
Lint Filter (White Frame)
$37.48
In Stock



Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11767017
Manufacturer Part Number WE18X25100
Manufactured by
GE
Product Description
Lint Filter (White Frame) Specifications
This is a lint filter screen that is used for many dryers. It has a metal screen with a white plastic frame, and is approximately 13 inches wide. This part is sold individually. The lint filter traps lint while clothes are being dried and prevents the lint from building up in clothes and internal parts of your appliance. Neglecting to clean your filter on a regular basis can negatively affect the operation of your dryer and is also a fire hazard. Be sure to clean your filter on a regular basis. Installation is easy, simply slide the filter in and out of the filter slot.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Takes too long to dry | Noisy | No heat or not enough heat
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint.
Part# WE18X25100 replaces these:
AP6037511, WE18M0019, WE18M0021, WE18M19, WE18M21, WE18M22, WE18M23, WE18M25, WE18M27, WE18M28, WE18M29, WE18M30
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ED
September 8, 2017
Will lint screen this part fit dryer model above? Thank you.
For model number DVLR223EG1WW

Hi Ed,
Thank you for contacting us. Yes, this is the correct part for your model number. Good luck with your repair.
14 people found this helpful.
Was this helpful?
Thank you for voting!
Pat
March 3, 2018
Will this be the correct lint screen for my model of dryer?
For model number DBXR463ED1WW

Hello Pat,
Thanks for your question. Yes, this is the correct lint screen for your model.
I hope this helps.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Julie Corrow
April 13, 2018
Looking for piece that goes behind lint catcher looks like a waffle
For model number DBXR463Eg1WW

Hello Julie, Thank you for your inquiry. That is part of the lint trap duct assembly, part# WE14X21334. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Henry
May 23, 2019
Is this part same as DPXR473EW0WWlint screen. For GE profile dryer
For model number DPXR473EW0WW

Hi Henry, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Roberta
April 25, 2018
Will this filter fit this dryer -before I order it.
For model number DVLR223GE0WW

Hello Roberta, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11767017. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Alton
March 30, 2018
Is lint filter ps1482138 the same as ps11767017? I ordered the first # lint filter on 2/8/11. I need a new one again.
For model number DBLR333EG0WW

Hi Alton, Thank you for the question.Yes, these two filters are the same part. Checking the model number provided the PS11767017 is listed as the correct part. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Mary
February 28, 2019
Is this part compatible for dryer serial no lr700840a? If so ordering asap
For model number DPXQ473ET2WW

Hi Mary,
Thank you for your question. Yes, this lint filter will work with your dryer. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
SUSAN
March 28, 2019
Will this lint filter fit model number dryer listed above? Want to be positive before i place my order..... thank you
For model number DBSR453EB3WW

Hello Susan, thank you for your inquiry! We can confirm that lint filter PS11767017 will fit your model DBSR453EB3WW. I hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ericka
April 23, 2019
It is taking 2 cycles to dry. What could it be?
For model number HTDX100EM6WW

Hello Ericka, thank you for inquiring. For this symptom you will want to replace either the 4 Wire Cycling Thermostat part PS267926, the Duct Felt Seal part PS9861764, or the High Limit Thermostat part PS267900. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
November 8, 2019
Our dryer has a lot of lint that gets past the lint filter and comes out the vent hose. Will a new lint filter solve this problem?
For model number HTDX100ED6WW

Hi Gary, we cannot guarantee this is the fix but it does seem to be a likely cause. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 25 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer making grinding noises
We live in a Condominium, space is tight especially in the Utility room where the washer/dryer are located. Turned dryer breaker off at the electical panel.
Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect.
Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect.
-
Edwin from Seattle, WA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers, Socket set
-
267 of 404 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
only orderd two sliders needed four
easy no problem
-
William from Leesburg, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
35 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacement of holed lint screen
straightforward swap, just form the top rail and click it in
-
Mark from Clarksville, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WE18X25100
29 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Horrible screeching noise when the dryer drum was in motion, cracked pieces were tangling and ripping the drying clothes.
I removed the top of the dryer (unscrewed from the inside to release the top). Removed interior screws to pull open the front of the dryer. Once inside, it was really visible that the old parts (front air duct top and bottom) were in bad shape. They were cracked and broken. I removed the old pieces (they pretty much cracked and crumbled right off). I snapped in the new pieces careful to avoid damaging the electrical connections and wires. Once snapped into place (top and bottom), I careful put the front back into place making sure that the dryer drum rested on the new pieces. All screws back in place and all done! Dryer is now working as new!!!
-
MonaLisa from Bronx, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
-
27 of 47 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
new lint filter
my problem was easy, i orderd a new lint filter, for a
dryer that is at least 10y/o. it came to me by FEDEX,
in 3 days. i threw out the old one and put in the new
one. easy peasy. i will say that this website had what i
wanted and got it to me very quickly. good job by
PARTSELECT......
dryer that is at least 10y/o. it came to me by FEDEX,
in 3 days. i threw out the old one and put in the new
one. easy peasy. i will say that this website had what i
wanted and got it to me very quickly. good job by
PARTSELECT......
-
william from simi valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WE18X25100
19 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lint filter was broken
took out broken filter and replaced with new lint
filter.
filter.
-
bill from clarendon hills, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WE18X25100
16 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A damaged filter had been put into the dryer
The part was delivered in record time. That was the best part. And it fit perfectly and was the correct color. The other filter was grey and the dryer is white. Thanks for being so efficient.
-
Kay from Ontario, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WE18X25100
15 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken dryer nob, broken lint screen.
Both parts arrived quickly and were exactly what I ordered. The lint screen replacement part was of higher quality and it works better than the one that came with the dryer. Very satisfied.
-
Thomas from Bloomington, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
14 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old lint filter was cracked from use
Ordered new lint filter, received it in 2 days, removed old filter, snapped in new filter, patted myself on the back .
-
Frank from Jacksonville, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
Parts Used:WE18X25100
13 of 20 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob had cracked and would no longer turn. The lint filter had a whole in bottom
Just took out of plastic wrapping and put on dryer. No tools needed.
-
Robbi from UNION, SC
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
-
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jerry C - October 22, 2020

Lint filter
Simple installation, perfect fit.
Gail T A - October 1, 2020

Just beautiful.
Got it, very satisfied. Thank you.
Learnte S - August 19, 2020

Great find
I looked for this part from the manufacturer but they didn't have it. I was so happy to find it on PartSelect. Now I can continue using my dryer.
Thomas B - June 30, 2020

Easy replacement
Looked just like the old one except the handle portion was not broken. Also it is a bit expensive.
Ronald H - June 23, 2020

Works as exspected
Hopefully this holds better than the plastic one did.
Patricia P - June 4, 2020

Dryer Lint Vent
The lint vent came in timely fashion. The piece fit in the ddryer perfect. If I need anything else I will order it here. I'm very pleased.
Tennia S - May 26, 2020

Easy repair
The part was in great condition, brand new, fit perfect in our dryer. I will continue to order dryer parts from this company if I ever need them in the future.
William S - May 5, 2020

easy to order!
part arrived as described and works perfectly!
JAMES J - April 29, 2020

White Frame Lint Filter
The part was in great condition and it came fast.
James H - March 24, 2020

Fantastic
This is a great deal.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11767017
Manufacturer Part Number: WE18X25100
Manufacturer Part Number: WE18X25100
Brand
Model Number
Description
