Whirlpool/Whirlpool_Thumb/46WLNAIP.gif
See part 23 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Impeller and Seal Kit.

★★★★★
★★★★★
2 Reviews
$65.81   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12069388
Manufacturer Part Number 8193951A
Manufactured by Whirlpool
Product Description

Impeller and Seal Kit. Specifications

This is the replacement impeller kit for your dishwasher. This impeller kit comes with 4 pieces, including the impeller and seals which you will need for the repair. The impeller and seal kit is mounted on the dishwasher motor. If your dishwasher is not cleaning dishes properly, it may be an indication that your impeller has gone bad, and you are not getting proper water pressure. If the seals have gone bad, your dishwasher may start to leak. If you are having either of these problems, you may need to replace the impeller kit. Be sure to disconnect the water and power source from the dishwasher before you begin this repair. This is an OEM part sourced directly from the manufacturer.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy
This part works with the following products:
Dishwasher.
This part works with the following products:
KitchenAid, Kenmore, Whirlpool, Maytag.
Part# 8193951A replaces these:
8193510, 8193951, 8268403, 8531017
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

5 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Donald
    October 7, 2017
    My glasses on the top rack are not coming clean. I have replaced the seal for the tower sprayer and getting ready to replace the chopper. Any additional thoughts on what may help the glasses on the top rack get cleaned? Thanks!
    For model number GU1500XTLS2
    Hi Donald, Thank you for your inquiry. The chopper assembly fixes the issue the majority of the time so I would start with that, but I would also check the water inlet valve to see if there is enough water pressure. I hope this helps. Thank you and have a great day!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Andy
    November 16, 2019
    My dishwasher is leaking near bottom center ??? help
    For model number du1055xtvq1
    Hi Andy, it is likely the gasket PS5136129. Thank you for your question and good luck with your repair!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Bernie
    November 23, 2019
    This part needs redesign or reinforcement, my dishwasher is only 5 years old and now my second impeller has broken. Replacing this part every 2.5 years is not what i had in mind.
    For model number PS12069388
    Hi Bernie, We believe this is a concern best addressed by the manufacturer. We are a parts distributor. We do not manufacture any units. Please contact your unit's manufacturer, directly. Thank you for your question and good luck with your repair!

    Was this helpful?
    Thank you for voting!
    Frank
    February 3, 2020
    If you do not need the impeller in the impeller kit, just the seal, is it possible to get the items separately?
    For model number DU1055XTVB3
    Hello Frank, thank you for your question. The manufacturer only provide the seal in the kit with the impeller. There is no way to get that part separately. I hope this helps.

    Was this helpful?
    Thank you for voting!
    Sylvain
    October 31, 2019
    Hello, i replace the impaller (ps12069388) and the volute (ps2376302) but the dishwasher still leaking. Do you have a tip for me?
    For model number KitchenAig kuds03ftss3
    Hello Sylvain, thank you for your question. We would recommend checking the placement of the volute and impeller and if the water is coming from that area the parts may not be lined up properly. Also check the Sump With Seal Part #: PS11746658 to see if the seal that is between the sump and the cover is sealed properly and not leaking. I hope this helps!

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your KitchenAid Dishwasher Impeller and Seal Kit.

      Customer Repair Stories
       Average Repair Rating: 2.4 / 5.0, 6 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Started with a grinding noise in the bottom of the dishwasher, and then the thing just stopped cleaning the dishes. It wasn't pumping any water,
        I removed the plasic inner parts, used the torx drivers to remove the internal platic plate that covered the sump. Found the food chopper cover and removed it. It had gotten a piece of plastiic wrapped around it. As it spun it had ground the teeth off the end of the drive on the impellor and the food chopper. I replace both as a set and it works fine.
        89 of 152 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dishes would not clean
        Checked grinder and cleaned it several times, adjusted blades. Dishes would be clean for approx. 6 cycles, then would not clean. Placed dishwasher on its front and removed the motor. Removed grinder and impeller which I found to be worn so that the blades would not turn on the grinder which caused it to collect food particles. The impeller locks in easily.
        • Kathryn from Gordon, NE
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          8193951A
        36 of 42 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        The ceramic seal had failed, allowing water to destroy the front motor bearing.
        Removed dishwasher from under the counter and took it to my shop. With the washer on its side, I removed the motor, then the impeller and seal. I then disassembled the motor and replaced the front bearing(purchased separately). This required an arbor press. I then reassembled the motor and installed the new seal and impeller. Reassembled in reverse order. Reinstalled under the counter and made conections. Checked for leaks and proper operation.
        • Jerome from Greensburg, IN
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
        • Parts Used:
          8193951A
        19 of 26 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dishwasher would not pump water
        .The easiest way to complete the impeller and chopper motor replacement is to disconnect the power, water and drain line, remove the dishwasher from the cabinet, set the washer on its back.

        From this point everything is visible, pump housing, motor, etc. and it's a matter of disassembly and reassembly. Make note or a drawing of where all the wires are connected so you reconnect them in the right spots.

