This is the control board only. The touchpad is NOT included. This oven control board and clock is for ranges.
The oven control board and clock monitors the oven temperature and controls the oven heating functions in the range, and includes the digital display for the time and temperature settings.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Touchpad does not respond | Will Not Start
This part works with the following products:
Range.
Part# 5304509231 replaces these:
AP6230537, 316557217
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
5 Stars
5
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sandra B - November 10, 2018
Verified Purchase
Easy repair!
replacement part went in as directed and easily! Oven is working back to normal! "dr" code means electric control panel is not working.
★★★★★
★★★★★
GORDON L - July 15, 2018
Verified Purchase
inignter
Di d.c. the trick but new stove should not have failed.
★★★★★
★★★★★
Pam M - November 2, 2023
Verified Purchase
Easy to fix
My stove is about 15 yrs. old and I was told by a couple of people that they probably don't make parts for it anymore. I searched with my part # and Part Select came up had it stock, good price , received it within a week and put it on myself. Saved about $500 not having to buy a new one. ;)
★★★★★
★★★★★
Gary M - August 5, 2020
Verified Purchase
Oven Repair
Part received on time and worked as expected. Appliance back in working order. Parts select great company to deal with.
★★★★★
★★★★★
Morris N - August 11, 2021
Verified Purchase
Replace ECB
The part was the correct part. installed and it worked fine.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven wouldn't turn on
Unplug stove from electricity and turn off gas. Remove Electronic Control Board 4 screws, disconnected wire harness removed face plate from old control board. Put face plate on new control board. Put new control board back on stove using 4 screws. Plugged wire harness into new board. Plug stove back in and turn on gas. Ove
... Read moren is working. Thank you.
Read less
Valerie from DUDLEY, MA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Darlene Inman
November 14, 2018
If I’m continually getting code f13 and have to unplug and re plug in my range for the oven to work, does that mean that the control board needs to be replaced?
For model number Lggf3043kfm
Hello Darlene, Thank you for the question. The "F13" error code means "Bad EEPROM identification/Checksum error". If reseting the power did not help then according to Frigidaire suggested corrective action the electronic oven control (aka Electronic Control Board) has to be replaced. Hope this helps, good luck with this repair!
18 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
December 11, 2019
Oven does not work. Igniter for stove top does not work, no display, no oven light, and oven glow plug/ igniter does not power up. Essentially we have a 5 burner top stove that we must use a propane lighter to even use the top burners.
For model number BGGF3045RFC
Hello Brian, thank you for your question. The electronic control board operates the oven, display and clock. We would recommend replacing the Electronic control Part #: PS12071218 and the SPARK MODULE PartSelect Number: PS11770793. The spark module is the part that lights the top burners. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ronald
June 29, 2021
Self clean does not engage & now oven will not heat up when activated to 350 degrees
For model number LGGF3044LQA
Hello Ronald, Thank you for the question. We suggest testing the Oven Sensor Probe. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the Probe is good, you may have a defective Electronic Control Board. We hope this helps!
Follow up on my original question. Tried the Quick Bake mode & oven worked properly. Does this rule out the sensor?
For model number LGGF3044LQA
Hello Ronald, Thank you for contacting us back. If some settings work and others do not, the Electronic Control Board would be defective and need to be replaced. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Morris
July 26, 2021
Touch pad is not powered. Does not have power, also oven will not operate. Top burners work fine.
For model number LGGF3043KFM
Hello Morris, Thank you for your inquiry. If there is no power to the control board, check the wiring first for any visible damage. If that looks okay, then you need to replace the control board. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Chris
August 4, 2021
F11 fault code will not clear with power off
Oven door locked
Have never used self clean
For model number Lggf3043kfs
Hi Chris,
Thank you for your question. The F11 error code is referring to a shorted key error. This code may appear if you have held down a button on the touchpad for too long. To remove the error code, press the cancel key to remove the code. If this does not help, the electronic control board will need to be replaced. We hope this helps! If you have any questions, please let us know.
Kept getting error code f31 was told to replace temperature probe replaced it and keep getting the same code
For model number Lggf3043kfp
Hello Gilberto, Thank you for the question. The F31 error code means that the control board detects the oven temperature probe circuit is shorted. If the probe did not fix the issue, I suggest checking the wiring. If the wiring is good, the board mat need to be replaced. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bruce
March 15, 2023
The electronics control board doesn't respond. F10 code is flashes all the time.
For model number bggf3042kft
Hi Bruce, thank you for reaching out. According to our research, the F10 error code indicates that there is a problem either with the control board or the temperature sensor. Based on the description that you have provided, we would recommend replacing the control board, part number PS12071218. Before changing the control board, we suggest checking the temperature sensor, part number PS1528542, to make sure it is not malfunctioning. We hope this sorts out your problem!
f31 code ...replaced temp sensor still throws f31...someone at your trouble shooting query suggested checking wiring...looks good coming out of wire bundle with back off...is it possible that there is a short on board that is throwing f31
For model number LGGF3043KFJ
Hi Bill, thank you for contacting us. Based on our research, the error code F31 indicates that the oven temperature probe is shorted. As you have replaced the temperature sensor and the error still occurs, the issue could be most probably with the control board. We would suggest replacing the control board, part number PS12071218, to solve the problem. Glad to be of help!
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Range-Circuit-Boards-and-Touch-Pads.htm"},{"position":3,"name":"5304509231","title":"5304509231","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
