Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Eduardo J - February 5, 2024
Verified Purchase
Great replacement
It was exactly what I needed and it was easy to install took less than 15 minutes
★★★★★
★★★★★
Carol C - May 19, 2023
Verified Purchase
Perfect
Part was easy to exchange in the washer
Worked perfect first time
★★★★★
★★★★★
Pamela L - February 3, 2023
Verified Purchase
Easy repair
Came in few days was easy to install.
★★★★★
★★★★★
Jaclyn F - January 30, 2023
Verified Purchase
Easy Repair, Great Help
We had to replace this part after a cold snap caused some freezing and cracked the blue valve. The site made it so easy to identify which part needed through diagrams and then had an incredible how-to video on completing the repair. Turned a full washer replacement/application service repair into a maybe 1 hour fix that was easily done by myself and partner.
★★★★★
★★★★★
Donald C - January 27, 2023
Verified Purchase
Easy repair. The part works great.
Delivery was fast and the part was in perfect condition.
★★★★★
★★★★★
Robert C - September 11, 2022
Verified Purchase
Easy repair
Part work Ed great.
★★★★★
★★★★★
Roger D - July 25, 2022
Verified Purchase
Easy Repair after watching YouTube Video for Maytag TopLoad Washer
I received the part faster than expected using economy FEDEX shipping. The received part was the exact replacement for the part removed from my machine. The following YouTube Video https://www.youtube.com/watch?v=KhfYI9IRVRA made repair very easy. My old part measured 1450 ohms not the 800 to 1300 ohms coil resistance. The new part fixed my failure to completely fill with hot water and then go into Wash Cycle. I think the hot water raised the coil resistance above 1450 ohms and then stopped operating. The cold water side did fill but the cold resistance probably did not increase. Very happy with new part and speed of delivery.
★★★★★
★★★★★
Daniel W - June 6, 2022
Verified Purchase
Great part
Came on time and easy to install but check hose at wall for screen first didn’t know hose had a screen in it had checked at machine
★★★★★
★★★★★
Donald R - March 18, 2022
Verified Purchase
Easy
Easy fix recieved part fast
★★★★★
★★★★★
Ryan L - March 21, 2021
Verified Purchase
Very easy install
Part came quickly and in good condition!!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The washer kept filling with water during the cycles
Unplug the washer. Turn of the water. Remove the hoses. using a 1/4 inch nut driver, remove the screws from the back panel. Remove the console by inserting a putty knife between the console and the top until you hear the click. Unplug the harness for the inlet valve. remove the two screws holding the inlet va
... Read morelve and then remove the inlet valve. Replace with new inlet valve and affix with the two screws. Plug in the electrical harness. Place Console back into position. Place back panel into position and tighten screws with nut driver. Put the hoses back on the inlets. turn the water back on. plug in the washer.
Read less
Latchmin from DORAL, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Sensor was not changing it would go back to wash from rinse
Ordered the part for the 500 series Kenmore washer open the top switch the two parts out and reconnected the new part replace the covers they only thing is cold is hot and the hot is cold even with it connect correct I just put on opposite settings and go with it
Loraine H from ALBEMARLE, NC
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water valve leaking water nonstop
easy install 30-45min and a reset and it was done.
Philip from SAN ANTONIO, TX
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water would not stop flowing.
*be sure to turn water off, unplug machine, and unscrew the water hoses from the rear of the washer. 1. Removed screws from the back of the washer, just the top part where the controls are. 2. Removed the panel. 3. Use a putty knife or screw driver to pop off the top panel. 4. Remove the screws from the inlet valve.<
... Read morebr />5. Unplug the wires connecting the inlet valve to the washer. 6. Lift out the old inlet valve. 7. Replace with the new inlet valve. 8. Plug the new wires into the washer. 9. Replace the screws in the inlet valve. 10. Replace the top. 11. Replace the rear panel and screws. 12. Reconnect the water hoses, careful not to mix the hot and cold. 13. Plug the machine back in and you're finished!
Replaced the mixer valve . It was a few screws, and an instruction video from YouTube.
jonathan from JOHNSTOWN, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
DIANN
January 18, 2018
The plastic part on the cold water inlet valve broke. The hot and cold are on oposite ends. Do i need the whole part?
Hello Diann, Thank you for your inquiry. Yes, you would need to replace the entire valve. Hope this helps!
13 people found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
June 21, 2019
Washer works fine but water continues to drip in the washer when turned off. I have to shut the main supply off. Is this a bad water inlet valve?
For model number MVWC565FW0
Hi Jeffrey,
Thank you for your question. Yes, if you have water leaking into the tub when it is not in use, the issue would be the water inlet valve. A component in the valve has failed and it will need to be replaced. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Leilani
February 25, 2019
After i have loaded the washer and pushed the start button, the sensor light comes on, but water does not start filling the tub. I was told that this was because of the water input valve. Is this correct?
For model number NTW4605EW0
Hi Leilani, thank you for your question. Usually it is however you could test your valve with a multi meter to make sure it is working correctly. If it is then you may want to also take a look at your water level pressure switch as well. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Chuck
June 28, 2021
The water keeps running without filling the washer. What should I look for to verify the faulty part?
For model number NTW4605EW0
Hello Chuck, Thank you for the question. We suggest testing the Water Valve. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
April 24, 2019
Mine (2015) had a water valve w10701459 in it. What replaces this water valve?
For model number NTW4605EW0
Hello Eric, thank you for inquiring. The correct replacement Water Inlet Valve for your model is part PS11773194.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kevin
December 9, 2019
My washer won't fill.
Hello Kevin, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
Was this helpful?
Thank you for voting!
Joseph
June 17, 2021
Water Inlet Valve, can only get cold water from all wash cycles, hot not working, at this time reason unknown, will the part work?
For model number MVWC565FW1
Hello Joseph, Thank you for the question. Yes, if the Hot Water is turned on and running from the water supply but the appliance will not fill with hot water, the Water Inlet Valve should be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Kostya
November 27, 2019
The clothes in the washer are half-dry and have stains all over them. Seems like some clothes have never been washed at all. Could it be that the inlet washer valve is bad so that it doesn't allow water in?
For model number MVWC565FW0
Hello Kostya, Thank you for the question. I suggest testing the valve with a multi meter to check for continuity. Hope this helps!
Was this helpful?
Thank you for voting!
Beth
May 16, 2019
My washer doesn’t leak but the cold water doesn’t flow. Will buying this part fix my problem?
For model number Ntw4605ew0
Hello Beth, thank you for inquiring. For this symptom you will want to replace either the Water Inlet Valve part PS11773194, the Cycle Switch part PS11754440, or the electronic Control Board part PS12114291. We hope this helps.
Was this helpful?
Thank you for voting!
Linda
June 21, 2022
L'eau froide ne rentre plus dans la cuve, est ce que je doit changer la valce au complet
For model number MVWC565FW
Bonjour Linda, Merci pour la question. Si la valve ne s'ouvre pas et ne distribue pas d'eau dans la baignoire, la valve peut devoir être remplacée. La vanne peut également être testée. Réglez votre multitesteur sur l'échelle de résistance ohmique X 1. Placez chacune des sondes du multimètre sur une borne. Étant donné que la lecture peut varier d'une marque à l'autre et d'un modèle à l'autre, vous ne devriez recevoir aucune lecture. Cependant, si votre test produit une lecture à l'infini, le solénoïde est défectueux et la vanne d'eau doit être remplacée. Si vous avez besoin d'aide pour passer une commande, le service client est ouvert 7 jours sur 7. N'hésitez pas à nous appeler. Nous avons hâte d'avoir de tes nouvelles!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