        Reinstall water lines and power and check for leaks before replacing shield or kick plate.
        • Gerald from Simsbury, CT
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Pliers, Socket set, Wrench (Adjustable)
        • Parts Used:
          8193951A
        17 of 34 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Chopper assembly failure
        If your chopper assembly has a catastrophic failure like mine did, chances are it took out the teeth on the circulation motor as well. This will lead to the teeth on the chopper being destroyed by the impeller as soon as you turn the dishwasher back on. First, follow the instructional video to remove the motor (found on this site on the circulation motor page) and chopper assembly (also found on this site on the chopper assembly page). The impeller is screwed onto the input shaft of the motor, and you must keep it from turning so that you can unscrew the impeller assembly. I removed the back cover of the motor (there are four screws holding it on) and held a flat pry bar on the rotating assembly inside the motor to keep it from turning, then unscrewed the impeller from the shaft. Mine came off very easy, but be careful not to let your pry bar slip or damage the motors internals. After that, install the washer and grommet from the impeller seal kit on to the impeller, and screw it back on while keeping the motor from turning with your pry bar. Lastly, reinstall the motor and chopper assembly per the aforementioned instructional videos. The whole thing took around an hour to do, and it is much cheaper than replacing the entire circulation motor.
        • Ashley from EDMOND, OK
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          8193951A, W10083957V
        6 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Surprise, I'm not a plumber - replacing impeller and seal kit 8193951A
        When the top rack stopped cleaning, I tracked down the problem to the food shredder/chopping blade, and then to the impeller that drives the blade. The knob on the impeller had sheared/broken off. That meant removing the motor, and replacing the impeller. Four hours, a band-aid, and a trip to Home Depot later, here are my suggestions

        1. Look for videos – this site is awesome, but they don’t have a video on this particular repair. I found 4 that got me close to knowing what I was doing.
        2. Do all the “remove internal stuff” - you had to anyway to find the issue with the shredder/cutting blade
        3. Take pictures as you move along, you’ll need them when you have to remember the placement of the water line, drainage hose, wired connections etc.
        4. You need a 1/4 inch socket set. A 3/8 drive will NOT work (it won’t fit between the shroud and the base). Don’t start working on the repair, unless you have a 1/4 in socket with about a 6" extension
        5. Someone at Kitchenaid should be shot for having the waterline connection facing the back of the unit. Use a short adjustable wrench
        6. The order comes with a washer, but when you take the impeller off this model, you’ll see you don’t need it.
        7. Placement is everything – there was zero clearance between the bottom of the unit and the floor. Placement of the water line, drain hose, and power line was critical – had to re-position the unit about 7 times to get it to “play nice”.
        8. Hindsight – only needed to remove the wire harness for the motor (take pictures)
        9. Hindsight – gloves are a great idea – sheet metal is unforgiving
        • stephen from REDMOND, WA
        • Difficulty Level:
          A Bit Difficult
        • Total Repair Time:
          More than 2 hours
        • Tools:
          Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
        • Parts Used:
          8193951A
        5 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          2 Reviews
          5.0
          Filter By Rating:
          • 5 Stars
            2
          • 4 Stars
            0
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS12069388
              Manufacturer Part Number: 8193951A
              Brand
              Model Number
              Description
              Kenmore
              665110739120
              Dishwasher
              Kenmore
              665110739130
              Dishwasher
              Kenmore
              665110739140
              Dishwasher
              Kenmore
              665110739190
              Dishwasher
              Kenmore
              66513102K900
              Dishwasher
              Kenmore
              66513102K901
              Dishwasher
              Kenmore
              66513102K902
              Dishwasher
              Kenmore
              66513103K900
              Dishwasher
              Kenmore
              66513103K901
              Dishwasher
              Kenmore
              66513103K902
              Dishwasher
              Kenmore
              66513104K900
              Dishwasher
              Kenmore
              66513104K901
              Dishwasher
              Kenmore
              66513104K902
              Dishwasher
              Kenmore
              66513109K900
              Dishwasher
              Kenmore
              66513109K901
              Dishwasher
              Kenmore
              66513109K902
              Dishwasher
              Kenmore
              66513112K700
              Dishwasher
              Kenmore
              66513112K701
              Dishwasher
              Kenmore
              66513112K702
              Dishwasher
              Kenmore
              66513113K700
              Dishwasher
              Kenmore
              66513113K701
              Dishwasher
              Kenmore
              66513113K702
              Dishwasher
              Kenmore
              66513114K700
              Dishwasher
              Kenmore
              66513114K701
              Dishwasher
              Kenmore
              66513114K702
              Dishwasher
              Kenmore
              66513119K700
              Dishwasher
              Kenmore
              66513119K701
              Dishwasher
              Kenmore
              66513119K702
              Dishwasher
              Kenmore
              66513212K901
              Dishwasher
              Kenmore
              66513212K902
              Dishwasher

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service