This OEM waveguide cover in your microwave is a heat-resistant component that prevents food, grease, and moisture from entering the waveguide. It is typically located on the side or top wall of the cooking chamber. If the cover is broken, you may notice cracks, charring, or burns, and potentially see arcing or sparks during operation. Not replacing a damaged cover can lead to short circuits and the risk of electrical components touching your food. To remove the cover, start by disconnecting the microwave from its power source before opening its door. The waveguide cover is slotted or snapped into place, so gently slide or apply pressure to release it from the clips or slots. Please note that the cover is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave, Range.
This part works with the following products:
Frigidaire, Kenmore, Uni, Electrolux.
Part# 5304509435 replaces these:
AP6230590, 5304464061
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
August 19, 2019
I just purchased this microwave brand new from percy in worcester massachusetts and the wave guide shield cover is ripped how can i get a new one i ordered a 2 pack from amazon and it was the wrong one.
For model number FGMV176NTFC
Hello Paul, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12071278. Hope this helps!
Was this helpful?
Thank you for voting!
Charles
October 20, 2021
What is the part behind the wave guide?
For model number FGMV175QFA
Hello Charles, Thank you for the question. The Magnetron sits behind the Wave Guide Cover. We hope this helps!
Hi Esteban,
Thank you for your question. Yes, this would be the correct wave guide cover for your microwave. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cover needs replacing
You have to be very careful because the wave guide cover is very brittle. It needs to be bent very gently in order to fit the four ends into each slot. I would highly recommend buying two just in case the first one breaks.
Christopher from CARY, NC
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replaced cover
I thought the cover was suppose to come off from the inside of microwave. It is brand new and got bent. So I ordered a new one in case it was not working with a bend in it.
deanna from old town, ME
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Customer Reviews
Average Rating:
★★★★★
★★★★★
6 Reviews
4.3
Filter By Rating:
5 Stars
4
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Eileen S - March 25, 2023
Verified Purchase
Wave guide cover fix where the old one came out. No cutting or adjusting to fix.
Once the cover showed up, it was installed and the microwave was up and running.. thanks for the service.
★★★★★
★★★★★
Joye R - June 24, 2020
Verified Purchase
easy install
The part was new and fit like it should.
★★★★★
★★★★★
Nathaniel C - May 19, 2020
Verified Purchase
Easy Repair
Easy to replace
★★★★★
★★★★★
Jeff A - November 25, 2019
Verified Purchase
Wave cover
Thin silver piece of cardboard to deflect microwaves...
It must work because brand new microwave wasn’t working until we replaced it.
★★★★★
★★★★★
Mildred R - January 18, 2019
Verified Purchase
Worked as expected!
Quick delivery and item was perfect, snapped right in.
★★★★★
★★★★★
Donna T - June 5, 2018
Verified Purchase
part came with a slight crack in it and broke when installing
part came with a slight crack in it and broke when installing
July 6, 2018
Thank you for your review. I’m sorry to hear that happened, we will be in touch soon to help fix this issue.
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12071278
Manufacturer Part Number: 5304509435
With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
★★★★★
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout