Quick Question!

Have you ever purchased from PartSelect.com before?

12069099-1-S-GE-WR55X10942P-Electronic Board
12069099-1-S-GE-WR55X10942P-Electronic Board 12069099-2-S-GE-WR55X10942P-Electronic Board 12069099-3-S-GE-WR55X10942P-Electronic Board https://partselectcom.azureedge.net/Schematics/GE/00125008i08.gif

Electronic Board

Your Price

$255.22
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12069099
Manufacturer Part Number WR55X10942P
Manufactured by GE

This board controls the operation of the unit. Note: This part has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

This part works with the following brands: General Electric, Hotpoint.

This part works with the following products: Refrigerator.

This part fixes the following symptoms:

  • Will Not Start.
  • Freezer section too warm.
  • Fridge too warm.
  • Clicking sound.
  • Noisy.
  • Not dispensing water.
  • Fridge too cold.
  • Ice maker not making ice.
  • Fridge runs too long.
  • Ice maker won’t dispense ice.
  • Freezer not defrosting.
  • Fridge and Freezer are too warm.
  • Freezer too cold.
  • Too warm.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Our freezer section iced up. Took panel off to expose ice on back wall of freezer; when i dialed fridge and freezer controls to zero to defrost, freezer fan continued to run. I unplugged unit and defrosted. I have plugged back in and allowed freezer and fridge to cool. Water in container in freezer is frozen. Fridge temp is 41f. The fan runs continuously, which does not seem proper. Advice?

joe for model number GSL25QGPDBS
Answer:

Hello Joe, thank you for contacting us. That sounds like it would be the temperature sensor. The sensor sends the temperature reading of the refrigerator towards the control board. If your refrigerator or freezer runs too long, is too warm, will not defrost, or has sections that are too cold, replacing this part is the solution. Hope this helps!

Related Parts: Temperature Sensor
4 people found this helpful.
Question:

I have no display and nothing works but the light door switch

Kris for model number PSS26GRB
Answer:

Hi Kris, Sorry to hear the display is not working. It sounds like it may be the control board of the touchpad. To verify what part is causing the issue you can use an Ohms/Multi Meter to check the continuity of the parts. I hope this helps. Have a great day!

2 people found this helpful.
Question:

After power outage due to storm, fridge doesn't work. The lights work but the front panel doesn't light up and the fridge/freezer don't turn on/cool. I replaced the front control panel board but it still has the same issue. Will this motherboard fix the issue?

Shannon for model number HSS25GFTABB
Answer:

Hi Shannon, Thank you for the question. Yes it is common when you have a power outage or serge the main board will need to be replaced. Hope this helps!

2 people found this helpful.
Question:

We are wondering if this would solve our problem. Our refrigerator works fine, but it has a clicking/snapping noise that isn't constant. It will sometimes click/snap, intermittently, for 2-3 hours......stop for a few hours....then start up again, for a few min or hours. There doesn't seem to be a pattern. Even though it isn't a loud sound, we have two little schnauzers that are terrified of it and it is making life very stressful for them & us. Do you have any idea what it might be?I appreciate your help. Thank-you.

Bev for model number GSH25JSXBSS
Answer:

Hi Bev, Thank you for the question. The Electronic Board is known to make a clicking noise when it is becoming defective and needs to be replaced. I recommend replacing the board. Good luck with dogs and the repair!

2 people found this helpful.
Question:

After a power outage, the refrigerator runs constantly. I turn the thermostat down and it continue to run until I reach the zero setting.As soon as I turn the thermostat up, the refrigerator start running. The temperature in the refrigerator is cold. The freezer section works fine

Charles for model number GDL20KCSABS
Answer:

Hi Charles, Thank you for the question. Yes it is common when you have a power outage or serge the main board will need to be replaced, But his sounds like the Capacitor,this part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.Hope this helps!

1 person found this helpful.
Question:

Temp warm in frig and freezer replace all sensor and fan motor and the defrost heater do you think its the control board ? I guess its the last thing to replace

Roger for model number GSS22SGMBBS
Answer:

Hi Roger, Thank you for your question. Have you also checked your thermostats as well? If not, I would suggest checked your thermostats and defrost thermostat first. If all of those parts are just fine, then you may need to replace your board. Good luck with your repair.

1 person found this helpful.
Question:

Freezer cools, fridge doesn’t. I replaced Master bored. Same problem persists. What could it be?

