This motor rotates the glass turntable in the microwave and accepts a D- shaped shaft.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Tray won’t turn
This part works with the following products:
Microwave.
This part works with the following products:
Frigidaire, Kenmore, Uni, Electrolux.
Part# 5304509440 replaces these:
AP6230595, 5304464113
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
5.0
Filter By Rating:
5 Stars
4
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Anthony D - January 14, 2019
Verified Purchase
exact replacement
simple job, the most difficult part of the job was bending over the range to where I was working on the microwave.. the other part I replaced was the turntable driver although your site did not show a picture of the part, I was able to make an educated guess after reading a conversation between your employee and a customer. I am a repeat customer.
★★★★★
★★★★★
Qua L - October 11, 2018
Verified Purchase
Very easy to replace Drive Motor - Grandma can do it!
The part came in very fast - out of my expectation and in good shape! I simply installed it into my Microwave and It worked right away. Thank you!
★★★★★
★★★★★
Mike K - July 22, 2018
Verified Purchase
Easy repair
It installed easily and worked
★★★★★
★★★★★
David S - July 4, 2018
Verified Purchase
Easy Repair, worked, I'm very happy!
So far so good! Easy to install, works great so far, very satisfied right now at the moment! Thanks!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
April
July 25, 2021
Are there instructions available for this part replacement?
For model number FGMV175QFA
Hello April, Thank you for the question. To access the motor you would turn power off to the appliance and remove the screws holding the underside panel of the appliance in place around the outer edge of the bottom. Once the screws are removed, you will see the motor. There should be 2 screws holding the motor in place. Remove the screws and pull down on the motor to release. You will also need to pull the plastic coupler from the post inside the cabinet. Reverse the steps to reinstall and once in place open the door and push the coupler that the turntable rides on in the middle back onto the motor post. You will want to turn it until you feel it slip onto the motor shaft and then push down. Reinstall the base and turn the power back on. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
