Part Location Diagram of WR07X26748 GE Compressor Start Relay
See part 733 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Compressor Start Relay WR07X26748

★★★★★
★★★★★
3 Reviews

Rated by 3 customers 

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

$ 16.90
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11766700
Manufacturer Part Number WR07X26748
Manufactured by GE
Product Description

Compressor Start Relay Specifications

This part is the replacement compressor start relay for your refrigerator. It is made of black plastic and is approximately 1 ¼ inches long and 1 inch wide. The compressor start relay attaches to the compressor and helps to start the compressor motor. If the compressor will not start, or if your refrigerator or freezer is too warm, you may need to replace the compressor start relay. This part is sold individually. It is an OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Fridge too warm | Freezer section too warm | Won’t start
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
General Electric, Hotpoint, Kenmore, RCA.
Part# WR07X26748 replaces these:
AP6034304, WR07X0192, WR07X0194, WR07X0214, WR07X0216, WR07X10035, WR07X10051, WR07X10064, WR7X10035, WR7X10064, WR7X192, WR7X194, WR7X214, WR7X216
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
4.7
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.3 / 5.0, 3 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
refrigerator would not get cold
got on part select web site and found other customers that had same problem and on their site they had comments from them to fix problem. I then took off back panel on frig where compressor is by removing 6 screws and found the relay attached to the compressor then pressing down on holding spring removed 2 wire alligator clips and it was bad ordered one from part select put the new one on an frig was fixed. entire fix took about 30 minutes from isolating problem to fixing it. thank you part select
  • George from BERLIN, MD
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Does not start , trips breaker
I pried the relay from compressor with small screwdriver, cut and replaced burnt wire going to relay,pushed new relay on compressor and wires unfortunately it did not fix the problem.
  • Paul from RNCHO CORDOVA, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer & Frig Were Not Cold
First I removed the rear cover, located at the bottom of the refrigerator. Then I cleaned out the dirt & dust on and around the compressor. The relay has a cover, that is secured with a spring loaded clip. To release the clip, push in with your fingers, while disengaging the end clip with a screwdriver. Once one side is off the other lifts off. Remove cove exposing the relay. There is one wire terminated, with a spade clip, remove it. With a strait blade screwdriver, pry the relay off the 2 post it slides on to. (Don't be surprised if it breaks into pieces, as they are sometimes brittle. ) Slide the new relay onto the 2 posts, replace the wire onto the right terminal, and replace the relay cover & clip. Replace the rear cover. Plug in and test.
  • Sam from Cooper City, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
74 of 101 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gregory
October 21, 2022
Will this part replace the other two parts that were burnt up cause the compressor ran all the time and wouldeng get cold
For model number 596.58642890
PartSelect logo
Hello Gregory, thank you for reaching out. The part you are requesting is not compatible with your model. The compressor start device and capacitor, part number PS8746522, will replace your damaged components and resolve your problem. This part includes both the run capacitor and the start relay. If you require assistance to place an order, please contact customer service. We hope that helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Kevin
August 21, 2023
Fridge won't cool keeps clicking . Will this and capacitor replacement fix the issue? Every now and then it will click off and run but just started the constant clicking and no cooling
For model number GTS18DCPARWW
PartSelect logo
Hi Kevin, thank you for getting in touch. Based on the description that you have provided, we would recommend to replace the compressor start relay, part number PS11766700, to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Lubo
February 21, 2024
My g refrigerator stop working compressor is not working but warm enoughand. And relay clicking, sometimes like between one minutes a minute and a 1/2. So I have to buy a compressor startt delay or overload or both thank you. All fans working
For model number GTS22JBPCRWW
PartSelect logo
Hello Lubo, thank you for contacting us. Based on the description that you have provided, we would recommend checking the compressor. If it is faulty, then you may need to replace the compressor kit part number PS8768493, to solve the problem. Maybe the compressor is drawing more current than rated and the relay is trying to shut it off. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11766700
Manufacturer Part Number: WR07X26748
Brand
Model Number
Description
General Electric
36130-5
Refrigerator
General Electric
36211XBMBRWW
Refrigerator
Kenmore
3638400410
Refrigerator
Kenmore
3638400411
Refrigerator
Kenmore
3638400414
Refrigerator
Kenmore
3638400417
Refrigerator
Kenmore
3638400480
Refrigerator
Kenmore
3638400481
Refrigerator
Kenmore
3638400484
Refrigerator
Kenmore
3638400487
Refrigerator
Kenmore
3638480611
Refrigerator
Kenmore
3638480681
Refrigerator
Kenmore
3638500410
Refrigerator
Kenmore
3638500411
Refrigerator
Kenmore
3638500414
Refrigerator
Kenmore
3638500417
Refrigerator
Kenmore
3638500480
Refrigerator
Kenmore
3638500481
Refrigerator
Kenmore
3638500484
Refrigerator
Kenmore
3638500487
Refrigerator
Kenmore
3638500510
Refrigerator
Kenmore
3638500511
Refrigerator
Kenmore
3638500514
Refrigerator
Kenmore
3638500517
Refrigerator
Kenmore
3638500580
Refrigerator
Kenmore
3638500581
Refrigerator
Kenmore
3638500584
Refrigerator
Kenmore
3638500587
Refrigerator
Kenmore
3638502510
Refrigerator
Kenmore
3638502513
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service