Sherman for model number PDS22MBSBCC
Answer:

Hi Sherman, Thank you for the question. I suggest replacing the Temperature Sensor,Part Number: WR55X10025. Both the freezer and fridge side has its own sensor and may explain why one side works and the other does not.The sensor sends the temperature reading of the refrigerator towards the control board. Hope this helps!

1 person found this helpful.
Question:

The temperature control setting panel is totally blank, all lights are working, water dispenser is working, can you give me a answer to this question?

Keith for model number pfs22sisss ge profile refrig
Answer:

Hi Keith, Thank you for your question. It sounds like you will have to replace your display board. I have linked that part number down below for you. Good luck with your repair.

Related Parts: Display Control Board
1 person found this helpful.
Question:

Is there a way to test if the relay in the mother board that turns on heater defrost is working ? I tested the heater manually by bypassing it it turns on, but how do I know that it's turning on by itself when needed to defrost.

Carlos for model number GSS25SGMBBS
Answer:

Hi Carlos, Thank you for the question. You can test the board by checking for continuity and resistance with a multi meter. Hope this helps!

Question:

Recently had both sides warm up. Found condenser fan motor stuck. Replaced. Operated correctly for 4 days. Now no cooling. Condenser fan not working and compressor not working. Compressor not hot or warm. Is this problem likely to be motherboard or something else. Thanks

Richard for model number ZFSB26DRDSS
Answer:

Hi Richard, Thank you for your inquiry. If there is no cooling in the refrigerator or freezer section there are a few parts that may fix the issue. The parts that may fix this issue are the temperature sensor, the defrost thermostat, the electronic control board, the defrost heater and bracket assembly, the capacitor, the condenser fan motor, the evaporator fan motor, the overload switch or the door gasket. For the electrical parts I would recommend testing them with a multimeter to verify the continuity of each part and to see which one is causing the issue. I hope this helps. Thank you and have a great day!

Question:

The refrigerator side does not get cold enough. It is around 50 and it used to be in the the 32 to 40 range. There is no frost build up on the evaporator. The evaporator fan is running. The damper between the freezer and refrigerator is fully open. Freezer has a temp of -5. There are no obstructions that i can see. Does the evaporator fan speed up and slow down to force more air into the refrigerator side or is it all done with the damper?

Carl for model number DSS25PFMCWW
Answer:

Hi Carl, Thank you for your inquiry. The fan should only run when your compressor is running. It sounds like you might want to check both your defrost thermostat and the temperature sensors inside of your refrigerator section. You can test both of those parts with a multi-meter to check and see if they are working. You can also check your fan physically to see if there is any ice build up stopping the fan from moving, and you can also test your evaporator fan motor with that same multi-meter to see if it is working. Good luck with your repair.

Question:

Hi--the compressor fan motor keeps slowing down causing the compressor to run hot. When the rpm's go down it squeals like a bad bearing but at full voltage no noise any ideas?

David for model number GSS25WGPJBB
Answer:

Hi David, Thank you for your inquiry. It sounds like you may need to replace your compressor fan motor if it is giving you trouble like that. The only other part that you may want to check would be your electronic board. Good luck with your repair.

Most Recent

Question:

Have GE side by side freezer/frig. After installing your mother board it unit again warmed up after 5 days both sides with frost on back of freezer. Compressor & evaporator fan working. Which part do i now need. Thank you

Dean for model number GSL25KGRBBS
Answer:

Hi Dean, Thank you for your question. It sounds like you will want to check your defrost heater and your defrost thermostat to see if they are working correctly. You could test both of these parts with a multi meter meter to be sure. I hope that helps. Good luck with your repair.

Question:

Refrigerator does not turn on only the two light bulbs are on when open the fridge. Power is at compressor but nothing comes on and no light on the board inside the fridge. What could be the problem?

Tony for model number PDS20SBSBLSS
Answer:

Hi Tony, Thank you for your question. I would suggest testing your run capacitor and your overload switch first. If both of those parts are fine you may have to replace your electronic control board. I hope that helps. Good luck with you repair.

Question:

I have no light in the panel board where shows the temperature install new board will this take care of such?

Linton for model number PDS20SBSBLSS
Answer:

Hi Linton, Thank you for your question. It should be this part that would fix that issue. I hope this helps. Good luck with your repair.

Question:

I had the board replaced and a new ice maker installed. Ice maker gets too much water.

Ray for model number GSH25SGPCSS
Answer:

Hi Ray, Thank you for the question. If the ice maker is over filling this normally indicates the Dual Inlet Water Valve needs to be replaced. Hope this helps!

Related Parts: Dual Inlet Water Valve
Question:

My fridge has stopped working, the compressor and fan do not kick on. Things i've tried already: I've shaken the relay, no rattling sounds. Tested the wires that come from the starter relay, no voltage. Tested the 3 compressor prongs that are on the motherboard and i have power to all of them. No power from fan wires when i tested them. Could this be a motherboard issue?

Tim for model number GSL25JFPABS
Answer:

Hi Tim, Thank you for your question. It does sound like it could be your control board that is the issue. You may also want to test the thermistors in your appliance as well. It could be that they are not working and so your compressor does not know that it should be turning on. I hope that helps. Good luck with your repair.

Question:

Nothing on the fridge works including the display on the ice maker, compressor, fan but the inside lights lite up.

Alan for model number gsh25jstass
Answer:

Hi Alan, Thank you for the question. This sounds like there is an issue with the Electronic Board,This board controls the operation of the unit.Hope this helps!

Question:

Our ice dispenser and water dispenser stopped working and there is a clicking sound i unplugged the wires from the board can it stay unplugged until the new board is installed

Robert
Answer:

Hi Robert, Thank you for your inquiry. You should be able to leave the board unplugged until until the new one is plugged in. Please also refer to your owners manual for further instructions. I hope this helps. Thank you and have a great day!

Question:

Me GE refrigerator is stuck in show room mode after a power outage. As instructed i have in unplugged the unit and plugged it back in several times for as much as an hour. Do i have a bad mother board?

Thompson for model number gsc23ksta ss
Answer:

Hi Thompson, Thank you for your inquiry. The electronic control board fixes the issue the majority of the time, but there are some other parts that you will need to check to see which one is causing the issue. You will need to check the capacitor, the evaporator fan motor, the overload/start relay, the temperature sensor, the recess door spring, the dc condenser fan motor, the dispenser solenoid assembly, the water filter, the defrost heater and bracket assembly, the power cord and the ice maker. I hope this helps. Thank you and have a great day!

Question:

My appliance continues to dispense water or ice unless i have the lock button turned on. What is my problem?

Scott for model number PSC23MSWASS
Answer:

Hi Scott, Thank you for your question. I would suggest testing your door dispenser solenoid, you should also test your ice maker as well. If both of those parts are checking out fine, it may be your board that is the issue. Good luck with your repair.

Question:

Temp warm in both frig and freezer. Had service out. The compressor, fan and starter relay working. Pulled of panel to check evaporator coils. There was frost on both ends, but not in the middle. They think i need a new compressor. What's your opinion. Not looking to spend $600 to have this done..

Jim for model number PFS22SISBSS
Answer:

Hi Jim, Thank you for your inquiry. I would actually suggest taking a look at all of the temperature sensors inside your fridge and freezer. It could be that you need a new compressor, however you may actually need a new electronic control board. Unfortunately testing that part is difficult. You may have to have your technician come in and test that part or speak with your manufacturer. Sometimes they will have a list of how to troubleshoot parts like your electronic control board. I hope that helps. Good luck with your repair.

Question:

My refrigerator is no longer outputing cold air in both the freezer and the refrigerator. The light comes on(so there is power), but the led that's at the top no longer has power.....i'm thinking it's the mother board??? i did turn off the circuit for a minute then turned it back on with no luck....

shawn miller for model number PSS26SGRB SS
Answer:

Hi Shawn, Thank you for your inquiry. There are a few parts that may be causing this issue. The parts you will need to check are the temperature sensor, the defrost thermostat, the electronic control board, the capacitor kit, the dc condenser fan motor and the evaporator fan motor. I hope this helps. Thank you and have a great day!

Question:

Hi. My evaporator froze causing warm air. Found the heating element was damaged and changed it, also changed the defroster sensor and the thermostat sensor. Evaporator still freezing. Is there anything else that has to be changed ? Besides the mother board ? Thanks.

