Quick Question!

Have you ever purchased from PartSelect.com before?

11770483-1-S-Frigidaire-5304506516-SPRAY ARM
11770483-1-S-Frigidaire-5304506516-SPRAY ARM 11770483-2-S-Frigidaire-5304506516-SPRAY ARM 11770483-3-S-Frigidaire-5304506516-SPRAY ARM https://partselectcom.azureedge.net/Schematics/Frigidaire/AU3P2D7I.gif

SPRAY ARM

Your Price

$18.41
Order within the next 1 hr and 35 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11770483
Manufacturer Part Number 5304506516
Manufactured by Frigidaire

This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwasher. No tools are required for this repair, simple remove the rack stops and upper dish rack, then disassemble the mount and spray arm before installing the new one.

This part works with the following brands: Frigidaire, Crosley, Kenmore, Kelvinator.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Not drying dishes properly.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Hi, i can’t find part # 1544681. This is the upper arm spray part of my dishwasher. Where can i find this part so that i can replace it? Thank you, joy

Joy
Answer:

Hi Joy, Thank you for your question. If you are looking for the upper spray arm on your appliance, this would be the correct part. Good luck with your repair.

Related Parts: SPRAY ARM
1 person found this helpful.
Question:

Can I order just the replacement "nut" for the upper spray arm? That is the only part I need to replace.

Matt for model number FDB4315LFC0
Answer:

Hi Matt, Thank you for the question. Very sorry but the nut is only sold as part of the spray arm. Hope this helps!

1 person found this helpful.
Question:

Should my dishwasher completely drain when the wash cycle has finished? I notice about a 1/4 of an inch of standing water in the bottom of the tub after each washing cycle.

Matt for model number FDB4315LFC0
Answer:

Hi Matt, Thank you for the question. Yes, the appliance should drain completely. Sounds like the drain pump, PartSelect Number PS1765174 will need to be replaced. Hope this helps!

Related Parts: Drain Pump
1 person found this helpful.
Question:

My soap dispenser opens but the soap is still is encased in the plastic and has not gone through the cycle. What is causing this? Is it the upper or lower arm not distributing water to reach the soap? Thanks for your help

Cindy for model number BGHD2433KF1
Answer:

Hi Cindy, Thank you for your question. Well it could be your spray arm. I would suggest checking your water pressure. Sometimes if it is too low, the machine will not wash correctly and the water will not push the detergent out. Or you could check to see if there are any blockages over your spray arm holes or inside your spray arm. It sounds like your issue might be that the water is not coming out fast enough. If you are still having that problem after checking for blockages, I would suggest checking your detergent dispenser to see if it is working. If that is working then you may need to replace your spray arms. Good luck with your repair.

Most Recent

Question:

I have a question about the spray arm part #5304506516 on installing it. How tight should the nut be tightened? I removed mine to check it and it has a hole in the seam in the center. I tried to remember how tight it was on there. I don't want to over tighten it so I strip the threads. I notice when i get it to a certain point it stops, i think the threads bottom out in the nut. My question is this, is that the correct tightness? I can go a little tighter but i don't want to damage the threads on the delivery tube or the spray arm nut. Thanks, Kevin

Kevin for model number FGBD2435NB0A
Answer:

Hi Kevin, Thank you for the question. Watching the video it doesn't look like he tightened it to much after it came to a natural stop. Here is a link to the video. Hope this helps! https://www.youtube.com/watch?v=OWFBZZEFB3E

Question:

Bottom sprayer has the circle sprayer, the sprayer is not effective, was not cleaning. I took entire assembly out, including screen. Was a lot of funk down in there. I put assembly back together, dishes came out cleaner, but the assembly was in a pile, i missed something in putting assembly back together, help. Dishes were better but not completely clean, help!!

kay for model number FGHD2465NF1A
Answer:

Hi Kay, Thank you for your inquiry. There is a video on our website that you can reference on how to install the spray arm to see what you are missing. You will find the video under part number PS11770483. If the dishwasher is still not cleaning once you figure out what part is missing, There are some other parts that you will need to check to see which one is causing the issue. You will need to check the upper rack assembly, the the delivery tube gasket, the water inlet valve, the spray arm support, and the water delivery tube grommet. I hope this helps. Thank you and have a great day!

Question:

I can't find part 1544679 upper spray arm. What part can I use?

Delois Tucker for model number FFFBD2406NB7B
Answer:

Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11770483. Good luck with the repair!

Question:

Just received this part as a replacement for 154478202, but the diameter of the replacement is approx. 1/32" smaller than the original and will not fit the threaded nipple of the supply tube. Does the supply tube have to be replaced with the sprayer arm?

Joseph for model number FDBB4365FS0
Answer:

Hi Joseph, Thank you for your question. You should not need to replace any of your other parts for this part to fit. We have an installation video that might clear some things up with the installation process: https://youtu.be/OWFBZZEFB3E . I hope that helps. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 80 reviews What's this?
1-15 of 80
 

733 of 741 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Roy from Worcester, MA

The spray arm would fall off during the washing cycle.

Repair was simple. I unscrewed the old grommet which held the old spray arm and screwed-on the new one. About 30 seconds was required. Other people having this problem should note that the spray-arm is made of three pieces which are inseparable when the arm is new. The arm is sold in this form. However, when your machine is having the problem that the arm falls off, the three pieces become separate. When you want to replace the spray arm, only one new part needs to be ordered because this part encompases all three components.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

81 of 93 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Mary from Alexandria, VA

Upper spray arm had been "blowing off" during wash cycle.

