Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
This element can be used for the left front or right rear.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
AP6030932, 04100415, 0E00602299, 12500039, 3189893, 3189903, 3196428, 71001423, 74001011, 74002651, 74002653, 74005476, 7406P034-60, 7406P053-60, 7406P058-60, 7406P074-60, 8185657, 8203553, W10823736, WP74002653
...
Show more, Y04100415, Y0E00602299 Show less
Customer Reviews
Average Rating:
★★★★★
★★★★★
3 Reviews
5.0
Filter By Rating:
5 Stars
3
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Walter W - June 14, 2021
Verified Purchase
Excellent Replacement Part - Delivered as Promised
Very seamless experience! No delays and no issues!! Got the part, replaced it right away and everything is as original!! Saved literally $100's.... Highly Recommend!
★★★★★
★★★★★
Terry B - October 27, 2018
Verified Purchase
Stove is repaired
Fast shipping from Partselect the new element was quite a bit different than the old element but I figured it out and the stove is working great
★★★★★
★★★★★
Cindy S - May 9, 2020
Verified Purchase
Easy repair. Works a designed
Part came on time in good shape.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.6 / 5.0, 15 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replaced Burned-out Cooktop Element
Exact fit, but read the instructions! Male connectors on element are labeled 1A 1B 2A 2C, very faintly etched in the ceramic. Even though the old and new elements look the same (and I took photos to aid installation), the connector locations are different -- 1A on the old element is where 2B on the new one is, etc. Used included exten
... Read moresion wire for one that would not reach with the new configuration and everything works perfectly.
Read less
Seth from Old Orchard Beach, ME
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Right rear burner under glass no longer would heat
Turned off power to cooktop and double checked Lifted up entire cooktop and rested it on two pieces of wood that spanned gap underneath Removed screws from around edges to free the metal framework that holds the cooktop in place-- this requires spinning the cooktop a bit to get access to the back. Lifted metal framework off
... Read more Lifted glass from cooktop off Checked configuration of power plug ins against new part and noted where they should go. There was a slight difference of how plugs were arranged, but it was easy to logic out. Removed old burner unit and plugged in new one. Ensure that nothing was touching contacts. Replaced the glass top onto cooktop Put metal frame back in place and screwed in Lifted entire cooktop, removed boards, and lowered back into place
Read less
John from Maple Valley, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element burn out. Would not heat
Turn Circuit breaker off.Open the Oven door removed the 2 screws to the top surface. Disconnect the wire harness mark and remove the wires from the Old Element, removed the screws holding the element to top surface, Remove element replace with new element. Install wires, install screws, reconnect wire harness reposition surface. Reinstall
... Read more screws and turn Circuit breaker power back on. Done and Done
Read less
Dennis from AIKEN, SC
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The 6" heating element stop working on the stove top.
First I reviewed a video on YouTube by this site. Even though the range on the video was not the same as mind, it gave me an idea on what to do. I proceeded to pull the rang out from the wall and disconnected the power plug. Next I removed two screws from the back located on the left and used a flat blade screw driver to depress two brack
... Read moreets on the front to release the glass top panel. I unplugged the wiring harness and disconnected the grounding wire and took the glass panel off and laid it upside down on the kitchen table. I removed the old heating element first by unplugging the wiring and removing the brackets that held it in place. Installed the new one, plugged in all wirings, brackets, screws and replace the top back on the stove.
Read less
JULIUS from JACKSON, MI
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small burner on glass top stove stopped working.
First, the diagram on your website said remove two screws. The diagram looked like they were on the back of the stove on each side. On my stove there were three screws that were visible under the front lip upon opening the oven door. I removed the top, which comes completely off and set it aside. Be careful when removing the top. Don
... Read more't drag it out, otherwise you'll tear up the asbestos around the other burners. Two people would be better for the inexperienced people. The new elements have been redesigned, so the diagram doesn't fit what you are looking at. Plus, the diagram on paper is looking underneath the element when you are looking down on the top of the element. I removed one wire and put it in the same spot on the new. Turned out it was not the element that was bad. It was a loose wire in the inside of the control panel.
Read less
REX from VIRGINIA BEACH, VA
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Indicatror Light For 6" Burner Quit Working
Ok this is a glasstop jenn air cce3531b, 5 burners, 11 years old. I am computer data entry employee and 56 years old. I have never done repairs myself in the past but decided to try. I ordered a new burner and indicator light as I wasnt sure which to replace. I found the main breaker and shut it off. I lifted the stovetop out of the
... Read more counter opening by pushing it through the bottom and placed it on the counter with a towel under it, I had plenty of room to work so that was very easy. I used a nutdriver set to remove 12 screws and lifted off the top very carefully and placed it in the other room , since I had to repair unit thought I would also clean and replace the foam tape around the perimeter of the glasstop. Ok now I unscrewed 4 more screws with the nutdriver and replaced the indicator light, that took about 6 minutes so far. Then I turned the breaker back on and tested and it did not work. Turned breaker back off ,now I replaced the burner by lifting it out of the opening very easily, unscrewed with philips screwdriver 2 screws and the new burner was exactly the same as the existing one so I just slid the old connections off one at a time and replaced them as I went along onto the new burner, screwed it back into place and turned the breaker on and tested it and it worked. I now turned the breaker back off and took off the old foam tape from the glasstop and replaced with new, fit it back onto the base and screwed the 12 screws back in and placed it back into the counter opening and turned breaker back on and now all is fixed and I saved $100 dollars in labor fees. This took 35 minutes and was easy for me. Thanks you partselect
Read less
NANCY from LITTLETON, CO
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
4 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner will not heat, display will not light
Two separate problems. The display gradually dimmed over time and finally went out completely. It was really easy installing the new display module. I analyzed the old one and found an 68uF electrolytic capacitor (<$1) that was bad. Don't know if any other component was bad. In looking at the display module it seems it was way over-priced
... Read more at over $200. The second problem is that one of the small burners had a open heating wire. The installation of the new burner was OK except the new unit did not have any clips to hold it in place. I couldn't transfer the old clips over. So I just placed it under the holding bracket and hoped that it wouldn't move while I was putting the unit back in place and it didn't. So that is working OK now.