Martin for model number GSS25SGRFSS
Answer:

Hi Martin, Thank you for your inquiry. If the refrigerator section is too warm and you have already replaced the heating element, the defrost sensor and the defrost heater I would recommend trying to replace the evaporator fan motor. You may also wish to check the condenser fan motor as well. I hope this helps. Thank you and have a great day!

Question:

Is the electric board compatible with both model wr55x10942 and gss25pgmf??

Tracy for model number WR55X10942
Answer:

Hello Tracy, Thank you for your question. The board with GE part number WR55X10942 was replaced by the manufacturer with GE part number WR55X10942P or PartSelect.com catalog number PS12069099. This is listed as the correct board for model number GSS25PGMF. I hope this is helpful!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 144 reviews What's this?
 

4 of 7 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Trudy from Saint Cloud, FL

Refrigerator would not get cold

UNPLUG! (Read Instructions for wiring configuration) Remove cover lower back right hand side.Remove ribbon plugs top and bottom you will need to lever back holding tab while pulling plug they will more than likely break dont worry you are throwing this part away., disconnect ground wire, compress plastic holding tabs,
pull off control board, plug in new board push on to holding tabs reconnect ground and turn on refrigerator and check replace cover, everything is now working great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Glenn from PORT JEFFERSON, NY

Ghostly sounds from fan motor - variable speeds all night - motherboard problem

Simple directions were provided. It took more to clean and vaccuum than the actual repair. Yes I replaced the motherboard in a referigerator. Just keep not of the connectors and were they came off from on the original board. Dont just rip them off because the new board has some different connections. So follow the directions and take your time if your not sure. But really it a cinch. No more whoooo sheeesh and howling noises from the referigerator. Thank goodness.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Terry from The Villages, FL

Refridgerator was not cooling

First, I removed the cover plate from behind the fridge. Next, I carefully pulled the main board out (four little clips holding it in) and disconnected the plug in wires. I connected the wires to the new board, popped it back in place and replaced the cover. Very easy to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: james from vista, CA

Making an owl sound from the icemaker side

Simple; Removed the panel, unplugged the cable connections to the mother board with a rat nosed plier.
Then to remove board you must squeeze closed the 4 plastic retainer clips in each corner, or they can accidentally be pulled off with the board.
Removed the board, re-attached the new board on the clips, then the cable connectors, then the panel.
Plugged in the refrige and it has been silent ever since.
Follow the instructions and anyone can do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Richard from Clarksville, GA

Electric surge from lightening strike close to house

Obvious that main electronic board was fried. Refrigerator and freezer both not working although fan was running. Replaced main board and run capacitor. Compressor not running. Pulled starter relay and checked compressor connections for continuity. Checked ok. Ordered starter relay and installed with new capacitor. Compressor started and has been running quiet and cold ever since. Thanks to videos on partsselect website for offering the confidence to try the fix myself. Total spent on parts and shipping,$350. I had electric provider install surge protection behind meter for a cost of $5.70 a month. Hope it works as advertised.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Christopher from Chicago, IL

Temp panel flashed "hrs", refrigerator would not work

Remove back panel to expose the control board. Simply unplug cables from old board and pull the board out, no tools required. Put new board in place and replace the cables. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: john from Madison, OH

Lost temperature in refrigerator and freezer, making clicking noise

Removed main control board cover on back of refrigerator (3 screws). Unplugged power to refrigerator and removed electrical connections to control board using a screwdriver. Using a screwdriver disconnected (4) plastic self -locking prongs holding the board. Matched new replacement board with old board. Plugged in electrical connections to new board. Snapped main control board onto (4) self- locking prongs. Reinstalled cover (3) screws. Plugged in refrigerator and tested refrigerator operation.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Greg from Damon, TX

Fan was not running to circulate the air; found resistors burned on main board

Removed the board cover from the back, removed old board, installed new board, installed cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Sonya from Sugar Land, TX

No water from dispenser, then constant clicking sound, and frig went warm

After reading this forum and other searches, I assumed replacing the board may solve my problem. Unscrewed the back plate, used pliers to pull out the connectors, squeezed in the sides of the 4 plastic white board holders to release the board, and then replaced old board with the new one and reconnected connectors. (My model was not one of the mentioned models for cutting the 2nd pin of the J1 connector, so I left it in.) Upon plugging my frig back in, it began working perfectly again. So thankful to have found this forum!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Joseph from Marrero, LA

Main board failed

Part arrived 2 days before anticipated. I was able to keep my fridge running long enough to get the new part in, which took no time at all. The Main Board relay would start clicking and the compressor would shut down. By unplugging the top right plug for a minute and plugging it back in I was able to keep it running for a few hours at a time. Good enough to keep my food from going bad. Thr part was an easy plug in replacement, was a good price, and works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Allen from Smithland, KY

Refigerator quit running

Removed back cover from unit. unpluged wirring harness installed new control board and refigerator runs lik new

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Gary from Liberty, MO

My refrigerator/freezer had several problems; both frig and freezer wasn't cooler properly, some days everything froze. The ice maker stopped making ice and water was leaking in the freezer.