Unscrewed retaining ring, replaced unit = piece of cake

Help other customers find the most helpful instructions.

Were these instructions helpful?   

44 of 45 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from Hillsdale, NJ

Upper spray arm retainer nut failed

simple repair..woke up one morning and after the dishwasher cycled, I noticed the upper spray arm laying on the top tray.
ordered new one from site, was delivered with-in 2 days ( with standard shipping) all 1 piece, took seriously 5 seconds to unscrew by hand and replace!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 18 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Bob from YONKERS, NY

Broken upper sprayer

Unscrewed upper sprayer by hand, screwed new one in by hand. Piece of cake!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 18 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Doris from Arkadelphia, AR

Loose spray arm

Unscrewed the old spray arm and replace with the new spray arm.

The best part was in the ordering process. Having the diagrams with the parts let me see that I was ordering the correct part. Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

14 of 14 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ronald from Montgomery, TX

Upper wash arm bushing had worn

Discovered upper wash arm had come off. It looked like it was repairable, but the bushing/clip holding the arm came off after one wash. Looked on line and reviewed part and saw it was a one piece assembly from photos. Removed old assembly by unscrewing from top of washer and screwed new assembly in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

17 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kurt from Corrales, NM

Parts fall off the frigidare products in my house.

The parts above fell off or broke and were not covererd under warratee. I called you guys, the parts came in a few days and I snapped them on. Your service was very good.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 15 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JESSICA from CLARKSVILLE, TN

Upper arm kept coming off and leaking at bottom of dishwasher

unscrewed the old upper arm spray nut off and rescrewed the new one on....very easy...then I took the old gasket out of the bottom of the door and replaced by sliding it in. very simple....less then 15 minutes for both and have solved my issues.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 13 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: mike from Bartlett, IL

Spray arm came off in wash cycle

The spray arm comes off into 3 parts but is really only supposed to be one. I removed the nut from the old assembly and attempted to place the new assembly on by hand. The new nut seemed to be slightly smaller than the original so it would not attach to the dishwasher. Using a kitchen knife, I removed the new nut from the arm unit and attached the new arm to the original nut and it went back on easily. The connection of the new arm to the new nut was 3 tabs that needed to be depressed with the knife and was a different conection method than the assembly that kept coming off in the wash cycle. The replacement part had a much better design than the original.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

11 of 13 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Macclenny, FL

Top spray arm separates from mount

unscrewed old spray arm, installed new arm. Took less than 30 seconds.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

9 of 10 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Dan from San Jose, CA

Arm-control fell off

I unscrewed and removed the old Arm-Control fixture. I had a little (very little) trouble figuring out how to fit the gasket. It didn't go on like i thought it should. There was no gasket on the original fixture. So I put it on the way I thought it should go. I then screwed the new Arm-Control fixture on to the outlet. That was it. No tools required.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 7 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Sharon from Clinton Township, MI

Upper spray arm fell/broke off

I researched the problem we had with our dishwasher and found the Parts Select website. My husband and I figured out how to remove the broken part and I selected and purchased the replacement.

The part was shipped quickly and when it arrived I changed the broken part with the replacement in less than five minutes. It seems to be working just fine.

I have added Parts Select to our "favorites" in case we have problems with any of our other appliances. Thanks Parts Select. :)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Jason from Hillsborough, NJ

Leaky dishwasher and broken spray arm

Upper spray are assembly simply screws onto the threaded fitting of the inside ceiling of the dishwasher.

The bottom door gasket simply slides in place. both were done in less than 5 minutes. Be careful the gasket only goes in one way. But it is obvious what way it goes in.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 8 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Randall from Mather, CA

Arm upper spray unit fell off

Easiest repair ever. Part came quickly & came fully assembled. Just screwed the part on by hand and it has worked like new ever since. The original part is 3 separate pieces but the new part was all in one & fit perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 9 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JOHN from LA QUINTA, CA

Found spray arm on the rack

found spray arm on the rack looked at the top of rack saw a nut screw the nut looked at the clip found the ears broke off easy r&r.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 80

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11770483
Manufacturer Part Number: 5304506516
Brand Model Number Description
Kenmore58714022200ADishwasher - DISHWASHER
Kenmore58714023200ADishwasher - DISHWASHER
Kenmore58714024200ADishwasher - DISHWASHER
Kenmore58714028200ADishwasher - DISHWASHER
Kenmore58714029200ADishwasher - DISHWASHER
Kenmore58715202800Dishwasher
Kenmore58715202801Dishwasher
Kenmore58715202802Dishwasher
Kenmore58715202803ADishwasher
Kenmore58715203800Dishwasher
Kenmore58715203801Dishwasher
Kenmore58715203802Dishwasher
Kenmore58715203803ADishwasher
Kenmore58715212900Dishwasher
Kenmore58715213900Dishwasher
Kenmore58715214900Dishwasher
Kenmore58715219900Dishwasher
Kenmore58715262900Dishwasher
Kenmore58715262900ADishwasher - DISHWASHER
Kenmore58715263900Dishwasher
Kenmore58715263900ADishwasher - DISHWASHER
Kenmore58715264900Dishwasher
Kenmore58715264900ADishwasher - DISHWASHER
Kenmore58715269900Dishwasher
Kenmore58715269900ADishwasher - DISHWASHER
Kenmore58715282900Dishwasher
Kenmore58715283900Dishwasher
Kenmore58715284900Dishwasher
Kenmore58715289900Dishwasher
Kenmore58715313000ADishwasher