Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
August 12, 2019
Do you have to remove the wall oven to replace this part?
For model number CT9050SH1SS
Hi Mike, thank you for your question. You may have to however you should only need to remove your control panel to get to the area behind it where this board is. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Erin
November 9, 2022
After running a clean cycle in the oven, neither the bake nor broiled heating elements would work. We reset the breaker.
For model number PT9050SF1SS
Hello Erin, thank you for contacting us. The most probable cause of the issue is a blown high-limit switch, part number PS2370052. We would also recommend testing the bake and broil elements for continuity using a multimeter. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Not sure which part is needed to fix code F20. The oven is not over heating it just keeps putting up code F 20 and shuts off. could this be the control board or oven sensor . Thanks for your time. Oh by the way it doesn't matter weather the oven is on or broil is on.
For model number PT9050SF1SS
Hi Jerry, thank you for your inquiry. Error code F20 is an oven temperature fault. It means the main control module is not getting the proper feedback from the temperature sensor. To solve this issue, you may first need to check the wiring between the temperature sensor and the control board. If that is not causing the issue, then you may need to test the temperature sensor, part number PS8754411. If this part is faulty, you may need to replace it. We hope this sorts out your problem!
Oven is not reaching temperature and also light switches on and doesn’t switch off. It can’t get hot enough to get out of preset mode.
For model number PT7050EH9ES
Hello Matthew, thank you for getting in touch. We have concluded that the issue is most probably with the control board, part number PS11771853. You may need to check it to solve the problem. Glad to be of assistance!
Was this helpful?
Thank you for voting!
Dave
June 24, 2024
F34 error code is on-oven will not start-locked up
For model number PT9050SF1SS
Hi Dave, thank you for reaching out. F34 error code means that the oven cooling fan is not running correctly. We would suggest checking it to fix the issue, the part number is PS8754491. We hope this solves your problem!
Oven is reading an f60 code. would I need the Board Machine Control or the Control Board and Overlay?
For model number WB27x29602
Hi Timothy, thank you for reaching out. Our research shows that an f60 error code means that there is an issue with the interface and touch pad. The CONTROL BOARD AND OVERLAY Assembly part number PS12295192 will resolve this issue. We hope this helps.