I first called a GE repairperson. The diagnose the problem and told me the main control board was shot and the double outlet water valve needed replaced. The estimate for both parts and repairs was $850.00. I thought the estimate was high so I did some research on-line and discovered I could purchase the parts myself. When I researched the part, a short video popped up explaining how to install the part. I watched both video's and did exactly what the guy in the video said and was able to repair my refrigerator/freezer myself. The total cost for both parts was $200.00, I save $650!!! Amazing. I ordered the part on Saturday, and was told it would take a week to 10 days to receive the part and the part showed up on my door steep the following Tuesday. I'll never call a repairmen first again. I'll research the issue through partselect.com and try to fix the problem myself. I am not technologically or mechanically sauvy and have spent thousands on repair bills in the past, no more will I do that.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 6 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Pliers, Socket set
Customer: Joseph C from Oklahoma City, OK

No water - light dimming - etc.

Moved refrig away from wall and unpluged electric cord. Removed cover from control board. Removed connector plugs from control board. Removed old control board and replaced it with new control. Replaced connectors and cover. Pluged electric cord into wall socket. Operation, OK.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Edsel from Haynesville, LA

Replace main control board

Unplug the refrigerator from the wall plug and take the plate off of the circuit board in the back of the refrigerator. Remove the screws holding the board in place. Remove the board by pinching the little white pins holding the board inplace. Disconnect the wires from the circuit board and install the new board in its place. Notice the wire prongs so that they are connected the same as they were on the previous board. Replace the screws that hold the cover. Plug it in. If it does not turn on, remove the plug from the wall and re insert it. The new board has to reset itself.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Electronic Board
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: hani from paris, TX

Fridge to warm very in temp

I replaced the display board by accident to find out that there is a big board in the rear of the unit. Order and replaced it well not fixed and still doing the same thing. three hundred dollars later and i am ready to push it out the door and get a old school fridge without all the electronic bs. at least they work and last. what a concept.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS12069099
Manufacturer Part Number: WR55X10942P
Brand Model Number Description
General ElectricA4425GDTABBRefrigerator
General ElectricA4425GDTAWWRefrigerator
General ElectricA4425GDTBBBRefrigerator
General ElectricA4425GDTBWWRefrigerator
General ElectricBSS25GFPACCRefrigerator
General ElectricBSS25GFPAWWRefrigerator
General ElectricBSS25GFPCCCRefrigerator
General ElectricBSS25GFPCWWRefrigerator
General ElectricBSS25GFPDCCRefrigerator
General ElectricBSS25GFPDWWRefrigerator
General ElectricBSS25GFPECCRefrigerator
General ElectricBSS25GFPEWWRefrigerator
General ElectricBSS25GFPHCCRefrigerator
General ElectricBSS25GFPHWWRefrigerator
General ElectricBSS25JFRFWWRefrigerator
General ElectricBSS25JFRJWWRefrigerator
General ElectricBSS25JFTAWWRefrigerator
General ElectricBSS25JFTBWWRefrigerator - T Series
General ElectricBSS25JFTCWWRefrigerator - T Series
General ElectricBSS25JFTDWWRefrigerator
General ElectricBSS25JFTEWWRefrigerator - T Series
General ElectricBSS25JFTGWWRefrigerator
General ElectricBSS25JFTHWWRefrigerator
General ElectricBSS25JFTIWWRefrigerator
General ElectricBSS25JFTJWWRefrigerator
General ElectricBSS25JFTNWWRefrigerator
General ElectricBSS25JSRFSSRefrigerator
General ElectricBSS25JSRJSSRefrigerator
General ElectricBSS25JSTASSRefrigerator
General ElectricBSS25JSTBSSRefrigerator - T Series