CLIP W10919676

Hello Richard, thank you for your question. This is a dispenser guard clip. It prevents the rack from banging into the dispenser on the door.

Hi Michael, Thank you for your question. If you look at your diagram right underneath this part information, you will see how this part is supposed to be oriented before you try to install it. Unfortunately the only way to really explain how this part is installed is by saying: The rounded channels fit onto the bars of the upper rack. You start with the bottom half of the piece and then clip in the top. If you need further instruction you will probably have to contact your manufacturer. I hope that helps. Good luck with your repair.

Hello Gary, Thank you for contacting us. Yes, this part is interchangeable for either side of the rack. Have a great day!

Hello Marilyn, Thank you for the question. You can send your question along with picture to customer service at customerservice@partselect.com. We hope this helps!

Hi Jason. I recommend taking a look to make sure the rail and the rack adjuster is not damaged and on correctly. Thank you for your question and good luck with your repair.

Hello Keith, Thank you for the question. Here is a link to a video for the upper rack installation and the parts that connect tot he rack. Hope this helps! https://www.youtube.com/watch?time_continue=91&v=JbzMzGEinb0

Hi Brian, Thank you for your question. If you look at your diagram right underneath this part information, you will see how this part is supposed to be oriented before you try to install it. Unfortunately the only way to really explain how this part is installed is by saying: The rounded channels fit onto the bars of the upper rack. You start with the bottom half of the piece and then clip in the top. If you need further instruction you will probably have to contact your manufacturer. I hope that helps. Good luck with your repair.

Hi Debra, Thank you for your question. These clips are referred to as dispenser guard clips. This clips onto the upper dish rack. The rounded channels fit onto the bars of the upper rack. I hope this helps. Thank you and have a great day!

Hello Bhavani, Thank you for your inquiry. This part clips on the front of the upper dishrack and acts as a bumper between the rack and inner door panel. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hi Sandra, Thank you for the question. This clips onto the upper dish rack. The rounded channels fit onto the bars of the upper rack. Hope this helps!