Average Repair Rating: 3.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No problems
Removed the old panels with a phillips screwdriver. Removed the control panel and put the door latch and the control board into the new control panel the same way they were in the old one. Also have instructions to follow if needed. Replaced the front panel and put the screws back in. The toe and access panels went in easy, the only thing we had to do was touch up those screw with black paint as there were not new black screws in the kit. It was an easy and simple process.
First , I went outside and turned the breaker for the dishwasher off. Next,I removed the screws that held the bottom 2 pieces, that rest on the floo,r in place. Then removed the two beige metal pcs. . Next I replaced them with the 2 black pieces I had ordered and secured them with the 2 black screws I had received as part of my order. Then I removed the scews from the inside of the door of my KitchenAid Dishwasher. This released both the front bottom panel and the control panel. . I took the beige bottom door panel off and moved the insulation piece from the back of thebeige panel to the back of the black panel. Then I intalled the new black panel I ordered and resecured it with two screws until I had finished with the control panel switch out. I had to unplug an electronic tape from the inside of the beige control panel and plug the same tape back into the black control panel. I also had to remove the beige handle that was on the inside of the control panel, attached to the door, and replace it with the new black one I'd received. I then installed the black control panel and reattached it with screws and finished replacing the rest of the screws I had removed from the inside of the door. I tested the handle to make sure it opened the door and locked it like it should and then went outside and turned the breaker back on. Came in and turned on the dishwasher and did a load of dishes. It looks awesome, matches the rest of my black appliances and I am very proud to have done it myself. I also wanted to thank the customer service lady who was so great to work with on the phone. I would shop with you again.
Removed the toe panel and replaced. Removed the front panel and replaced. Removed the control panel, disconnected the ribbon wiring and replaced with the new control panel. Reconnected the ribbon wiring and secured the panel with the six screws..
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Suzanne
January 22, 2020
Hi, i want to change the front panel of the door from white to stainless steel and the kick plate to black. Can you specify all the parts i need to order please. Thanks
For model number KDTM404EWH1
Hello and thank you for writing.
Door panel stainless steel PS11769434.
Kickplate black PS11769017.
We hope this helps. Please contact us anytime if you require further assistance.
Need a placement floor panel. Black. I can not seem to find the size to make sure it will fit. Can you help? It covers the floor to the bottom on the door. It broke after all the years of use.
For model number 6651577580
Hello Carolyn, Thank you for the question. I looked up the part and it is listed as No Longer Available/Discontinued sorry. There are no part substitutions listed. Our suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. We hope this helps.
Was this helpful?
Thank you for voting!
Travis
April 20, 2023
What is the part number for the screw needed to affix the kickplate to the access panel? Part 10 in the diagram for the access panel
For model number KDTM404ESS0
Hi Travis, Thank you for writing. The Black Screw for this model would be PartSelect Number PS11740645. We hope this helps!
