Kenmore79640021900Washer
Kenmore79648842800Washer
Kenmore79648852800Washer
LGWD-3243RHDWasher Dryer Combo - WASHER/DRYER COMBINATION
LGWD-3245RHDWasher Dryer Combo - WASHER/DRYER COMBINATION
LGWM1812CWWasher - Residential WASHER
LGWM1814CWWasher - Residential WASHER
LGWM1815CSWasher - Residential WASHER
LGWM2010CWWasher - Residential WASHER
LGWM2016CWWasher - Residential WASHER
LGWM3431HWasher - WASHER