ELMNT-SURF

Hi Ken, Thank you for the question. The oven has the top Broil Element and a bottom Bake Element. The surface element is not for inside the oven but the top of the stove for the cook top. Hope this helps!

Hello Bob, Thank you for your question. Be sure to cut power to your appliance and remove any parts before doing tests. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your element. It should be reading between 0 - 50 ohms to be working correctly. Part number PS11764917. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity, then the switch is the issue. It could also be your wiring that is the issue, but you should see visual damage on that part in most cases. Unfortunately, the switch and wires have been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute, and then you are always welcome to check back to see if we carry the part. We hope that helps. Good luck with your repair.