First thing- I cut off power to the range. I then removed two screws to allow the cook top to be lifted. I marked the wiring and replaced the burner. Reapplied power and started cooking!
Warren C from Slidell, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
12 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front left burner quit after bright flash under glass top
I ohmed out the burner element that wasnt working and found it was open. I ordered a new element thru PartSelect and installed it in the stove. I powered up the stove and turned on the burner but it didnt get hot. After a bit of testing I found that the new elements safety overtemp terminals werent in the same configuration as the origina
... Read morel unit. I made some wiring adjustments and the burner was operating properly. Thanks PartSelect
Read less
Brian L. from Wilkes-Barre, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
11 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left front burner went out.
Removed 8 screws of retainer holding glass top to box.. Pulled 5 knobs and glass top and set aside. Popped 2 retaining clips holding burner , removed them and transferred to new burner (#12 and #48 position). Used wide blade screwdriver to facilitate removing terminals from old burner and attached terminals to new burner.Popped retaining
... Read moreclips into crossbeam, put glass top on and 8 screws back into retainer. Works great.
Read less
Donald from North Highlands, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
5 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
October 19, 2017
Is element-surf #ps11764912 a small burner and element-surf #ps11759487 the large, single element burner? Thanks, ken
For model number CCE3401
Hi Ken,
Thank you for your question. Part PS11764912 is your small Left Front and Right Rear burner. Part PS11759487 is your Right Front burner. Part PS11764904 is your Left Rear burner. I hope that helps. Good luck with your repair.
5 people found this helpful.
Was this helpful?
Thank you for voting!
Julie
December 22, 2017
I need to replace the left back burner element (6 inch). Can you tell me which of the following parts is correct (and the difference between the two)? W10823711 and w10823704 thank you!
For model number MER5750BAB
Hi Julie,
Thank you for your question. This is your 6" element: W10823711 and part number W10823704 is your warming element. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ric
January 11, 2019
Replaced element and oven sensor but still no heat lites up on board but shuts down 1 min later and beeps
For model number epg9-77a589gf
Hello Ric, Thank you for the question. If the new sensor and element did not fix the issue, the Control Board, Part Number: PS132076 will need to be replaced. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
Is there a video to access the 6" burner and replace it
Hello, thank you for your inquiry! While we do not have any installation instructions for this specific part, it is very similar to the replacement of any element on a glass top stove and the following part has a video that shows how to replace a 6" element from the same manufacturer: https://www.partselect.com/PS11764915-Whirlpool-W10823711-6-Element-with-Limiter-1200W.htm?SourceCode=3&SearchTerm=12002141
2 people found this helpful.
Was this helpful?
Thank you for voting!
Linus
November 13, 2017
Hello, could you explain the difference between these two part numbers? They appear to be or the same size of burners but different prices. Thank you. Part number: ps11764912 and Part number: ps11764903
For model number CCE35318
Hi Linus,
Thank you for your question. Part ps11764903 is 1700 watts and part ps11764912 is 1200 watts. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
September 16, 2022
6” element is burned out.
Replacement #s
PS11764912. (1200w). @$234
PS11764903. (1700w). @$185
Is there any reason why I should not opt for the $50 cheaper, higher wattage element?
For model number DF456577
Hi John, thank you for the question. Part number PS11764903 is not compatible with your model number. The compatible part number is PS11764912. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
September 13, 2019
I need to replace the switch for the large burner (front right) that has the feature that reduces it to a small burner. The stem broke while reinstalling the knob after cleaning. What is the part number for that switch and is it still available? Thank you!
For model number MES5770AA
Hello Mark,
Thank you for your question. The correct switch for the duel burner for your model is under part PS11744018. Hope this helps!
Was this helpful?
Thank you for voting!
Gary
January 23, 2020
Need to replace the left front burner from a jenn-aire flat top stop. It is 6 inches. What part number would work?
For model number CCE3531B
Hello, Thank you for your question. The element you need is: PartSelect Number PS11764912. We hope this helps, good luck with this repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and is estimated to be delivered in 2-3 business days via Standard Shipping.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Range","title":"Range","url":"/Range-Parts.htm"},{"position":2,"name":"Element or Burner","title":"Element or Burner","url":"/Range-Elements-and-Burners.htm"},{"position":3,"name":"W10823704","title":"W10823704","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
