Part Location Diagram of W10887190 Whirlpool Light Bulb
See part 6 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Light Bulb W10887190

 Fits your JRSI22L!
★★★★★
★★★★★
1 Review

Rated by 4 customers 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 20.91
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your JRSI22L!
PartSelect Number PS11765660
Manufacturer Part Number W10887190
Manufactured by Whirlpool
Product Description

Light Bulb Specifications

This appliance light bulb is used for many Maytag brand refrigerators. This 40W light bulb is frosted. Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Refrigerator, Freezer.
This part works with the following products:
Maytag, Amana, Admiral, Whirlpool.
Part# W10887190 replaces these:
14201152, 2160708, 2257556, 55771, 55771-1, 55771-2, 61001787, 8170385, A0282807, A0282807A, W10194424, W10311528, W10886958, WPW10311528
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
I had ice building up inside on the bottom of my freezer and a buzzing sound coming from inside the fridge towards the top right
After doing some reading on the internet, someone had mentioned that the drain hole in the freezer might be clogged. Of course, I did not know where to look exactly. I heard the buzzing sound one day and opened the fridge. I placed my hand right under the area that was concealed and isolated roughly (by touch) where the noise was coming from. I started to pull off the cover where the water filter was and started unscrewing with a nutdriver and screwdriver about 5 to 6 screws until I loosened things enough to get the cover off partially. I felt a part and also found a diagram of the fridge. The part felt hot to the touch. After looking at the diagram, I realized that it was the adaptive defrost timer making the noise. I decided to order the part because it was worth it to try fixing and while everything was open, I figured I'd change all the light bulbs as well. Luckily, I have another fridge in my basement and moved all food to that fridge. I unplugged the troublesome fridge and let it defrost. I also removed all the shelves from the freezer and fridge so they could be cleaned. I did not take any pictures, so it took me a while to put them back when it was time. I also located the evaporator in the freezer section. I had to unscrew the back cover to get to it. I noticed that that area behind the cover was also iced up, so I found the source. Sure enough, the drain plug was clogged and water started to accumulate. I unscrewed the evaporator from the top and sheet metal pan from the bottom and removed the pan. I opened up the bottom rear of the fridge so I could located the drain hose and drip tray it fed into. I noticed the pan was totally dry. I removed the hose from the drain plug and stuck an awl from the bottom of the plug going into the freezer and finally dislodged whatever dust and grime was in there and the water started coming through. I then took a can of compressed air and shot it into the drain plug. I also shot compressed air onto the condenser and fan to clean things up a bit (make it a little easier for the condenser to release its heat). I reinstalled the drain hose and ran some white vinegar from the inside. It flowed nicely into the pan. I dried everything up. I also decided that this was the perfect time to clean the fridge and all of its components on the inside (it is a side by side - so both the freezer and fridge area). This took some time, especially disassembling the drawers. At the end, after replacing all bulbs except the 2 small ones by the control area, I removed the old adaptive defrost timer and it took me a good 15 minutes to line up the new one. The new one is bigger than the old one and also encased. I had a hard time getting the plug on since it was hard to see. I was putting this in while the control section was hanging down at a 35 degree slant. Room was limited. I managed to connect the plug and then had to position the ADT so it would fit in its spot perfectly. Only then was I able to put the screws that hold it there. It needed to sit perfectly in there, which it did. I changed the 2 bulbs and put everything back together. Of course, in the middle of all this, I had a video on your site explaining how to remove the control panel and install the ADT. Pretty funny stuff. Pretty much did it the same way. Getting the cover off is a little difficult because the back left corner gets caught even when you pull down on it. It took me a while to realize where the cover was getting stuck. Nevertheless, I finished the repair and the fridge seems to be working great for now. I am keeping my I on it. I haven't heard any buzzing noises and no ice has built up on the bottom of the freezer yet. In fact, this is the quitest my fridge had been for a long time. Hopefully, it was last a few more years. Knock on wood.
Other Parts Used:
Adaptive Defrost Board Light Bulb Light Bulb - 40W
  • John from Fair Lawn, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Bulb burned out and the shield was melted and deformed
Removed the light bulb and shield, no tools needed.

Removed the bottom shelf of the refrigerator and the top meat drawer. My 12 year old inserted the light bulb and shield, then we replaced the shelf and drawer.

Very easy.
Other Parts Used:
Light Bulb Shield Light Bulb
  • Maurice from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
6 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer cold/reefer hot
Took out all shelves and racks. Pulled out plastic cover. Removed screws holding control unit. Removed unit and accresses defrost circuit board. Replacement is in a cover. One screw would not engage so did not put it back in. Reefer was cold within hour of start and is now 1 week after. Unit would start out cold and then warm up before replacement.
Other parts were snap in furnishings that had become damaged with use.
Other Parts Used:
Air Return Cover Adaptive Defrost Board Crisper Drawer Shelf Support Light Bulb
  • Mark from Wyoming, RI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light Bulb Blew Out In Fridge
Screw bulb in and place cover over bulb.
  • Thomas from Augusta, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Linda
November 20, 2017
I need a new light bulb for my Admiral refrigerator, but i don't know which one to choose.
For model number HMG211470
PartSelect logo
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11765660.This sixty watt light bulb is frosted and Sold individually.Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11765660
Manufacturer Part Number: W10887190
Brand
Model Number
Description
Kenmore
10642102300
Freezer
Kenmore
10642102301
Freezer
Kenmore
10642104300
Freezer
Kenmore
10642106300
Freezer
Kenmore
10642106301
Freezer
Kenmore
10660832100
Refrigerator
Kenmore
10660832101
Refrigerator
Kenmore
10660832102
Refrigerator
Kenmore
10660834100
Refrigerator
Kenmore
10660834101
Refrigerator
Kenmore
10660834102
Refrigerator
Kenmore
10660842100
Refrigerator
Kenmore
10660842101
Refrigerator
Kenmore
10660842102
Refrigerator
Kenmore
10660844100
Refrigerator
Kenmore
10660844101
Refrigerator
Kenmore
10660844102
Refrigerator
Kenmore
10661102111
Refrigerator - REFRIGERATOR
Kenmore
10661103111
Refrigerator - REFRIGERATOR
Kenmore
10661104111
Refrigerator - REFRIGERATOR
Kenmore
10661109111
Refrigerator - REFRIGERATOR
Kenmore
10661182900
Refrigerator
Kenmore
10661182901
Refrigerator
Kenmore
10661184900
Refrigerator
Kenmore
10661184901
Refrigerator
Kenmore
10661189900
Refrigerator
Kenmore
10661189901
Refrigerator
Kenmore
10661912100
Refrigerator
Kenmore
10661912101
Refrigerator
Kenmore
10661912102
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service