Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
April 26, 2023
Are the two perforated flaps, located immediately inside the housing opening, sold separately?
For model number WED92HEFW1
Hi Jack,
Thank you for your question. The outer grille, part number PS12114427, is sold separately. We hope this helps!
Can the grill out be removed to clean the lint inside the dryer?
For model number WGD70HEBW1
Hi Susan, thank you for your inquiry. We have found that you can simply pull out the lint filter inside the dryer to clean, but in order to remove the grill-out, part number PS12114427, follow the instructions: unthread the rear screws securing the top panel. After that, disconnect the control panel wire connector from the control board. Now lift up the front of the dryer, lose the two middle screws. Now unthread the two screws securing the front panel. After that, unthread the three top screws to lift the front panel up, securing the lint filter. Install the new lint filter housing by aligning it on the front. Tighten the three screws to secure, insert the lint filter in to new housing and reassemble everything. We hope this sorts out your problem!
Good morning:
Currently, I have a WHIRLPOOL dryer model: 7MWGD75HEFW0 (capacity 17 KG)
Inside the HOUSNG-OUT W10906551 part, there are 2 x plastic hinges, which bend when the Lint Filter WPW10516085 is inserted. Do you sell those 2 x plastic hinges separately? (those plastic hinges are one on the left and one on the right of the entrance to the HOUSNG-OUT W10906551)
For model number 7MWGD75HEFW0
Hi Alejandro, thank you for the question. The lint screen door cover compatible with your model is part number PS12347731. It helps the lint screen to stay in place and collect lint properly. It is sold individually. You may need to order them separately for left and right side. We hope that helps!
