This pump and motor assembly is for dishwashers.
Pump and motor assembly pumps water through the spray arms during the dishwashing cycle.
Shut off the house circuit breaker for the dishwasher before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore.
Part# W11025157 replaces these:
W10837401, W11184516
Customer Repair Stories
Average Repair Rating: 2.6 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water wouldn’t circulate
-Unplugged the dishwasher. -Removed dish racks, filters and spray arms. -removed drain pump and drain lines. -unplugged turbidity sensor and power connectors. -unlocked the 3 locking connectors, removed the pump and motor assembly. - cleaned every component with soap and water. - applied rinse aid to the mot
... Read moreor and pump assembly gasket. -placed pump and motor assembly into the correct position and had a helper hold the assembly down while I locked in the connectors. -work backwards.
Read less
Jacob from SAINT AMANT, LA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher filled and emptied water, but would not spray water around during cycle.
Husband is wonderful, tipped dishwasher over on back, disconnected hoses, and drain motor (replaced that a couple years ago), popped out old part, popped in new part. Had me help him keep door open when working from the inside, and flip a plastic holder piece into place on outside. 15 minutes later, I had a dishwasher that worked like ne
... Read morew again.
Read less
Savannah from DASSEL, MN
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dishwasher would not spray water. It would pump water out and fill just not spray.
I followed the instructions on the Whirlpool site for my model and part (pump and motor assembly). It was a bit hard to get the original assembly out of the dishwasher. They make it look easy but if you look at the dishwasher they are using you will realize that it is brand new. So everything comes apart and goes together smoothly for the
... Read morem. That is not how it happens in reality. I am a woman of average size and had never done any kind of repairs to a dishwasher before. So, it was not easy. I was however able to get it apart and put back together. And now it works!!
Read less
Lana from PERRY, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable)
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brian
April 26, 2019
Dishwasher is filling however no spraying out of the sprayers and it will draining after some time goes on its cleaning cycle.
For model number WDF520PADM7
Hi Brian, thank you for your question. There are a few parts that you should check when you are having this issue. The first parts to check would be your filters and tubing and spray arms. You will want to check that there is absolutely no debris blocking the paths for the water to run smoothly. You may also want to take a look at your water inlet valve as well and make sure enough water is going into the appliance. If those parts are all fine, then the problem might actually be in your Pump and Motor. I hope that helps. Good luck with your repair.
10 people found this helpful.
Was this helpful?
Thank you for voting!
Luis
June 7, 2023
Could you Please clarify what parts are included on the motor and pump assembly part.
For model number WDF520PADM9
Hello Luis, thank you for the question. The pump and motor assembly includes the following parts:
1. Cover, part number PS11755007.
2. Sump, part number PS11755471.
3. Grommet, part number PS11756098.
4. Circulation pump, part number PS16744934.
5. Hose, part number PS3651318.
We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Matt
November 23, 2021
Does the pump #W11025157 have a heater built in, my water is not getting hot?
For model number WDF520PADM7
Hello Matt, Thank you for the question. The Pump does not come with a built in Heater. There is a heater element at the bottom of the tub, PartSelect Number PS8260087. We hope this helps!
Dishwasher fills, sounds like pump is making a noise but nothing then it goes and drains. Is it circulator pump or pump and motor?
For model number WDF330PAHW4
Hello Lauri, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the circulation pump, part number PS16744934, to fix the issue. We hope this solves your problem!
