Spark Module

Hi Brad, Thank you for the question. The the model number provided the spark module is located under the main cooktop. The grates and burners will need to removed so you can lift the top and access the spark module. Hope this helps!

Hello Charles, thank you for your question. If the back burners light, but the front will not you will want to replace the Spark Module 5304508269. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello James, thank you for your question. The wires come in a kit. The Igniter wire harness Part Number 316580602 would include all the wires you would need to replace. Please enter the part number into the site for current price and availability. Good luck with your repair!

Hello Frank, Thank you for the question. The Spark Module is located under the cooktop. The grates and burners will need to removed so you can lift the top and access the spark module. Hope this helps!

Hi Wirt, thank you for the question. The spark module is located under the main top. First, you will need to lift the burners and caps. Pull all the control knobs. Then remove the front panel screws and slide the main top forward and lift it off the hinge. You can then see the control module. We hope this helps, good luck with this repair.

Hi Walter, thank you for your question! According to our research on your model, the issue is probably related to the Range Surface Burner Igniter, part number FIX2368573. The range surface burner igniter includes the orifice holder that directs the gas flow to the burner head and the igniter electrode that produces the spark that ignites the gas. If that does not take care of the issue, we would suggest checking the Spark Module, part number FIX11775689. We hope this information is useful.

Hello Amanda, thank you for the question. We looked into your model and discovered that the problem could be with the gas valves: the burner gas valves, part numbers PS2359012 and PS2359013, are for the right-side burners, while the burner gas valves, part numbers PS2359011 and PS2359009, are for the left-side burners. If these parts are fine, you may need to replace the oven gas valve, part number PS1150314, as it may not release the full pressure of the gas. Before replacing any part, we suggest cleaning the burner holes so no blockage of gas occurs during igniting. We hope that helps!

Hello Tammie, thank you for your question. The spark module is located at the back of the unit behind the back panel. Once the back panel is removed the spark module should be found with wires attached into it from the burner heads. I hope this helps!

Hi Robert, Thank you for your question. On most ranges, there is a panel that spans the width of your range on the back side of the appliance right underneath the control panel area. You would have to unscrew that panel to reveal the spark module. I hope that helps. Good luck with your repair!

Hello Zhenya, thank you for your question. Yes, that sounds like a spark module issue. We would recommend replacing that part and if the issue persists, the problem would be with the ignition switch harness PartSelect Number PS3409150. I hope this helps!