GE/GE_Thumb/00122379i04.gif
See part 1445 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

SWITCH MONITOR INTERLOCK

★★★★★
★★★★★
4 Reviews

Rated by 2 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JE1360WA01!
 Fits your JE1360WA01!
PartSelect Number PS11766871
Manufacturer Part Number WB24X25397
Manufactured by GE
You May Also Need?
Product Description

SWITCH MONITOR INTERLOCK Specifications

This is the replacement monitor switch for your microwave. It is black in color and measures approximately 1 inch by ¾ of an inch. This switch monitors the door latch position of your microwave and communicates to the electronic control board whether the latch is open or closed. If the switch is damaged, your microwave may not start, even though the door latch is closed. You can check the continuity of the switch by using a multimeter. Be sure to disconnect the microwave from power before you begin this repair.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Won’t turn on | Doesn’t shut off | No heat
This part works with the following products:
Microwave, Microwave Oven Combo, Range, Wall Oven.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB24X25397 replaces these:
WB24X0817, WB24X10112, WB24X817
Questions and Answers

Be the first to ask our experts a question about this part!

Customer Repair Stories
 Average Repair Rating: 2.7 / 5.0, 2 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The power was on but the Microwave would not start.
This is an above the range microwave, use 2 people to remove it. I set it on a table and removed the outer cabinet. I then used jumper leads to discharge the capacitor. I removed the control panel (taking a picture to ensure proper wiring on assembly), then I removed the latch board. Once I had the latch board out I removed the monitor switch (which is the middle switch) and tested it for continuity. This is a normally closed switch. I tested the other two switches as well and found these (normally open) switches for continuity to be good and the monitor switch to have a short. This switch should show continuity when the door is open and should show no resistance when the door is closed. (Take care removing the switches) After I received the parts I installed them in the new Locker Holder and installed the latch board (ensure to follow the latch board adjustment steps located in the control board). I then attached the wiring to the control board and then plugged in the unit. I tested the unit to ensure it functioned correctly. I then installed the outer cabinet, and then installed the unit above the range (Use 2 people for this process). Overall an easy fix you just need to ensure you follow safety procedures (especially when dealing with capacitors.
Take a lot of pictures of the wiring and of the components and take care with the latch board or you'll have to buy a new one when all you really needed is a monitor switch.
Other Parts Used:
HOLDER LOCKER
  • William from KINGMAN, AZ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad door switch and divide
Remove upper grill, then control panel, then 2 screws hold door switch mounting bracket, that will let you roll the switches out to work on them. Remove each switch by carefully pushing back retainer clips. Diode a long pair of needlenose pliers is helpful. The control board in front of capacitor comes out with a flat screwdriver and pry up. Removing grnd wires helps
Other Parts Used:
Diode Cable Primary Door Interlock Switch
  • Robert from COLORADO SPGS, CO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
3.5
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11766871
Manufacturer Part Number: WB24X25397
Brand
Model Number
Description
Kenmore
36363672200
Microwave
Kenmore
36363673200
Microwave
Kenmore
36363674200
Microwave
Kenmore
36363679200
Microwave
Kenmore
36363692301
Microwave
Kenmore
36363693301
Microwave
Kenmore
36363694301
Microwave
Kenmore
36363699301
Microwave
General Electric
CEB1590SS1SS
Microwave
General Electric
CEB1590SS2SS
Microwave
General Electric
CEB1590SS3SS
Microwave - MICROWAVE
General Electric
CPLMB186KCB
Hotpoint
CSA1201RSS01
Microwave
Hotpoint
CSA1201RSS02
Microwave
Hotpoint
CSA1201RSS03
Microwave
General Electric
CSA1201RSS04
Microwave - MICROWAVE
General Electric
CSA1201RSS05
Microwave - MICROWAVE
General Electric
CSB9120SJ1SS
Microwave - MICROWAVE
General Electric
CSB9120SJ2SS
Microwave - MICROWAVE
General Electric
CSB9120SJ4SS
Microwave Oven Combo
General Electric
CSB912M2N1S5
Microwave Oven Combo
General Electric
CSB912M2N2S5
Microwave - GE Cafe Microwave Or Advantium
General Electric
CSB912P2N1S1
Microwave
General Electric
CSB912P2N2S1
Microwave - GE Cafe Microwave Or Advantium
General Electric
CSB913M2N1S5
Microwave
General Electric
CSB913M2N2S5
Microwave - GE Cafe Microwave Or Advantium
General Electric
CSB913P2N1S1
Microwave
General Electric
CSB913P2N2S1
Microwave - GE Cafe Microwave Or Advantium
General Electric
CSB913P3N1D1
Microwave
General Electric
CSB913P3N2D1
Microwave - GE Cafe Microwave Or Advantium

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service